Used Sfc for sale (26)

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Isdpfxjt A Uyuo Ahveap Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KAESER BSD72SFC screw compressor, machine with frequency inverter, after service Technical specifications: Capacity: 6.76 m3/min (6760 l/min); Motor power: 37 kW; Pressure: 8.5 bar Year: 2008 Net price: 26,700 Gross price: 32,841 Iasdpjyt H Rnefx Ahvsp The compressor is fully operational. Service provided. Below is a link to a video.

Condition: excellent (used), Year of construction: 2008, KAESER ASD47 TSFC screw compressor, machine with inverter and air dryer, after servicing Technical specifications: Capacity: 5.27 m3/min (5270 l/min); Motor power: 25 kW; Pressure: 8.5 bar Year: 2008 Net price: 22,500 Gross price: 27,675 The compressor is fully functional, Isdpfx Ahoyt H Nwjveap service support provided. Below you will find a link to a video showing the machine in operation.

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, overall weight: 3,436 kg, total length: 12,192 mm, total width: 2,438 mm, total height: 2,896 mm, motor manufacturer: Kaesar, volume flow: 1,538.4 m³/h, pressure (max.): 8.5 bar, type of cooling: air, input voltage: 400 V, compressed air connection: 6.5 bar, pressure: 8.5 bar, type of input current: three-phase, Equipment: compressor, Hello, we are selling our compressor container solution. As we no longer had space in the hall, we opted for a containerized solution. The compressor was intended for a clean room with positive pressure, hence the high flow rate. Two Kaeser screw compressors are installed to provide maximum redundancy. Original price €220,000. Unfortunately, the unit was never put into operation, it was only switched on once a month. I am happy to send you the technical documentation. Iaodpfxoym Nrus Ahvjp

Condition: excellent (used), Year of construction: 2011, operating hours: 70,792 h, Rated power: 160.0 kW Motor speed: 1500 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C Iedpsyhpppjfx Ahvjap

Year of construction: 2002, condition: ready for operation (used), Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible. Iaodpoxph Nvofx Ahvjp

Condition: excellent (used), operating hours: 26,271 h, overall weight: 850 kg, volume flow: 231 m³/h, pressure (max.): 13 bar, Equipment: type plate available, PRODUCT - KAESER TYPE - ASD50 SFC S/N - 2541 YEAR - 2019 POWER (kW) - 25 OUTPUT. (m3/min) - 0.93-3.85 CIS (bar) - 13 HR (DOC/GENERAL) - 26271 / 28531 Iedevkca Nspfx Ahvoap

Condition: excellent (used), winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm Ijdpovxfl Rjfx Ahvoap -Rope type: 6x36WS-SFC with 1x loop see photos -Length: 44 m -Number: 4x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 800 x 570 mm -Weight: 110 kg/piece

Condition: excellent (used), Year of construction: 2013, overall weight: 755 kg, volume flow: 316.2 m³/h, PROD. KAESER TYPE - ASD47 SFC S/N - 3068 YEAR - 2013 POWER (kW) - 25 Isdpfera Akzsx Ahvoap OUTPUT. (m3/min) - 1.07-5.27 CIS (bar) 8.5 WAVE - yes BUILT. DRYER - no EXCHANGER - yes

Condition: as good as new (ex-display), Year of construction: 2025, Exhibit available immediately: New variable Kaeser SK 25 SFC - 10 bar screw compressor Pressure: 10 bar Nominal power: 15 kW Delivery rate: 0.84 to 2.25 m³ / min Sound level: 68 dB (A) Iodpok Adcaofx Ahvjap Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Weight: 337 kg Operating hours: 1.5 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: like new (used), Year of construction: 2011, operating hours: 10,000 h, overall weight: 5,500 kg, For sale Oil-free compressor in perfect condition. 200 kW Iajdpfxev Iymuo Ahvop 10 Bar Water-cooled

Condition: excellent (used), Year of construction: 2020, operating hours: 25,023 h, functionality: fully functional, Screw compressor Kaeser DSD240SFC 132 kW 8.5 bar Iasdpjyr E Snjfx Ahvep 23.47 m3/min. Integrated frequency inverter.

Condition: excellent (used), Year of construction: 2014, operating hours: 77,600 h, functionality: fully functional, Screw compressor Kaeser DSD202SFC 110 kW Iodpfjyr Dbnex Ahvoap 10 bar 20.30 m3/min Integrated frequency inverter. Stage replaced once. New oil filter and oil.

Condition: new, functionality: fully functional, power: 1.1 kW (1.50 HP), overall weight: 1,810 kg, Year of construction: 2026, total length: 2,200 mm, total width: 3,450 mm, total height: 2,380 mm, input voltage: 400 V, conveyor belt length: 3,000 mm, conveyor belt width: 400 mm, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO® VS MEDI vibration screen with conveyor belt optimizes material processing for recycling, construction, agriculture, and gardening industries. It efficiently screens and transports materials, saving time and increasing overall throughput. Key Features: • Dual vibration motors for high-performance screening • Integrated conveyor belt for continuous material transport • Optional bars for improved coarse-to-fine separation • Hopper for efficient material supply • Adjustable support feet for quick setup on uneven terrain Tech Highlights: Iajdpfx Asw U Rzashvjp W 3,45 m · L 2,2 m · H 2,38 m · Max bucket width 2,3 m · Screen area 2,7 m² · Qmax 55 t/h · Drive 2 x 0,55 kW · n 2 x 1400 rpm · Loading height 1,96 m · Weight 1810 kg · Conveyor belt width 0,4 m · Conveyor belt length 3 m · Conveyor belt drive power 400 V / 1,1 kW

Condition: excellent (used), Year of construction: 2008, operating hours: 126,772 h, functionality: fully functional, Kaeser DSDX243SFC screw compressor, 132 kW with 8.5 bar and 26.90 m³/min. Integrated frequency converter. New compressor stage installed at around 45,000 operating hours. Isdpfx Aoyhakkohvoap

Condition: used, Year of construction: 2005, operating hours: 52,029 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 375 m³/h, pressure (min.): 6 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, USED KAESER SCREW COMPRESSOR BSD72SFC + REFRIGERATION AIR DRYER TD61 Installation consists of: - 1 x Kaeser frequency-controlled screw compressor BSD72SFC Capacity: 6.25 m³/min Pressure: max. 8.5 bar Motor power: 37 kW Iasdpfxsykriqe Ahvsp Total hours: 52,029 / load hours: 38,411 - 1 x Kaeser refrigeration air dryer TD61 Capacity: 7.0 m³/min Motor power: 1.1 kW - 1 x cyclone separator ZK04 with automatic condensate drain Capacity: 7.0 m³/min - 1 x fine filter FF-71 Capacity: 7.1 m³/min

Condition: good (used), 6x Gogas dark radiators DSF-C, - used - : Price per unit ex location: €1,500 (net) dismantled, packed and loaded! Manufacturer: GoGas Type: dark radiator DSF-C Year of manufacture: 2019 Iajdpfx Ahju T E Rdovep Cat: I3P Gas type: G 31 (propane/butane) (according to the manufacturer, can be easily converted to natural gas, for example, by changing the nozzles for around €15), Qn (Hi): 20/14 kW U: 230V 50 Hz P: 75 VA Nozzle: 2.25mm Air aperture: 72mm Nozzle pressure: 38.0 - 19.3 mbar KI.Nox: 3 Prod.ID no. e.g. CE 085 BL 0499 Factory number: e.g.: 242585 Condition: good Available: from approx. mid-December 2024 Location: Simmern (Hunsrück)

Condition: ready for operation (used), Siemens SITRANS F C MASSFLOW MASS 2100 FDK: 083L2551 flow meter, SN:200271N284, used, normal signs of use, 100% functional, delivery as shown in photos. Isdpfxsxahuts Ahvjap

Condition: ready for operation (used), Siemens SITRANS F C MASSFLOW MASS 2100 FDK: 083L2551 flow meter, SN:287171N094, used, normal signs of use, 100% functional, delivery as per photos. Iajdpfx Ahexahuyevjp

Condition: excellent (used), Year of construction: 2016, operating hours: 42,281 h, functionality: fully functional, Screw compressor Kaeser DSD240SFC, 132 kW, 8.5 bar with 23.47 m³/min. Integrated frequency converter. Isdex Hwa Iopfx Ahvoap

Condition: good (used), Year of construction: 2002, machine/vehicle number: 1001, overall weight: 1,300 kg, volume flow: 450 m³/h, pressure (max.): 8.5 bar, Equipment: type plate available, We offer: KAESER BSD72 SFC Technical data: S/N: 1001 Iaodpfx Asv E Hg Nohvep YEAR: 2002 CAPACITY (kW): 37 OUTPUT (m3/min): 1.54-7.50 CIS (bar) :8.5 INVERTER: yes COOLED (AIR/WATER): air S014314

Condition: good (used), MANUFACTURER: KAESER MODEL: ASD37 SFC SERIAL NO.: 1349 YEAR: 2011 POWER (kW): 22 CAPACITY (m3/min): 1.05-4.64 PRESSURE (bar): 8.5 OPERATING HOURS (DOC/TOTAL): 81,935/81,976 FREQUENCY INVERTER: yes BUILT-IN DRYER: no HEAT EXCHANGER: yes COOLING (AIR/WATER): air, water ON RECEIVER: no DOCUMENTS: no CONNECTION: 1 1/4'' NEW/USED: USED Iaodpfoxyh U Tox Ahvjp

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn Iodpfx Ajyc Ig Ajhvsap • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Year of construction: 2020, condition: ready for operation (used), This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information. Additional equipment • ELBARON grinding mist extraction system / Robot pallets / Collets for all common diameters up to 20 mm / Spare spindle / Sanding wheel packs and associated sanding wheels (Approx. 25 pieces) Machine Benefits Technical Machine Benefits • Operating time: 42000 minutes • Machine in mint condition / original spare spindle available, eliminating waiting times for spindle maintenance / full description and installation manual included Extra Information Spindle bearing: Front/rear: 7010 CTYN DU L P4 (NACHI)/ Lubricating grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing)/ Tightening torque: 58 Nm (front/rear)/ Concentricity: ≤ 0.002 mm/ Motor: LENZE 7.5 kW (10 hp), 4-pole/ Speed: 0-4500 rpm (frequency converter)/ Belt: PJ-12-1143L (GATES/FENNER)/ 2 Feed drive unit - X- and Z-axis/ Stroke: X-axis: 300 mm/ Z-axis: 680 mm/ Ball screw: Type: Fixed - Supported/ Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque)/ Ball screw spindle: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm)/ Motor: BECKHOFF AM8053-0G20 (11.4 Nm)/ Clutch: SFC 050 DA2-24B-20B (MIKI PULLEY)/ 3 Feed drive unit - Y-axis Stroke: 300 mm/ Ball screw: Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm)/ Ball nut specification: BIF 3210-5 (THK)/ Motor: BECKHOFF AM8061-0GB1 (12.8 Nm)/ Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY)/ / Rotatable table - axis A/ Bearing: 7014 CTYN DUL P4 (NACHI)/ Tightening torque: 255 Nm (front), 62 Nm (rear)/ Radial runout: ≤ 0.002 mm/ Grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing)/ Iasdpfx Ahsx D Hi Rsvop 5th Rotary Table Assembly - C Axis/ Bearing: YRT 100 (GOLDBULL)/ Assembly torque: 14 Nm (3-stage: 40% → 70% → 100%)/ Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm/ Encoder: RENISHAW/ main coolant system/ Flow rate: 85 L/min/ Tank volume: 400 liters/ Pump: RKM206 (Rajamane, 1.5 kW, 6-stage)/ Filtration: Paper filter Para mol N 334/150 (0.01 mm)/ lubrication layout/ Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC)/ Metering Cartridge: 320410-3 (LUBE)/ steady rest (manual)/ Vertical stroke: 3 mm/ Diameter range: Ø3-Ø22 mm/ Carriage travel: 120 mm

Condition: good (used), Year of construction: 2014, only approx. 150 million impressions Iodpfjx Sdn Aex Ahvjap Equipped with: CX Package Logistics – with manual non-stop feeder FAPC (Fully Automatic Plate Change) Preset Ergotronic control console WallScreen display Colortronic ink metering Varidamp Lateral, circumferential, diagonal register control Technotrans Beta c 220L (air-cooled) Ink temperature control CleanTronic Synchro – roller / blanket / impression cylinder wash DriveTronic feeder SIS (Sensoric Infeed System) Non-stop feeder – manual, not fully automatic Non-stop delivery with roll-on device Raised on a plinth (420mm) Ink agitators (UV) EES (Energy Efficient System) CleanTronic simultaneous blanket & impression cylinder wash CleanTronic UV – dedicated position for UV wash inside cabinet UV interdeck – 6 x UV cassettes, installable at any position UV interdeck – positions available at all 6 print units, drying towers, and 3 positions in the delivery Coating unit 1: Harris & Bruno aqueous and UV coating pumps with prep tanks (heated) Drying tower 1: VariDry IR/Hot Air dryer (plus interdeck position) Drying tower 2: VariDry IR/Hot Air dryer (plus interdeck position) Coating unit 2: Harris & Bruno aqueous and UV coating pumps with prep tanks (heated) DriveTronic SFC (Simultaneous Form Change) at coating units KBA VariDry IR/Hot Air/UV at end of press ALV3 extended delivery