Condition: like new (used), Year of construction: 2023, DIVISIO 5100 (2023) Machine Type: Automatic Depaneling System Model: DIVISIO 5100 Transport height: 920 mm ± 50 mm Max. transport width: 460 mm Crolov R D Nlen Hkq Asb Interface: SMEMA, Hermes, Siemens Transfer direction: Left to right or right to left Operating side: Front of the machine Fixed rail: Front of the machine Panel length: 70 to 460 mm Panel width: 50 to 460 mm Panel thickness: 0.5 to 5.0 mm Max. panel weight: 1.5 kg Max. PCB weight: 1.5 kg Component height, spindle-side: 8 mm; partial 18 mm (other height on request) Component height, gripper-side: 40 mm Trays on lane 2: 600 x 400 mm Power supply: 400V, 208V 50/60Hz, ±10% Power supply system: 3L + N + PE Fuse protection: 3x C16 A without ELCB Power consumption (without suction): 0.8 kW Air supply: 6 bar Air consumption: 120 Nl/min Machine dimensions (L x W x H): 1200 x 2360 x 2152 mm Weight: 1800 kg (standard equipped) Speed (X, Y): 2000 mm/s Speed (Z): 1500 mm/s Acceleration (X, Y): 20 m/s² Acceleration (Z): 15 m/s² Positioning accuracy: ±0.02 mm (20°C ±1°C) Repeatability: ±0.005 mm (20°C ±1°C) Cutting accuracy: ±0.08 mm (20°C ±1°C) Noise level: < 75 dB(A) (may vary due to material mix of the panel)

Condition: new, Motor power ----- 3.75 KW Speed range horizontal milling spindle ----- 58 ~ 1800 rpm Speed range vertical milling spindle ----- 58 ~ 3000 rpm Vertical spindle mounting ----- ISO 40 Horizontal spindle mounting ----- ISO 50 Table ----- 1650 x 360 mm Weight ----- 2200 KG INCLUDING * 3-axis digital readout brand SINO * Automatic feed work table X, Y, Z * Automatic spindle feed * LED lighting Crsln Hsv Uzn Hjkq Ajb * Cooling system * Luxury control cabinet * Tiltable milling head left/right 0 - 45 degrees * Rotatable work table * Pneumatic pull rod

Condition: used, 52 used recordings Crelnsvyiivj Hkq Asb

Condition: defective spare-parts repository (used), Year of construction: 1980, Functionality: not functional, machine/vehicle number: 2271 / 1701-0527, In use until summer 2024, since then electrical defect, screen black Cslsv Uzhgen Hkq Aerb

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Celnsv Rxa Sj Hkq Aerb Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 170425ä

Condition: reconditioned (used), Universal tool milling machine cover FP1: Csln Hkjhv H Spoq Ajrb Technical data: -Working range X: approx. 300 mm -working range Y: approx. 150 mm -Working range Z: approx. 340 mm -swiveling angular table -Clamping surface: 260x600mm -T-slots: 5 -T-slot width: 12 mm -Spindle speeds:: 20 - 2000 rpm -speed range - vertical: 60 - 1200 rpm -speed range - horizontal: 95 - 1900 rpm -Speed steps working spindle: 12 -feed range: 10 - 500 mm/min -feed steps: 10 -spindle mounting: MK 4 -Pinhole stroke vertical: 60 mm -Total power requirement: 1.7 kW -machine weight approx.: 0.8 t -space requirement approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: -Complete renewal of the electronics (from a professional with circuit diagram!) -Cleaning -polishing of all blanks -New paint -exchange of various signs -Replacement of all standard parts (screws, handles, levers, hand wheels, oil sight glasses etc.) -bearing and sealing of the upper gear shaft -sealing of the coolant pump -Conversion of the feed axles to safety handwheels -reinstallation of the coolant lines -adjustment of the V-guides and axle clamps On request, the machine can be equipped with glass scales in all axes. The machine can be inspected and tested by appointment. The machine transport and various accessories we offer you with pleasure.

Year of construction: 2025, Condition: new, Functionality: fully functional, The “little economic miracle” is now also available as 5 axis machine. On the same mineral diecast basement as our HSC 350 MG the HSC 5A-125 MG was born. Therefore you can mill a 125mm cube (max. part diameter 150mm) from all sides and all directions, without remounting! And even much bigger parts are possible when you do not need all working directions the same time. With only 900kg still easy to handle but solid and strong enough for superior cutting volume and outstanding surface quality. The 40-station HSK-E25 tool changer belongs to standard equipment as well as a water cooled 40.000rpm spindle with up to 6kW power. Croln Hkjv Uw Tloq Aeb Our HSC 5A-125 MG is also extremely space efficient! With only 1060mm x 960mm x 2100mm (LxWxH, without operators panel) it fits through almost every door

Condition: ready for operation (used), Year of construction: 2010, Control Unit Brand HEIDENHAIN Model iTNC 530 HSCI Movement X-Axis Movement 6000 Y-Axis Movement 2000 Z-Axis Movement 1200 Crjlsv Rr R Ren Hkq Aob This 5-axis PROMAC ETESIAN HMC. A PORTALE was manufactured in 2010, ideal for complex and precise gantry milling applications. Consider the opportunity to buy this PROMAC ETESIAN HMC. A PORTALE gantry milling machine. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2007, x-travel 480/500 mm y-travel 230/250 mm z-travel 380/400 mm speeds 45 - 2240 U/min table surface area 1000 x 250 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 3 kW weight of the machine ca. 1550 kg dimensions of the machine ca. 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours Celn Hkqjt Tqw Ds Aerb - Machine light - Machine feet - Operation manual

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 350 mm z-travel 140 mm table surface area 700 x 300 mm spindle taper ISO 40 spindle turning speed range 100 - 4000 U/min distance spindle center to column 395 mm distance spindle nose and table min. 170 -max. 550 mm control TNC 407 Crsln Hetv Idxskq Aob milling feeds 3 + 2000 mm/min rapid traverse 5000 mm/min spindle drive 5,5 kW total power requirement 9 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407,

Condition: good (used), Functionality: fully functional, travel distance X-axis: 825 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 425 mm, Neat, in good condition, universal milling machine with table dimensions 1150 x 250 mm, spindle mounting ISO-40. Equipped with Heidenhain digital readout 3 axes, machine clamp and various tool mountings. Crslsv Ur H Tsn Hkq Asb

Condition: used, Year of construction: 1999, Technical details: Csln Hkjv Rdzbjq Asrb x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm milling spindle motor: 35/30 kW spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head *

Year of construction: 1985, Condition: used, machine/vehicle number: 2810-3870, Fully functional Electric handwheel Dialog 4 control Coln Hksttgt Deq Aerb Many optional accessories Documentation available Electrical documentation available

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Cslev Rpr Son Hkq Aorb Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 170425

Condition: new, Year of construction: 2022, Functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck Csln Hkjv Rppkeq Aerb >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 500 x 500 x 380 [mm] - Table dimensions : 800 x 450 [mm] - Tool type : ISO40 WEIGHT & DIMENSIONS - Machine weight : 1800 [kg] EQUIPMENT - CNC : HEIDENHAIN TNC 355 Crsln Hkqovxw A Ie Aeb

Condition: good (used), Year of construction: 1997, Functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 24,000 rpm, controller model: Siemens CNC 840 D, TECHNICAL DETAILS X travel: 3,400 mm Y travel: 2,700 mm Z travel: 1,500 mm Control: Siemens CNC 840 D C-axis rotation range: +400° A-axis swivel range: +100° Clearance between posts: 2,200 mm Spindle Spindle speed: max. 24,000 rpm Spindle power: 15 kW Tool holder: HSK A63 Tools & Pallets Tool changer positions: 20 Number of pallets: 2 Pallet size: 2,500 × 1,400 mm Celev Uqyxsn Hkq Aerb EQUIPMENT - Gantry design with 5 axes

Condition: used, Functionality: fully functional, feed length X-axis: 1,020 mm, feed length Y-axis: 490 mm, feed length Z-axis: 620 mm, BOMAC CNC MILLING MACHINE MOD. FBL 1000 CNC TABLE 1370 X 400 LONGITUDINAL STROKE : 1020 mm transverse travel : 490 mm VERTICAL STROKE : 620 mm ISO 40 USED MACHINE. Crjln Hev Up Rpjkq Asb INTERNAL CODE: CS 273

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, position of the milling head: Testa automatica universale 2,5 - 2,5 gradi, spindle speed (max.): 5,000 rpm, spindle speed (min.): 30 rpm, table width: 1,500 mm, table length: 3,500 mm, table height: 300 mm, spindle motor power: 42,000 W, FANUC series 31 numerical control X-axis travel mm 3000 Y-axis travel mm 1250 Z-axis travel mm 2000 Rapid feeds X,Y,Z mm/min 30,000 Spindle speed rpm 30-5000 Spindle power S1/S6 kW 26/42 Spindle connection ISO 50 COMPLETE WITH: - 24-position tool changer Crsln Hkov Un Sleq Asb - Automatic universal head 2.5 - 2.5 degrees - Provision for internal spindle water - JECOM stolle table mm 3500x1500x H300 - Chain chip conveyor USED MACHINE

Year of construction: 1980, Condition: used, Bed Milling machine Bed Miller Model: CNC positioning and conventional Manufacturer: FIAS Berico Type: AF CNC: Siemens OP7 positioning Travel X-Y-Z: 1530x750x750mm Table-dimensions: 1820x650mm Crjlsv Umcijn Hkq Aob Spindle-speed: 30-2000rpm Spindle-take: ISO50 Including cabinet full with tooling and peripherals Machine-dimensions: 3200x2425x2450 (motor dismantled for transport) Machine-weight: 7500kg Video available from full functionality, just before disconnecting. - Year: 1980 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 400 x 400 [mm] - Tool type : ISO40 - Spindle speeds : 31.5 - 3500 [rpm] - Spindle power : 6.5 [kW] WEIGHT & DIMENSIONS Crjlnevxw Auj Hkq Aeb - Machine floor space : 2900 x 2650 [mm] - Machine height : 2000 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Heidenhain TNC 155 - Milling vice

Year of construction: 2008, Condition: used, Price: On request CNC milling machine machining center Model: 3-axes Manufacturer: Narvik / Pinnacle Type: CNC - PK SV65 VMC / SV65 Controller: FANUC Year: 2008/09 Colnjv Ul Uqe Hkq Asrb Used for teaching in a school. In very good condition, very little and not intesive used. Work-table: 800x510mm Travel: 650x560x560mm Travel-speed: 10.000mm/min Positioning: 0,001mm Max. workpiece-weight: 600kg Spindle-speed: 8.000 rpm Spindle-take: BT40 Spindle-power: 5,5kW Toolholders: 20st Incl. toolholders en documents Machine-weight: 4500kg Machine-dimensions: 2600x2200x2650mm - Year: 2008 - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 2000, Condition: used, Price: On request Working width 830 mm Working height 500 mm Power (kW) 5 kW Working depth 600 mm Mounting SK-40 Number of axes 3 Celnsv Ul Taj Hkq Ajrb Metal milling machine Model: Conventional Manufacturer: KLOPP Type: UFB Travel: 830x600x500mm Table dimensions: 1000x560mm Milling head rotatable Intake: SK-40 Spindle motor: 5.5kW Spindle speed: 31.5-1400rpm Machine weight: 3000kg - Year: 2000 - Documentation available: No - Serial number: 50 EVO Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Year of construction: 1990, Condition: used, Empty weight: 3.500 kg Dimensions (LxBxH): 270 x 190 x 260 cm - Year: 1990 - Documentation available: No - Serial number: K30741 - Control: CNC - Transport dimensions: 2700mm x 1900mm x 2600mm (l x w x h) - Transport weight [kg]: 3500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren Cjln Hjv Ul S Nekq Asrb

Year of construction: 1997, Condition: used, Price: On request - Year: 1997 - Documentation available: No - Control: CNC - Motor power: 22.0kW Celn Hkov Ul S Aoq Ajrb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren