Cut-to-length line and slitting line

Chiny 0.5-3 mm 1.5 -3 m

Condition: excellent (used), Year of construction: 2005, pipe Ø 25 – 60 mm wall thickness 1 - 4 mm coil Ø max. 3.000 mm coil weight max. 10 t finish pipe length 3.600 - 8.500 mm round pipe Ø 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm Pjdpfeuc Shusx Adnjrd speed max. 100 m/min working direction left → right The line consists of: decoiler crop shear welding table edge trimmer with scrap cutter scrap conveyor strip edge preparation entry table forming part internal scraper/outer scraper cooling zone calibrating part testing and length measuring cutting ejector for reject pipes blow-off station oiling station bundle station banding station bundle extraction electrics

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Pjdpfx Asixqg Njdnjrd Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with Prsdpefg E Hpsfx Adnjd lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 1996, condition: excellent (used), Steam Boiler Used Manufacturer: LOOS Year of manufacture: 1996 Steam capacity: 500 kg/h Weishaupt gas burner G3/1-E Type: ZD-NA Power: 80-550Kw Year: 1996 Weishaupt burner is available in several variants Prodpoiz S Suefx Adned Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Prsdpfx Aetiy Ntednjd Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual fuel burner gas+heavy oil Output: 2600Kw Year: 2008 Viewing by telephone only! Prjdpfxemnqbwe Adnod Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: used, Year of construction: 2007, Bending length 3050 mm Max. prebending capacity 13 mm Max. rolling capacity 16 mm Top roll dia. 340 mm Lower roll dia. 340 mm Side rolls dia. 240 mm 4-rolls Fully hydraulic Hydraulic drop end Digital read out of roll positions Equipped with: Top support Prsdpfxsxhgqie Adned Side support

Condition: ready for operation (used), DESCRIPTION CHARACTERISTICS MATERIAL Coils Cold , Galvanize THICKNESS 0,4-2,5 mm WIDTH COIL 500-1550 mm MAX WEIGHT OF COIL PROCESSING 16tn INTERNAL DIAMETER COIL 480-520mm, 580-620mm,740-800mm EXTERNAL DIAMETER COIL 1600mm INTERNAL STRIPE DIAMETER 508mm Pedpfx Ajvupmdodnjrd TOLERANCE OF STRIPE 0,1mm MIN STRIPE WIDTH 20mm MAX STRIPE WIDTH 1520mm Number of Tearing / Width 0,4-1 mm 20 stripes 1,01-2 mm 10 stripes 2,01-2,5mm 8 stripes Minimun Trimming 8mm (2X4mm)

Condition: good (used), Technical specifications: Working length: 3050 mm Max. bending capacity: 30.0 mm Pre-bending: 25.0 mm Number of driven rollers: 3 Top roller diameter: 410 mm Bottom roller diameter: 380 mm Hydraulic folding bearing Extended rollers for profile bending Control panel with digital display Motor power: 40 kW Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 22 tons Accessories: Pjdpfx Aswchplednjrd Side hydraulic bending aids

Condition: excellent (used), Loos U-HD 2000kg/h 16Bar Pedpfx Aju I Rxlodnerd