Condition: excellent (used), Year of construction: 2016, clamping force: 800 kN, Clamping force: 80 t Lodpfey Uffuox Apverl Screw diameter: 30 mm Distance between tie bars V: 180 mm Distance between tie bars H: 180 mm Type: Vertical Drive: Hydraulic

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Lrjdpsy Uffhofx Apvsl Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, Clamping force: 450 t Screw diameter: 55 mm / 35 mm Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Shot volume: 295 cm3 Type: Multicomponent Drive: Hydraulic \+ robot Wittmann Ljdoy Ufd Rjpfx Apvjrl \+ rotary table

Year of construction: 2018, condition: good (used), Prestar SSE 100 150 A03 (2018) Mould turner device 10 ton Mould turner 10Ton Lredpfjw Dtp Hex Apvol Year : 2018

Condition: excellent (used), Year of construction: 2014, clamping force: 2,500 kN, Equipment: documentation/manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 KN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Opening stroke (max.): 630 mm 5. Mould height (min. / max.): 320 / 830 mm Injection Unit Lodjxqhfyjpfx Apverl 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Injection speed (max.): 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Equipment of the machine:_ 1. BluePower servo pump drive system (energy-efficient servo-hydraulics) 2. Hydraulic core pull 1× on operator side \+ pressure release system 3. 8-fold water battery with magnetic valve shut-off 4. Hot-runner control 4 zones (ZE 88.5404) 5. MC6 control with 19″ Touch TFT screen 6. PV-control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. BluePower energy-saving servo drive system LRX 150 linear robot (payload < 15 kg), incl.: 1. X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm 2. B-servo / C-pneumatic rotation axes 3. Full integration (MC6 control interface) 4. Safety package – fencing, emergency stop, key switch 5. Vacuum circuits × 4 (Venturi) 6. Transport conveyor interface & control circuit 7. CE conformity declaration for integrated system (IMM + Robot) 8. Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084

Year of construction: 2012, condition: good (used), HOOPER LOADER Moretto F1F30 (2012) -electrical data: 230V; 50/60Hz; 1kW -capacity: 50dm3/h Ledjy Udlgspfx Apvjrl -weight: 11 kg

Year of construction: 2015, condition: used, Moretto DGM 120 S (2015) Gravimetric mixers (GRAVIX Series) These are robust, multi-component systems. In the photos you can see the characteristic funnels for the various components that the system weighs with extreme precision. The Moretto DGM Gravix 120 S dosing system belongs to the middle category of gravimetric dosing machines, which are characterized by extreme precision and resistance to industrial vibrations. -electrical data: 230V; 50/60Hz; 1kW -weight: 9,35 kg Main technical parameters This model is designed for precise mixing of multiple components directly at the machine neck. Ljdpfx Apoy Udkcsvjrl • Maximum performance: Up to 120 kg/h (depending on the bulk density of the material). • Accuracy: Up to ±0.001% thanks to the technology of weighing each component 100 times per second. • Number of components: Standard configuration for 2 to 4 materials (with the possibility of expansion according to the version). • Response speed: The patented "Double Eyelid" system opens and closes in 25 ms. • Weighing hopper volume: Optimized for medium-sized batches with free suspension without mechanical interference. _____ Key technologies • VIS (Vibration Immunity System): Allows installation directly on injection molding machines or blow molding machines without loss of accuracy due to machine movement. • Rotopulse: Special device for micro-dosing of additives (from 0.08 g), which prevents the formation of domes in the material. • Double-Effect Mixer: Hemispherical mixing chamber ensures a perfectly homogeneous mixture without "dead spots". • MOWIS Ready: Full connectivity for remote management, data export via USB, Ethernet or Modbus

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Ledpoy T Sm Nsfx Apvorl delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,596 h, clamping force: 6,500 kN, total width: 2,600 mm, total height: 2,700 mm, overall weight: 28,000 kg, product length (max.): 7,700 mm, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN Jupiter 3 JU 6500 features a clamping force of 6500 kN and an injection volume of 2212 cm³. It includes a maximum screw speed of 165 rpm and a tie bar distance of 1040 × 910 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Jupiter 3 JU 6500 machine we have for sale. Contact us for further details regarding this machine. Lsdpfoy T N Rfox Apverl • Reduced Clamping Force Software: 5500 kN • Injection Unit: 4630 • Screw Diameter: 80 mm • L/D Ratio: 22 • Injection Pressure: 2090 bar • Injection Volume: 2212 cm³ • Injection Weight: 525 g • Plasticizing Capacity: 73.6 g/s • Maximum Screw Speed: 0–165 rpm • Opening Stroke: 1350 / 800 mm • Tie Bar Distance: 1040 × 910 mm • Max. Mold Height: 950 mm • Min. Mold Height: 400 mm • Ejector Stroke: 250 mm • Ejector Force: 110 kN • Oil Tank Capacity: 600 L • Pump Power: 65 kW • Heating Capacity: 48 kW • Total Connected Load: 113 kW • Rated Power: 84 kW • Current Consumption: 156 A • Power Supply: AC400V / 3P / N / PE / 50Hz • Short Circuit Capacity: 25 kA • Controller: Keba 2985 • Touchscreen: 15-inch Touchscreen Display • USB Interface: Yes • Hydraulic System: Rexroth / Vickers Components • Core Pull Circuits: 4 • Pneumatic Circuits: 2 • Closed-Loop Temperature Monitoring: Yes • Oil Temperature Monitoring: Yes • Cooling Water Manifold: Included • Hopper: Movable Ball-Bearing Mounted Hopper • Mold Temperature Controllers: • Wittmann 8-Circuit Flow Controller • Additional 8-Circuit Flow Controller • Conveyor Belt: Included • Full Automatic Hours: 1,596.8 h Robot • Manufacturer: Sepro Group • Type: Linear Take-Out Robot • Robot Axes: 3-Axis • Robot Interface: Euromap 67 • Application: Automated Part Removal • Conveyor System: Included • Integration: Installed on Machine • Condition: Very good

Condition: like new (used), Year of construction: 2006, Clamping force: 220 tons Opening stroke: 650 mm Mould height: 300 mm Clamping platen daylight: 950 mm Tie bar daylight: 570 x 570 mm Mould clamping plattens (b x h) : 795 x 795 mm Ejector stroke: 225 mm Screw diameter: 50 mm Screw stroke: 200 mm Injection volume: 392 cm3 Shot weight: 359 g Injection pressure: 2000 bar Lodey Txgcjpfx Apvsrl Working hours: 10.444 Core pullers: 1x

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Lredpoyzylvjfx Apvsl Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Working hours: 50.000 h Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) \+ 2x Magnetic platten

Condition: ready for operation (used), Year of construction: 2023, operating hours: 6,000 h, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 771 g, Electrical injection moulding machine manufactured in 2023. This SUMITOMO SHI DEMAG IntElect2 S 220/660-1400 features a clamping force of 2,200 kN and a maximum mold opening stroke of 550 mm. The machine offers a daylight between platens of 1,150 mm and an injection unit size of 1400. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 S 220/660-1400 machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 660 x 660 mm • Mold platen size (H x V): 920 x 920 mm • Mold opening stroke (max): 550 mm • Daylight between platens (max): 1,150 mm • Mold height (min–max): 300–600 mm (optional: 300–800 mm) • Ejector stroke: 160 mm • Ejector force: 55 kN • Injection unit size: 1400 • Screw diameter options: 50 / 60 / 70 mm • Injection stroke: 220 mm • Calculated stroke volume: 432 / 622 / 847 cm³ (with 50 / 60 / 70 mm screw) • Max. shot weight (PS): 393 / 566 / 771 g (with 50 / 60 / 70 mm screw) Lrodpfoy Tv Iwsx Apvel • Max. injection pressure: 2,420 / 2,000 / 1,470 bar (with 50 / 60 / 70 mm screw) • Injection speed (max): up to 350 mm/s (high-performance S-drive specification) • Drive concept: All-electric with proprietary direct-drive technology • Core pull interfaces: 2 (hydraulic/electric options)

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA Ledpfx Asvkqfaepvjrl mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x) Lrjdpfx Apoyyyr Tjvel

Condition: ready for operation (used), Year of construction: 2003, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C Ljdpfjyyxmvjx Apverl • Mold opening force: 220 kN • Travel force (moving plate): opening 105 kN / closing 95 kN • Max. opening stroke: 920 mm • Min. mold height: 380 mm • Max. daylight: 1300 mm • Size of mold platens (H x V): 1060 x 1095 mm • Distance between tie bars (H x V): 710 x 710 mm • Ejector stroke: 250 mm • Ejector force (forward/backward): 95 / 49 kN • Max. mold weight: 4950 kg Additional equipment • Handling system: Wittmann with the following robot travel (X/Y/Z): 420 / 1200 / 2000 mm

Condition: ready for operation (used), Year of construction: 2007, clamping force: 8,000 kN, screw diameter: 85 mm, injection weight: 2,452 g, This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details. Lrodpfx Aeyyxc Dopvsl • Injection unit: 6100 • Injection volume: 2695 cm³ • Injection pressure: 2242 bar • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450°C • Availability: Early 2027 Additional equipment • Handling: Wittmann robot system • Model: W743 • Power: 400 V, 18 A / 12.5 kVA • Axes travel: X 1200 mm, Y 2000 mm, Z 4000 mm

Condition: excellent (used), Year of construction: 2015, Clamping force: 180 t Screw diameter: 35 mm Distance between tie bars V: 520 mm Distance between tie bars H: 570 mm Shot volume: 159 cm3 Type: Multicomponent Drive: Hydraulic Hydraulic cores: 3 + 1 \+ Rotary table Ljdpfey Tn Enex Apvjrl \+ Robot wittmann

Condition: excellent (used), Year of construction: 2016, Clamping force: 350 t Screw diameter: 45 mm Distance between tie bars V: 720 mm Lredpfx Apey Tn Dwjvel Distance between tie bars H: 800 mm Shot volume: 280 cm3 Type: Horizontal Drive: Hydraulic Hydraulic cores 1+1 \+ robot Wittmann

Condition: used, Year of construction: 2018, Battenfeld MacroPower 700/2250 UNILOG B8 Clamping force: 700 tons Screw diameter: 65 mm Shot volume: 422 cm3 Distance between tie bars: 1100 x 950 mm Mold height: 450 x 950 mm Hot runners: 16 Ljdpfx Apjy Tn Dksverl Core pullers: 2 + 2 \+ Robot Wittmann W833PRO-0469 (X-900, Y-1800, Z-3000, Payload: 10,6 kg)

Condition: excellent (used), Year of construction: 2014, operating hours: 50,512 h, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 470C-1500-400 injection molding machine with sorting flap (256) Number: 256 Availability: in stock Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Tongue: English, German Installed power [kW]: 30.4 Working hours [h]: 50.512 Weight [kg]: 4850 Dimensions [mm]: 4500×1700 Feed hopper: NO Core string: 2x Robot socket: euros 67 Lrodpfx Apoy Tmmwjvjl Air valve: Yes

Condition: ready for operation (used), Year of construction: 2011, operating hours: 40,535 h, clamping force: 5,000 kN, screw diameter: 100 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 1.5 kg Lrjdpfx Ajy Tk Thspvjl • Minimum mould dimensions: 480 mm • Tie bar spacing: 900 x 800 mm • Maximum mould opening: 1530 mm • Working hours: 40,535 h

Condition: used, Year of construction: 2024, clamping force: 650 kN, displacement volume: 2,212 cm³, injection pressure: 2,090 bar, overall weight: 28,000 kg, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) delivery time: on request Ljdpfjy Tbzvjx Apverl terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,519 h, clamping force: 5,000 kN, screw diameter: 100 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details. • PP injection capacity: 1.5 kg Lredpfjy Tai Ejx Apvel • Mould dimensions, min.: 480 mm • Tie bar spacing (H × V): 900 × 800 mm • Maximum mould opening: 1530 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,858 h, clamping force: 4,200 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine. Lredey S Tw Hjpfx Apvel • Injection capacity (PP): 1.2 kg • Minimum mould dimensions: 380 mm • Tie bar spacing: 800 x 800 mm • Maximum mould opening: 1400 mm • Working hours: 44,858 h

Condition: ready for operation (used), Year of construction: 2012, operating hours: 46,424 h, clamping force: 3,500 kN, screw diameter: 80 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Minimum mould dimensions: 380 mm • Tie bar spacing: 710 × 710 mm Ljdpfx Ajy S Tvvspvorl • Maximum mould opening: 1260 mm