Machining Center - Vertical

MAZAK NEXUS VCN-510C

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Redsyh N Aajpfx Apdjch Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank Rsdpfx Ajxx A Ewopdech with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 1,476 h, functionality: fully functional, machine/vehicle number: 174275, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, Due to spindle replacement – machine has only 1,476 spindle hours TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Spindle speed: 12,000 rpm Number of tool changer positions: 30 Table size: 1,700 x 750 mm MACHINE DETAILS Spindle motor power: 18.5 kW Control: Mazatrol 640M Rcjdpfjy Am Ndex Apdjh Weight: 7,100 kg Operating hours Counter 1: 43,723 h Counter 2: 1,476 h EQUIPMENT Chip conveyor

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Redpfjh Tnpxox Apdech

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat Rjdpoy Ty Ihefx Apdoch tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-2SS | 4th axis | Through-spindle coolant | 2014 Vertical CNC Machining Center HAAS VF-2SS, manufactured in 2014. Machine equipped with a 4th axis and through-spindle coolant (TSC). Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Max. table load: approx. 680 kg Spindle speed: 12,000 rpm Spindle taper: CT/BT 40* Spindle drive: direct drive Tool changer: 24+1 positions* Rapid traverse X/Y/Z: up to 35.6 m/min CNC control: HAAS Through-spindle coolant (TSC) 4th axis included Tool holders: not included Year of manufacture: 2014 Operating hours: not available Previous operation: 2–3 shifts Rcodpfx Apjz Dh Edsdoh Equipment: 4th axis Through-spindle coolant High-speed Super Speed (SS) version Automatic tool changer Coolant system Machine inspection can be arranged by prior agreement.

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Rsdpjxlngasfx Apdjch Feel free to contact us if you have any further questions.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Rsdsw T Tlrjpfx Apdech Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. Rcedpfx Aeu Iddnspdoh delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Redpfoyldxmox Apdoch Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Side shifter, fork positioner, Full cab, twin tires,