Used Cutting Head for sale (22,085)

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Gsdpfo Ahgrtex Agrsui Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! Godpfxs Ah Rl Us Agreui TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & Weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw ELECTRICAL DATA Operating voltage: 220–380 V DRIVE Speed: up to 2,800 rpm TOOL Grinding wheel diameter: 250 mm Gusds Aduyhopfx Agrsi MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 700 mm Width: 500 mm Height: 1,000 mm Weight: 150 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Guedpe Ahhi Ujfx Agrei Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Working area combined punching/laser: 3,000 × 1,500 mm Working area punching operation: 3,000 × 1,500 mm Working area laser operation: 3,000 × 1,500 mm Max. sheet thickness mild steel: max. 8 mm Max. sheet thickness stainless steel: max. 8 mm Max. sheet thickness aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching rate with E = 1 mm: max. 900/min Max. marking rate: max. approx. 2,800/min Max. number of multi-tools with 3 tool holders: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneous: max. 108 m/min EQUIPMENT SheetMaster ToolMaster GripMaster Working area without repositioning in large format Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet disposal on lifting table

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, operating hours: 27,693 h, laser power: 3,000 W, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,000 W Round tube diameter: min. 16 mm Round tube diameter: max. 225 mm Square tube dimensions: max. 160 × 160 mm Rectangular tube dimensions: max. 200 × 100 mm MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Gsdpfx Aj Air Hyjgreui Unloading length: 6,500 mm Operating hours: 27,693 h EQUIPMENT Automatic rear loading Automatic unloading system Fiber laser technology Specialized software solutions

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 20,000 h, laser source model: ROFIN DC 020, laser power: 2,000 W, working length: 6,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Processing length: min. 3,200 mm Processing length: max. 6,500 mm Round tube diameter: min. 12 mm Round tube diameter: max. 120 mm Square tube dimensions: min. 12 × 12 mm Square tube dimensions: max. 100 × 100 mm Rectangular and oval tube dimensions: min. 10 × 12 mm Guede Air Idjpfx Agrei Rectangular and oval tube dimensions: max. 120 × 70 mm Laser power: max. 2 kW MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Unloading length: 4,500 mm Load capacity of the bundle loader: 4,000 kg Number of digitally controlled axes: 6 Laser source: ROFIN DC 020 Operating hours: 20,000 h EQUIPMENT Automatic bundle loading system Unloading system ROFIN DC 020 laser source Cooling unit (chiller) Extraction system LT120 Optical weld seam tracking system LT120 Integrated micro-dosing system

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Berg und Schmid Model: PERFECT 275 Machine number: 55.025 ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz SAWING DATA Speed: 1,425 RPM Saw blade diameter: 275 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 900 mm Width: 600 mm Height: 1,600 mm Gujdj Adzkyopfx Agrei Weight: 200 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Minor Type: 3/67 Machine Type: Metal Circular Saw Gedpfx Agj Adzivereui Electrical Data Operating Voltage: 380 V Frequency: 50 Hz Saw Unit Saw Blade Diameter: approx. 200 mm MACHINE DETAILS Dimensions Length: 1,000 mm Width: 700 mm Height: 1,600 mm Weight Weight: 200 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Saw blade diameter: 400 mm MACHINE DETAILS Guedpfx Agj Aduxqerei Manufacturer: Trennjäger Type: ST351 Machine number: GK170 Machine type: Metal circular saw Length: 1,000 mm Width: 800 mm Height: 1,600 mm Weight: 200 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SAW UNIT Saw blade diameter: 300 mm Gujdpfj Adu Aiox Agrsi CONVEYOR Conveyor width: 490 mm MACHINE DETAILS MACHINE DIMENSIONS Length: 1,300 mm Width: 1,200 mm Height: 2,000 mm Weight: 400 kg EQUIPMENT Conveyor

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Gsdpfxox R U Epj Agrsui Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Technical specifications: - Power supply: 380–420 V / 50 Hz - Total power: 5.5 kW - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm - Minimum cutting length at 90°: 360 mm - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.

Year of construction: 2007, condition: good (used), useful lenght 5000mm Gedpfx Ago Afn Rijrsui blades 500 mm

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Godpsymax Eefx Agroui Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Guedpfxeymaypo Agroi Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7

Condition: used, Year of construction: 1998, functionality: not functional, machine/vehicle number: 241, travel distance X-axis: 4,000 mm, Tekna TK 145/20 CNC twin head mitre saw. Cutting lenght: 4000mm Godpfx Asxrg Suogrsui Blade 500mm

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Carbide blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Roller table for mobile head (3 m) Machine in working condition. Gsdpfxjyyliko Agreui

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: Gsdpfx Ajymaw Ujgroui - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Year of construction: 1993, condition: good (used), Underwater cutting head for BFM, used for the granulation of PE, PS, and PA. Gedpfx Ajipyh Ijgreui

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, CNC waterjet cutting machines PB-C 4020 COMBI X working area max.: 4000 mm Y working area max.: 2000 mm Control system: TCI CNC 4.0 Operating hours: 13,859 hours Laser beam on: 2938 hours Sheet metal thickness max.: 60 mm Workpiece weight max.: 3000 kg The waterjet cutting machines from TCI Cutting combine state-of-the-art European technology with individual further developments, based on many years of experience in the industry, both nationally and internationally. The PB-C COMBI combines the advantages of waterjet cutting technology with those of HD plasma cutting in a single machine. This offers our customers cutting precision, versatility, and speed, as well as the quality typical of HD plasma. In short: a complete solution that guarantees the highest surface quality for cuts of varying complexity, material thickness, and material type. The machine enables the cutting of workpieces with pure water or with water and abrasive, even with very hard and thick materials. As a result, it covers a broad spectrum of cutting processes, which can be adapted to the needs of the customer and the respective industry. In waterjet cutting, the workpieces are cut cold, which avoids changes in the chemical composition and deformations – especially in metals. - Plasma source Hypertherm XPR300 - Various nozzles for the cutting head - High-pressure pump KMT SLVI 50 STD Maximum pressure: 3800 bar Power: 37.5 kW - Water treatment system - Silo and dosing system for abrasive sand Guode Afm Hiopfx Agrji - Slurry flushing and filter system

Condition: used, Cutting head for Hegla Formline KT-19I Replacement cutting head, model cutting system. Little second-hand. SK. No.: 1611-10-138 Length: 225 mm. Width: 120 mm. Height: 320 mm. Godpfx Agev Rattsrjui Weight: 9260 g.

Condition: new, Year of construction: 2025, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys Guodpfx Agowh Rlgorji - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Condition: used, EMMEGI VEGA 450 single-head cutting saw, year 2001, equipped with an EMMEGI MICROBO TUV 4200 DX electronic positioning system. Guede Adrcmopfx Agrei Industrial machine designed for cutting profiles to length, equipped with a 450 mm circular saw blade, pneumatic material clamping system, and electronic positioning system with programming keypad and display. The MICROBO 4200 DX system allows controlled positioning of the measuring stop, facilitating repetitive cutting operations and ensuring consistent cutting accuracy. Technical Specifications – EMMEGI VEGA 450 Manufacturer: EMMEGI Model: VEGA 450 Year of manufacture: 2001 Saw blade diameter: 450 mm Saw blade bore diameter: 32 mm Saw blade motor power: 1.5 kW Rotational speed: 2,800 rpm Cutting speed: 66 m/s Operating pneumatic pressure: 6–7 bar Air consumption per cycle at 6 bar: 15 Nl Power supply: 400 V – 50 Hz Machine weight: 400 kg Electronic Positioning System Manufacturer: EMMEGI Model: MICROBO TUV 4200 DX Year of manufacture: 2001 Electronic positioning system for the measuring stop Control panel with keypad and display Longitudinal profile support table Adjustable stop and clamping system Visible Equipment FREUD Ø 450 mm circular saw blade, as shown on the photographed packaging.

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop Gusdpfx Agehrumaoroi - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus Gusdpjwq Nviofx Agroi -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm -Weight: 50 kg

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Pittler, self-opening thread cutting heads 2 pieces -Type: Model A No 3d L485 -Size: M7 x 1.25 1 piece -Size: Ø 24 mm recording MK4 1 piece -Price/tax: complete -Transport dimensions: 180/140/H310 mm Gjdpfjrvldujx Agroui -Weight: 8.5 kg