Cut-to-length and slitting line

Forstner nuSlit

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Ledjg U Utvspfx Ancsaa Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness steel (max.): 1 mm, number of blades: 5, working width: 1,250 mm, number of feed rollers: 2, FORSTNER MST 1250 Longitudinal Slitting and Sheet Cutting Machine The machine is in very good condition and fully operational. Designed for longitudinal slitting and cutting into sheets. Lasdsx R Sk Nepfx Ancja It is currently connected - can be tested on site. Longitudinal slitting into 6 strips (5 pairs of knives), with the option to mount up to 7 pairs. Control – Siemens SIMATIC touchscreen panel. Full documentation (PDF) included. Specifications: Model: FORSTNER MST 1250 Made in: Austria Year: 2010 Working width: 1250 mm Thickness: up to 1.0 mm Slitting knives: 5 pairs Shearing: circular shears Controller: Siemens SIMATIC panel If you have any further questions, we will be happy to answer.

Condition: used, functionality: fully functional, Year of construction: 2003, control type: CNC control, working width: 4,000 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 2,860 kg, input voltage: 400 V, input frequency: 50 Hz, We are offering this used Schechtl MAE-A 400 CNC folding machine, year of manufacture 2003. Manufacturer: Schechtl Model: MAE-A 307 CNC Lsdoyxphuepfx Ancjaa Year of manufacture: 2003 This is your opportunity to purchase a high-quality folding machine from the Schechtl brand. This powerful machine is ideal for anyone involved in sheet metal processing who values maximum precision and efficiency. Product details: - Model: Schechtl MAE 400/CNC - Year: 2003 - Condition: used - Technical specifications: - Bending length: 4,000 mm - Steel: 1.5 mm - Aluminium: 2.0 mm - Stainless: 1.0 mm - Operating hours: 30,499 h - Weight: 2,860 kg If you have any questions or require further information, please feel free to send us a message or give us a call. "The machine is being sold according to Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. Once the machine is made available at the designated location, the buyer assumes all costs and risks, including loading, transportation, and customs formalities."

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) Ljdpfx Asx Hyhbencsaa • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: excellent (used), functionality: fully functional, working width: 2,040 mm, bending angle (max.): 180 °, sheet thickness (max.): 2 mm, 6-way programmable control 2040 x 2 mm Lajdpsynwiqjfx Ancja

Condition: used, Year of construction: 2022, sheet thickness steel (max.): 1 mm, blade shaft diameter: 100 mm, number of blades: 5, working width: 1,250 mm, FORSTNER SLIT CUT Longitudinal Cutting and Sheet Shearing Line, Year 2022 The machine is in excellent condition and fully operational. It has undergone comprehensive maintenance, and the longitudinal slitting knives have been sharpened. The line is designed for longitudinal slitting and cutting sheets to size. The machine is connected and can be demonstrated. Longitudinal slitting into 6 strips (5 pairs of knives), with the possibility to install up to 7 pairs. Equipped with a modern S1 control system with touchscreen, allowing for easy programming of different lengths and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and performs a perpendicular, clean cut. Ljdpfjx R Tt Sjx Anceaa Integrated material-saving function: the machine stops, raises the cutting knives, and the sheet is automatically fed to the shears. Complete technical documentation included. Specification: Model: FORSTNER SLIT CUT 1250 Made in: Austria Year: 2022 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Shearing: rotary shears Controller: S1 If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2023, gebraucht 2023 9676 prompt, Zwischenverkauf v Deutschland 13700 € 1 1250 mm 1.25 mm 1,25 mm bei 1 Messerpaar; 0.37 kW 36 m/min 70 mm 1900 mm 1600 mm 1000 mm 350 kg demo machine / mint condition - fixprice 3 pairs of blades Length measuring by wheel Digital preselection of one position Brake motor Rubber feeding rolls Manual crosscutting equipment in front and behind blade shaft Ljdpfewiqrijx Ancjaa with 1 cutting slide which alternaingly can be used on front and backside User manual in GERMAN OPTIONS: Additional pair of blades Decoiler

Condition: good (used), I offer here a set from Schechtl Lodpfxeudbzms Ancoaa Folding bench KS with foot closer and guillotine shear HT 150 Both have a capacity of 1.5mm iron - aluminum significantly more Working length a little over 1.5m Plate shears with depth stop guillotine shears with high quality front support with blade (optional spare blade available)

Condition: good (used), Year of construction: 2015, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: TEK05/2015, type of input current: three-phase, sheet thickness steel (max.): 1 mm, sheet thickness (max.): 1 mm, total width: 840 mm, total length: 15,000 mm, total height: 153 mm, feed length X-axis: 46,000 mm, feed length Y-axis: 2,000 mm, input voltage: 380 V, working width: 2,000 mm, infeed width: 1,500 mm, control cabinet length: 1,500 mm, control cabinet height: 1,000 mm, control cabinet width: 800 mm, feed rate X-axis: 700 m/min, workpiece weight (max.): 163 kg, product height (max.): 1 mm, input current: 380 A, power: 150 kW (203.94 HP), coil weight: 10,000 kg, HIGH GROOVE SHEET PROFILING LINE (Corrugated Metal Sheet ribs 53/85/135/153 mm) Profile Type: H53 mm / H83 mm / H135 mm / H153 mm Sheet Metal Profile Thickness: 0.75 mm - 1.25 mm Minimum - Maximum Profile Length: 1500 mm - 15000 mm Manufacturer: TEK MAK Year of Construction: 2015 Laodpfx Ajuannxsncsa Condition: Very good condition for rolls for profiling 53, 85, 135, and good condition for rolls for profiling the 153 mm rib. Components of the Line: Hydraulic Uncoiler, 10-ton capacity Profile Forming Machine Mobile Guillotine Stacking Table Control and Command Panels

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, working width: 1,250 mm, warranty duration: 12 months, number of feed rollers: 1, Demonstration Machine Slit Cut 1250 mm Manufacturer: CIDAN Forstner Year of manufacture: 2025 Motorized feed Laedpfx Anjwy Hwpscja Longitudinal slitting with 5 pairs of knives with automatic infeed Crosscutting with rotary shear SPS1 control for automatic feed, longitudinal and crosscutting The Forstner SLIT longitudinal and crosscutting line is optimally suited for all sheet metal shops, drawing from years of experience. The system consists of a proven combination of traditional Forstner machines and can be combined with any manual or motorized decoiling unit. Key advantages: - The new design makes your SLIT line even better. - Now even more space-saving with the same strength. - LED slit knife illumination. - Table can be operated from both sides. - Simplest knife adjustment. Standard equipment: - Roller feeder hopper - Feeder table - 5 pairs of longitudinal knives - Crosscut rotary shear - SPS1 touch control - Speed: 25 m/min Cutting capacity in steel for longitudinal slitting: - With 3 pairs of knives: 1.5 mm - With 4 pairs of knives: 1.25 mm - With 5 pairs of knives: 1.0 mm