Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Fobvsv Rxa Socwrgegb Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Condition: refurbished (used), Table Size: 1635mm x 460 mm X Long Axis: 1300 mm Y Cross Axis: 700 mm Z Vertical Axis: 500mm Fgjbvcwowh N Uyergsb Spindle Taper: 40 ISO Spindle Speeds: 30-2066rpm Feed Range: 1.6 to 820mm/min Rapid Feed Rates X/Y/Z: 2800mm/min Max. distance between milling head and table 649 mm Machine Weight 3200 kg Machine Dimensions L x 2361mm D x 2500mm H x 1648mm Main Motor 8.7 kW Machine Light Universal Head Coolant Condition: Fully Refurbished (reground, hand scraped and re-aligned) New Screws & Nuts on X, Y and Z

Condition: used, Year of construction: 1977, Technical details: x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm quill travel: 60 mm swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm Fsbvovc Awfocwrgogb table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min rapid traverse: 2.000 mm/min. total power requirement: 6,0 kW machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device 3-way DRO Heidenhain control panel Accessories see photo *

Condition: used, Year of construction: 1996, total height: 2,750 mm, total width: 3,100 mm, total length: 5,500 mm, Empty weight: 8.400 kg - Year: 1996 - Documentation available: Yes - CE mark available: Yes - Serial number: 1107374 Fjbvcowh I Rgswrgegb - Control: CNC - Transport dimensions: 5500mm x 3100mm x 2750mm (l x w x h) - Transport weight [kg]: 8400kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, _____ Description: Year of manuf. : 2014 Control : Heidenhain iTNC 530 Speed : 25000 rpm Movement X/Y/Z : 8000/3500/2500 mm Tool holder : HSK 63 In General: Year of manufacture:2014 Control:Heidenhain iTNC 530 X/Y/Z travel:8,000/3,500/2,500 mm Speed:25,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:25,000 rpm Power:45 kW Tool holder:HSK 63 NC-Swivel head: Technology:Fork head, VH 20 A-axis:+/- 110°, 0.001° C-axis:360°, 0.001° Clamping:Hydraulic Working table: Clamping surface:9,500 x 3,000 mm Max. table load:5,000 kG/m² T-slots:18 H12 Spacing:250 mm Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of tool positions:50 tools Tool diameter max.:125 mm Tool length max.:300 mm Equipment: Measuring systems:Direct in all axes Chip disposal:Chip conveyor Coolant supply:Internal coolant, 40 bar Workpiece measurement:Renishaw RMP 60 Fgebewh E Ezovcwrgjb Tool measurement:BLUM laser Set-up mode:Electronic handwheel

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: 65-P10-CF Zware frees- en boormachine Longitudinale X-beweging van de kolom: 24 meter Kruis Z-verplaatsing van de spindel - diameter: 254 mm - verplaatsing: 2133 mm incl. adapter ISO-60 naar ISO-50 incl. vele verschillende verlengstukken voor spindel- en freeskoppen Kruisbeweging van de kolom in W-richting: 1219 mm (kogelomloopspindel) Totale verticale slag: 3352 mm! Verticale Y-beweging van de kolom: 4572 mm Gewicht machine + draaitafel: 200 ton 4 geharde geleiders geïntegreerde smering Heidenhain CNC-besturing CNC-draaitafel continu: 4500 x 3500 mm Maximaal 60 ton op tafel Dwarsverplaatsing van de tafel: 2000 mm Oppervlakte t-groeftafels: 25.000 x 6.900 mm Gewicht van de T-sleuftafels: 180 ton Longitudinal travel X-axe: 24 000 mm Crosstravel Y -axe: 2133 mm Travel Z-axe (Height): 4572 mm Power on spindle: 85 HP / 65 kW Admission in millingheadspindle (ISO): ISO 60 (dia 254 mm) Febvcev Sfnfowrgogb Max speedrange: 1,5 > 1200 rpm

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Fobvcwsv Rpr Sorgogb NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 1750 mm Y-Axis Movement 1400 mm Z-Axis Movement 650 mm This 5-axis FPT STINGER XL CNC milling machine was manufactured in 2008. Ideal for complex and precise milling tasks, it offers advanced capabilities for a variety of applications. Consider the opportunity to buy this FPT STINGER XL CNC milling machine. Contact us for more information about this machine. Fgobvevz Irxjcwrgsb Application Types Milling

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW weight approx.: 1200 kg Fjbou Nc Nljvcwrgsgb dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included. *

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Febjucphxevcwrgjgb Year of construction unknown

Condition: reconditioned (used), Deckel FP5 NC Toolroom Milling Machine Model: FP5 NC Original Year of manufacture: 1986 Control: DECKEL DIALOG 4 Table Area: 1000 x 550mm 'X' axis Travel: 710mm 'Y' axis Travel: 600mm 'Z' axis Travel: 500mm Spindle Taper: SK 40 Spindle Speeds: 18 - 6300 RPM Spindle Power 7.5 kw 380V - 3 PHASE Machine Weight = Approx 3665 kg's Control cabinet = Approx 460 kg's Fjbvcwjwhwhbsrgogb Splash Cabinet = Approx 300Kg.s The machine is in very good working order. The splash cabinet is included and has been partially restored. New Linear bearings have been fitted for all the door rails & some of the internal panels have been Re-Powder coated. This machine has not had a lot of run hours for its years and still quite a very nice machine. Note: Machine Is currently fitted with Vertical spindle Head. Machine has capability for use with Horizontal milling attachment, however the Horizontal Spindle support arm is not included. The Horizontal Spindle arbors and spacers are however included.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Technical details x-travel 3500 mm y-travel 2200 mm z-travel 1200 mm Control Heidenhain iTNC 530 total power requirement 45 kW weight of the machine ca. 48 t Additional information The milling spindle was renewed / overhauled in November 2024. Operating hours 15918 Fgebjwhu S Revcwrgob Travels: X/Y/Z 3500/2200/1200 mm Table clamping area 3000 x 2000 mm Rapid traverse X/Y/Z 30 m/min. Max. spindle speed 20000 rpm Tool holder HSK A 63 Power 30 kW Torque 80 Nm Equipment: Heidenhain iTNC 530 CNC control Universal milling head with B axis -110°/+110° and C axis -200°/+200° 32-ATC tool changer Coolant through spindle 24 BAR THREE-DIMENSIONAL PROBE HEIDENHAIN TS 460

Condition: good (used), Year of construction: 1998, Control: Fidia CXR with handwheel (new in 2017!) Working areas X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Clamping table Fgjbvcwrsh Dyvgogob Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Milling spindle (new!) Type: HSD ES951 Adapter: HSK63F Cooling: Air Clamping: Pneumatic Maximum speed: 24,000 rpm Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) Suitable materials: Wood, plastic Aluminum Linear axis drives X, Y, and Z axis feed rate: up to 20 m/min X, Y, and Z axis acceleration: up to 1.5 m/s2 Connection data Connected load: approx. 28 kW Back-up fuse: 63 A Dimensions, weight Machine space requirements: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Machine condition Fully functional, regularly maintained by the machine manufacturer. Machine is no longer powered and no longer has a housing! Available immediately!

Condition: new, The LabCenter is ideal for CNC training, but also for the production of small workpieces. The compact and mobile CNC machining center represents the full range of functions of a large production machine. The main spindle rotates continuously variable up to 5000 revolutions and the Siemens 808 control offers an ideal introduction to CNC applications with its simple, intuitive operator guidance. With the ISO 20 spindle taper, automatic tool clamping and a 4-way pick-up tool changer, the LabCenter enables practice-oriented training. Fgsbvcweuy Ihhorgjb

Condition: ready for operation (used), controller manufacturer: Heidenhain, total length: 6,450 mm, total height: 3,200 mm, net weight: 18,500 kg, total depth: 3,700 mm, CNC indexerende freeskop inclusief chiptransportband Fobvcwrswhrxbegsgb 2.5° index Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 3360 x 1000 mm Power on spindle: 18 kW Type of millinghead: ISO 50 Max speedrange: 15 > 2000 rpm

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 5000 mm Measurements depth 10000 mm Measurements height 4200 mm Machine weight 21000 Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Fjbvcwrewhr Icegjgb Spindle speed range 4000 Spindle motor power 32 Tool taper ISO 50 Number of axis 4 Movement X-Axis Movement 3500 mm Y-Axis Movement 1250 mm Z-Axis Movement 1200 mm Table Table load 2500 Tools Number of index 20 Additional Equipment Coolant through spindle: Yes Chip conveyor: Yes Direct measurement on 3 axes: Yes Enclosure: Fully enclosed Tank volume (L): 500 This 4-axis Soraluce TA-35A was manufactured in 2012, ideal for precision CNC milling. Consider the opportunity to buy this Soraluce TA-35A CNC milling machine. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2008, Digital display Travel paths x/y/z 450/350/400 Tool holder: SK 40 Swivelling vertical milling head Speed 5000 rpm All axes with linear guides Ball screws in all axes Coolant system Accessories Fsbvcwewhrf Uergjgb

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Technical details x-travel 750 mm y-travel 400 mm z-travel 500 mm Control Heidenhain TNC 320 spindle turning speed range 3800 U/min transmission ratio 2 tool taper 40 SK table-size 1500 x 670 mm table surface area 1270 x 320 mm table load 600 kg spindle drive 5,5 kW distance spindle /table 100-600 (min.-max.) mm distance spindle center to column 526 mm quill travel 120 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 3,10 x 2,45 x 2,50 m Additional information CNC universal milling machine comes from a swiss company. Year of production: 2010 Fjbvcswhu Swowrgogb First machine installation: 2012 Equipment: * 3-axes CNC-control Heidenhain TNC 320 * Additional handwheels for manual operation * Manually swiveling milling head (45 /90 deg.) with drilling quill * Central lubrication * Coolant equipment * Documentation/manual Maximum machining capacities: Drilling mild steel 40 mm diameter Tapping M 36 Boring 120 mm

Condition: used, Year of construction: 1992, x-travel 710 mm y-travel 500 mm z-travel 460 mm Control TNC 407 accessories and equipment: div. Zubehör und Werkzeug total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 4*3*2,5 m Fgobvcjvfyaiowrgjb Free for a short time from current business resolution ready for operation - see YouTube video ?v=0t82T4F6wVA Otherwise untested, wear and tear due to age and use Equipment: Fixed table 1000 x 500 mm, (12-fold tool changer), electronic handwheel, spray protection cabin, weight 3400 kg. Speed range 40-4000 /min.

Condition: new, The models of the Mark Super series are drilling and milling machines in the best way. They are ideal as a compact drill with a powerful drive and a wide speed range. But these machines also cut a fine figure when milling steel and non-ferrous metals. They are therefore widespread in workshops and maintenance departments for single piece machining, small series production or training departments. Thanks to their compact design and versatility, they are still a bestseller even after 15 years. Fjbvoqcuc Tscwrgsgb

Condition: used, Year of construction: 1996, 1400 mm table-size 2000 x 1300 mm Motor output 75 kW 1040 mm +++++ Please note: Fjbvcewhqy Rswrgogb The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Technical details x-travel 290 mm y-travel 150 mm z-travel 330 mm table surface area 210 x 600 mm tool taper SK 40 total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Fgsbvcjwhu R Howrgeb Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.

Condition: new, The models of the Mark Super series are drilling and milling machines in the best way. They are ideal as a compact drill with a powerful drive and a wide speed range. But these machines also cut a fine figure when milling steel and non-ferrous metals. They are therefore widespread in workshops and maintenance departments for single piece machining, small series production or training departments. Thanks to their compact design and versatility, they are still a bestseller even after 15 years. Febeqcuc Eovcwrgogb

Condition: used, Year of construction: 1999, x-travel 4500 mm y-travel 2000 mm Febvewhqyqocwrgsgb z-travel 1200 mm spindle taper ISO 50 Cube 2 weight of the machine ca. 20.000 t

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, Two DECKEL FP 2 machines are available. Machine in green has the serial number 8070 Stock No. 2372 Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Vertical + horizontal spindle Adjustable angle table Vertical milling head can be swiveled Machine in blue/gray has the serial number 2906 Stock No. 2371 Technical details x-travel 500 mm y-travel 170 mm z-travel 315 mm Table surface 700 x 280 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Fjbvcwewhu N Norgjgb Equipment and accessories: 3-axis digital display Mitutoyo Rigid angle table Vertical + horizontal spindle Vertical milling head swivels Feed and rapid traverse in 3 axes Machine lamp