Pinch roll unit

COMEC

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, spindle diameter: 40 mm, Comec FGS-1T CAB Carousel Milling Machine Number of spindles: 1 Milling spindle motor power: 5.5 kW Spindle speed: 7050 rpm Tool diameter min/max: 120-200 mm Hedez R Rn Dopfx Aitenu Spindle diameter: 40 mm Maximum milling height: 115 mm Workpiece diameter min/max: 110-800 mm Table rotation motor power: 1.5 kW Table rotation speed: 1.65–8.8 rpm Machine dimensions: 1600×1700×2600 mm Machine weight: 1500 kg

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 Hnedpfozi Ra Rox Aitsu MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2006, condition: excellent (used), 2 movable spindles Hjdpfx Aijhh S Dxetonu Pneumatic pressure Motors on the inverter

Condition: used, Year of construction: 2002, turning diameter 340 mm turning length 600 mm turning diameter over slide 300 mm Hnodpfexvdraex Aiteu control Siemens 840 D spindle passage 55 mm spindle nose ASA 6 number of spindle speeds 4000 U/min spindle motor 27 kW Number of tools 12 VDI 40 driven stations 12 VDI 40 rapid traverse 30 m/min power sub spindle 15 kw CNC- lathe with driven tools an subspindle Driven toolstation cannot be used due to cable breakage - chip conveyor - sub spindle - driven tool stations (not working) - tool measuring

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Hnodjyl Uh Sjpfx Aitou Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump Hedpoz Ic Nfofx Aitenu - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Condition: used, Comec 3-Spindle Vertical Drill Hodpfxsy S Adij Aitonu Maximum piece length cm. 100

Condition: used, Modular milling cutter Module 8 20 degrees Length 1800 mm Diameter 120 mm Inner diameter 40 mm Hedpfx Aedklt Neitenu

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: COMEC Model: MD TOP L CA2 Type: Milling and mortise cutting machine Year of manufacture: 2024 Used, with signs of wear, good condition For sale from the location 07570 Weida Technical data according to the manufacturer: Axes: 3 X-axis: 2,500 mm Y-axis: 250 mm Z-axis: 180 mm Horizontal machining unit Electric spindle for milling with a 3.3 kW motor Milling spindle: 12,000-18,000 RPM, adjustable Tool holder: ER32 Drilling unit with a 1.7 kW motor With 16 individually selectable horizontal spindles, pitch 32 mm Drill chuck with a diameter of 10 mm Drill: 4,350 RPM Vertical machining unit Electric spindle for milling/drilling/routing with an 8.0 kW motor Tool rotation speed 12,000-18,000 RPM, adjustable With C-axis, interpolating 360 degrees Unit for saw blade with 2 outputs, 180° for drilling or milling tools Unit shank, tapered ISO30 Tools, collet chuck ER32 Vertical electric spindle for drilling with a 1.7 kW motor, 4,350 RPM 1 drilling head with individually selectable spindles, including: 3 vertical drilling spindles in a row, pitch 32 mm 7+7 front/rear, horizontal drilling spindles in a row, pitch 32 mm 2+2 left/right, horizontal drilling spindles in a row, pitch 32 mm Drill chuck, diameter 10 mm with lateral locking pin Clamping system 6 clamping brackets Adjustable on guide rail With 6 clamping cylinders and 6 lateral alignment cylinders with reference stroke Automatic adjustment of the supports via NC control The clamping brackets are fixed or released via program Extra workpiece width Hsdez Izm Nspfx Aitenu Specially designed clamping elements for a workpiece width of 100 mm Workpiece dimensions to be machined Max. cross-section of the workpieces to be machined Length: 2,250 mm Width: 100 mm Thickness: 30 mm Automatic loading system, model CA2 Adjustable on linear guides with a fixed left side and an adjustable right side Vertical parts magazine with automatic loading system and easy access for the operator Workpiece unloading system on 10 slide rails We will gladly send you further technical data and information upon request if you are interested in purchasing. The machining center is currently powered and can be inspected by appointment. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: new, Year of construction: 2026, functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Max. cylinder head width: 500/19,7 mm/inch Hjdpevmpnljfx Aitjnu Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm

Condition: good (used), overall weight: 13,000 kg, total width: 2,200 mm, total length: 8,000 mm, total height: 3,300 mm, Flanging and dishing machine BOLDRINI - RIBO 20HY/4000 BOLDRINI RIBO 20HY/4000 Hydraulic Flanging & Dishing Machine. Capacity up to Ø 4,000 mm. Suitable for manufacturing dished ends, pressure vessel heads and tank bottoms. Length:8000mm Width:2200mm Height:3300mm Weight:13000kg Hedpjzil H Esfx Aitenu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual • Drilling feed: Pneumatic • Clamping: Pneumatic • Control: PLC with selectable work cycles • Modularity/customization: High • Cleaning and waste system: Integrated, efficient Hnedpszuhb Asfx Aiteu • Certification: CE Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Condition: used, Year of construction: 1995, functionality: fully functional, Comec FT-CD-CA-650 end-milling machine Number of milling heads per side: 1 Length of workpieces: approximately max/min 650-220mm Automatic material feeding from a feeder Operation based on templates Hnedpfx Aiez D H Eceteu

Year of construction: 2020, condition: new, The Sapphire is the optimal solution for the heavy industry, handling material thicknesses up to 200 mm. It enjoys great popularity in a variety of production facilities – often those operating in three shifts – as well as in all applications where stability, efficiency, and process reliability are particularly important. Thanks to its high-quality equipment, the system is a versatile tool for the highest demands and a helpful instrument for process optimization. Having been deployed in over 400 industrial facilities worldwide, the Sapphire cutting system proves its worth every day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm - Extraction system PFC 6 incl. extraction ducts - Delivery, assembly, and commissioning Hnjdpfxsf Ak N Rj Aitou Key features • High dynamics and precision in automated 2D & 3D cutting of sheets, tubes, and profiles • Sheet metal processing up to a material thickness of 200 mm • Extensive cutting data library for ideal user-friendliness • Designed for the highest demands under the most challenging conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2,000-7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Height of work table: 740-760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Condition: used, Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the stable milling unit ensure consistently precise profiles in both batch and single-piece production. Hnedpfoztvxgex Aiteu Technical data: - Working width: approx. 1,000 mm - Spindle diameter: 40 mm - Feed: Pneumatic