Condition: used, Year of construction: 2001, x-travel 600 mm Hnedpox Szq Isfx Aanor y-travel 450 mm z-travel 400 mm Control FIDIA C1*/F tool magazin: 20 tool taper HSK 63 table load 0,7 t positioning accuracy 0.010 mm total power requirement / kW weight of the machine ca. 4,2 t Including automatic tool changer. Chain magazine with collets for 20 tool holders.

Condition: used, x-travel 760 mm y-travel 410 mm Hnsdpfsxxb I Djx Aanjr z-travel 500 mm

Condition: used, Year of construction: 1996, x-travel 3000 mm y-travel 1500 mm z-travel 400 mm Serial number 7872 chip conveyor MAYFRAN 40.6GS-HR/SP20 control SIEMENS SINUMERIK 820 table surface area 3000 X 1500 mm table load 1000 kg / m2 Tool changer 52 stck. weight of the machine ca. 15000 kg UNISIGN - Uniport 4 - Machining centre - Vertical Technical details will be added shortly 40820 operating hours including chip conveyor from the manufacturer MAYFRAN with TYPE 40.6GS-HR/SP20 Total weight: 15,000 kg Hodsud Ixlepfx Aanonr

Condition: used, Year of construction: 2004, x-travel 1300 mm y-travel 510 mm Hodpfxsyyc Svj Aanenr z-travel 570 mm max. workpiece weight 1200 kg spindle turning speed range 12000 U/min weight of the machine ca. 7,1 t required space 5,00 x 3,20 x 3,00 m

Condition: used, Year of construction: 2000, x-travel 1000 mm y-travel 1040 mm z-travel 750 mm control Heidenhain TNC 426 turning speeds 15000 U/min total power requirement 40 kW weight of the machine ca. 10,1 t required space / m Hjdpfx Aaetig D Ionenr

Condition: used, Year of construction: 2008, x-travel 1350 mm y-travel 900 mm z-travel 750 mm spindle turning speed range 15000 U/min Control iTNC 530 weight of the machine ca. 11,4 t 3-axis vertical machining centre with BÜRENER KFE 63/40-900 Z60 chip conveyor Condition: Well suited for roughing operations Working ranges X-axis travel: 1350 mm Y-axis travel: 900 mm Z-travel: 750 mm Spindle nose to table surface: 135–885 mm Work table Clamping surface: 1425 x 860 mm Max. workpiece weight: 1800 kg Number of T-slots: 10 T-slot width: 1x18H7.9x18H12 Work spindle Hnodeyyqtujpfx Aanjr Speed range: 0 - 15,000 rpm Power: 38 kW Tool magazine: 46 pcs. Tool holder: HSK-A63 Cooling: Water with corrosion protection Footprint L x W x H: 4130 x 3680 x 3150 mm

Condition: used, Year of construction: 2001, x-travel 2050 mm Hnjdorw Dknjpfx Aanjr y-travel 1100 mm z-travel 800 mm Control Fanuc 18iM Super Cap II turning speeds 60-6000 U/min tool magazin: 60 tool taper BT50 total power requirement 26 kW weight of the machine ca. 23,6 t required space 6,3 x 3,3 x 3,8 m

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min Hodpfoy Skmrex Aanjnr • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530

Condition: ready for operation (used), Year of construction: 2003, operating hours: 6,276 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 63 V was manufactured in 2003. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a Siemens 840D control unit and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 63 V vertical machining centre we have for sale. Contact us for further details. - Total Power On: 24,787 h- Spindle / Cutting Time: 6,276 h- Apparent Power: 30 kVA- Max Current (Jn max): 50 A- Rated Current: 45 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50/60 Hz Technical Specification Taper Size SK 40 Hnedozt N Saopfx Aanor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: SIEMENS, controller model: 840D SL, total height: 2,515 mm, total width: 1,700 mm, table width: 410 mm, table length: 770 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of slots in tool magazine: 24, product length (max.): 2,390 mm, number of axes: 3, This 3-axis SPINNER VC450 was manufactured in 2014. It features an X-axis travel of 450 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 770 x 410 mm and a maximum table load of 200 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER VC450 vertical machining center we have for sale. Contact us for further details. • Control Unit Brand: Siemens • Control Unit Model: Siemens 840D SL • Spindle Power: 16 kW • Maximum Torque: 60 Nm • Rapid Traverse: 36 m/min • Tool Magazine Capacity: 24 Positions • Maximum Tool Diameter: 80 mm • Maximum Tool Length: 200 mm • High-Pressure Through-Spindle Coolant (CTS) • External Coolant Tank • Fully Enclosed Working Area Hjdpszt Nvlsfx Aanenr • T-Slot Worktable • 3-Color Signal Tower • Machine Status: Tested and Fully Functional • Main Spindle Replaced by SPINNER in February 2026 • Operating Hours Since Spindle Replacement: approx. 30 h Additional Equipment • Chip Conveyor • Machine Vises (optional) • SK40 Tool Holders (optional) • Additional Tooling and Accessories (optional) Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2006, CNC machining center DMC 635V Year of manufacture 2006 Hnsdpfx Aew Tir Ueaner Heidenhain TNC 530i control Control approx. 58,400 hours Program run approx. 19,980 hours According to the sticker in the control cabinet, the spindle and motor were replaced in January 2019 at 10,660 hours. No documentation available. Machine runs smoothly Travel distances X 635 Y 510 Z 460 Tool holder SK 40 20-position tool changer Table 790×560 with chip conveyor Weight approx. 3700 kg This offer is directed exclusively at commercial enterprises within the meaning of §14 BGB (German Civil Code). No sale to private individuals.

Condition: good (used), Year of construction: 2004, Vertical machining center, Mazak VCN-510C, manufactured in 2004. Hjdpezcu D Uofx Aanonr

Condition: used, Vertical machining center, Haas MiniMill, year 2005... Hnedpfx Aasy Idpxonjr

Condition: good (used), Year of construction: 2020, Hartford vertical machining center, model MVP-11, year 2020, with Hartrol Premium I control. Hnodpfx Aaszq A Hfjnsr

Condition: good (used), Year of construction: 2006, Haas VF-5B/40HE vertical machining center, year 2006. Hnsdpfszcu Imjx Aanor

Condition: ready for operation (used), Mori Seiki MV-Junior vertical machining center... Tool magazine for 30 tools, travel X: 560 mm; Y: 410 mm; Z: 460 mm, table size: 900x450 mm, maximum table load: 300 kg, maximum spindle speed: 8,000 rpm, total weight: 3,900 kg Hjdpfx Aex I D Syoanonr

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Hsdpfjvt Dwbex Aanjnr Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. Hjdpfoyzhbfex Aansnr -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: used, Year of construction: 2000, functionality: fully functional, Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of manufacture: 2000 Condition: used, under power, control on Windows 7 NEW x-path 600 mm y-path 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm 18-position tool changer Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röders Jobmanager (for processing several workpieces in succession) Probing programs for almost all common geometries Extor extraction system for dusty machining Minimum lubrication Bed path blower Blum measuring laser (for tool measurement length + diameter + contour and breakage control) Hnjdpfxoztw Nmj Aansr Tool cleaning (air) Cooling unit for spindle and switch cabinets documentation

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating hours: 15,950 h, POSmill E 1100 machining center ITNC 530 (2014) Manufacturer: POSmill Type: E 1100 machining center ITNC 530 Year of manufacture: 2014 Condition: used, good under power ready for demonstration, X-spindle NEW Switch-on hours approx. 43,559h Spindle hours approx. 15.789h Control ITNC 530 Travels POsmill E 1100 X-axis 1100 mm Y-axis 600 mm Z-axis 510 mm Rapid traverse up to 32 m/min Ball screw drives up to 50 mm Feed rate 1 - 10,000 mm/min. Tool holder ISO 40 Speed, max. 10,000 rpm Power, max. 25 kW Spindle/table distance 120-630 mm Table dimensions 1300 x 600 mm Distance floor/table approx. 855 mm Load, max. 1,000 kg Distance spindle/stand approx. 600 mm Number of tools 60 pcs. Hnodpjztwyrjfx Aansr Tool length, max. 300 mm Tool weight, max. 8 kg Changing time from 5.5 s Weight 8,500 kg - Original documentation - 3D measuring probe - Belt filter system with IKZ 20 bar - Water gun - Air gun - Machine feet - Chip conveyor - HR 410 handwheel - Prepared for 4th & 5th axis Note: Without vices

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, Posmill C1050 3-Axis Machining Center (2010) Manufacturer: POSmill Model: C1050 3-Axis Machining Center (2010) Year of manufacture: 2010 Machine type: 3-axis machining center Condition: Powered on, ready for immediate use Operating hours: approx. 29,800 h Spindle hours: approx. 9,000 h CNC Control: iTNC 530 Spindle speed: 10,000 rpm Tool magazine: 30 slots X-axis (mm): 1,050 Y-axis (mm): 530 Z-axis (mm): 630 Distance spindle/table (mm): 85-715 Accessories: Documentation Hnodpfx Aajztwyljnor Chip conveyor Coolant system 30-position tool changer Linear scales on all axes X / Y / Z 3D probe Electronic handwheel Available immediately.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, MTCut V110 4-Axis Machining Center (2012) Manufacturer: MTCut Model: V110 Year of manufacture: 2012 Condition: used, very good, in production. Hnjdpfx Aaeztwwqsnjr Power-on hours: 14,150h Spindle hours: 3,710h Control: Itnc 530 Travel range X x Y x Z = 1100 x 640 x 610mm – 30-position tool changer ISO 40 – 4th axis, 200mm chuck with hydraulic workpiece clamping and 350mm faceplate. – Internal coolant supply 50 bar – Spindle cooling – Probe – Dimensions approx. L x W x H 3.2 x 3.2 x 3.1m (Transport height 2.5m).

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun Hedpfx Aeyzgp Ueanjnr -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type Hnedsy Dr A Eepfx Aanjr -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: i Series, total height: 2,950 mm, total length: 2,450 mm, total width: 3,150 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,104 h, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine features a large working area and a robust construction, making it suitable for both single-piece and series production work. Hjdpjztvmwsfx Aanenr In addition, this machine is equipped with various interesting options, as listed below, and comes with a comprehensive set of tools. The machine is currently installed and operational at our facility and can be inspected by appointment. Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - Renishaw OMP 3D probe - 2 machine vices - Chip conveyor - Spindle cooler - Preparation for a 4th axis - Approximately 30 SK40 tool holders - All original documentation