Condition: excellent (used), Year of construction: 1998, Arburg 270C 500-100 Year of manufacture: 1998 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2500 bar Metering volume: 31 ccm Clamping unit : clamping force: 50 t tie bar distance: 270x270 mm Dsln Hjwcmkbjy Hpokl size of clamping platens: 446x446 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot interface Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal The machine has an additional control panel - control by remote control The machine has been regularly serviced by the authorized service Arburg Dimensions: Weight: 2200 kg Length/width/height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,3 kW Total power: 21,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2015, Technical Datasheet – ENGEL DUO 7050/1500 WP 🔩 Clamping Unit: 1. Clamping force: 15,000 kN 2. Opening force (with pressure cushion): 1,000 kN 3. Opening force (without cushion): 476 kN 4. Opening stroke: 2,550 mm 5. Mold height (min – max): 700 – 1,360 mm 6. Max. daylight (platens open): 3,250 mm 7. Platen dimensions (H × V): 2,420 × 2,170 mm 8. Tie bar spacing (H × V): 1,865 × 1,430 mm 9. Tie bar diameter: 250 mm 10. Max. mold weight: 45,000 kg (2/3 on moving platen) 11. Ejector stroke: 300 mm 12. Ejector force: 230 kN 13. Dry cycle time (Euromap 6): 4.8 s 14. Dry cycle stroke: 1,300 mm 🧩 Injection Unit: 1. Screw diameter: 105 mm 2. Screw stroke: 480 mm 3. Injection volume: 4,160 cm³ 4. Screw speed (max): 130 rpm (up to 150 rpm with performance adjustment) 5. L/D ratio (3-zone screw): 22 6. Plasticizing rate (3-zone screw): 113 g/s (max. 130 g/s) 7. Plasticizing rate (barrier screw): 148 g/s (max. 171 g/s) 8. Injection speed: 800 cm³/s (630 cm³/s at higher pressure) 9. Injection pressure (standard/boost): 1,650 / 2,090 bar Doln Hy Hswfgi Aepjkl 10. Nozzle stroke: 950 mm 11. Nozzle contact force: 150 kN ⚙️ Drive & Energy: 1. Installed power (injection unit): 74 kW 2. Heating zones (incl. nozzle): 7 3. Pump drive power: 161 kW 4. Oil tank volume: 1,800 liters ⚖️ Machine Weight: 1. Clamping + Injection Unit: 66 tons 2. Approx. additional components: 17 tons

Condition: excellent (used), Year of construction: 2015, Wittmann Batenfeld SmartPower Djljwgxt Nen Hy Hpekl 110/525 Unilog B6 Control

Year of construction: 2006, Condition: ready for operation (used), Injection Unit Screw diameter 55 mm Clamping Unit Opening stroke 700 mm Distance between bars 560 x 560 mm Dkslsupm S Non Hy Hpsl Additional Equipment Core Valve: 1 Air Valves: 3 EU 12 for Robot Connection: Yes This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, Year of construction: 2013, operating hours: 26,000 h, clamping force: 50 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, terms of delivery: EXW (ex Works) Djln Hy Hsppigdopjkl delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: good (used), Year of construction: 1994, Hercules 90 tons injection press Year : 1994 Injectable volume : 139cm3 Passage between columns: 445x445 Ejection stroke 110mm Opening stroke : 380mm Min. mould thickness: 180mm Maximum thickness: 400mm Diameter of centering ring : 125 Nozzle radius : 15.5mm Ejection coupling in M16, 3 blowers, 1 programmable core, euromap interface for robot connection. Doln Hy Heizi Irjpskl

Condition: excellent (used), Year of construction: 2006, Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Dolnjwcml Eo Hy Hpskl Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 2400 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating output: 9.4 kW Total output: 20.4 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, ENGEL DUO 17060/2700 (2021) 🔧 Technical Specifications • Clamping force: 27,000 kN • Tie bar spacing (horizontal × vertical): 2,130 × 1,750 mm • Platen size: 2,970 × 2,640 mm • Mold height (min–max): 800 – 1,900 mm Dksln Hewd Sywsy Hpsl • Opening stroke: 3,100 mm • Max. distance between platens: 5,090 mm • Dry cycle (Euromap 6, 6 mm stroke): 5.8 s • Max. mold weight (fixed/moving platen): 50,000 kg each 🧩 Injection & Plasticizing Unit • Screw type: S4V G18 • Screw diameter: 150 mm • Injection volume: 10,780 cm³ • Injection pressure (max): 1,620 bar • Injection speed: 87 mm/s • Plasticizing rate (barrier screw): 235 g/s • Screw speed: up to 115 rpm 🔩 Nozzle & Ejector • Nozzle stroke: 1,300 mm • Nozzle contact force: 210 kN • Ejector stroke: 400 mm • Ejector force: 385 kN ⚙️ Drive & Power • Main motors installed power: 192 kW • Reload pump motor: 16 kW • Oil reservoir capacity: 1,600 liters • Main power: 3×400V, N+PE / 50 Hz ➕ Additional Features & Configuration • T-slot platen with ejector back confirmation • Locating ring Ø 120 mm • Sprue bush “R”: 19 mm • Hydraulic corepull 2+2, air valve 1+1 • Mold heating control with 144 zones (24pin, K-type) • Valve gate interface with 36 zones (16pin DC24V) • Abrasion/corrosion-resistant screw barrel • Servo hydraulic drive • Oil maintenance system • UPS (AVR) backup unit • Robot interface EM67 • Cooling circuit: 1” inlet, 2 zones per platen (90°) • Autoclamp system for fast mold changes

Condition: good (used), Year of construction: 1997, Ref. no.: 18552 Doln Hjwgp Dfey Hpskl Hersteller: BOY Type: 22 M Year of construction: 1997 Clamping unit Clamping force: 22 ton Opening stroke: 200 mm Distance between tie bars: 254 mm Mould height min.: 200 mm Mould height max.: 400 mm Platen size (h x v): 425 x 400 mm Injection unit Screw diameter: 28 mm Injection volume: 49 cm³ Shot weight: 44 g Injection pressure: 1069 bar Measurements and weight Dimensions: 2.3 x 0.81 x 1.63 m Machine weight: 760 kg

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 2650 mm Measurements depth 9360 mm Measurements height 2430 mm Machine weight 43400Kg Injection Unit Screw diameter 80 mm Clamping Unit Opening stroke 1150 mm Distance between bars 1000 x 930 mm Additional Equipment Core Valve: 1 Air Valves: 3 EU 12 for Robot Connection: Yes Attached you will find some drawings with fundament and platens. This Krauss Maffei 600 - 3500 C3 hydraulic injection moulding machine was manufactured in 2006. It features a tie bar distance of 1000 x 930 mm and an opening stroke of 1150 mm. Equipped with 1 core valve, 3 air valves, and a screw diameter of 80 mm, it also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding Dkjln Hyjupm Uqe Hpel

Condition: used, Year of construction: 2008, operating hours: 37,200 h, clamping force: 160 kN, screw diameter: 40 mm, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Dolnowd Udlo Hy Hpekl

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of manufacture: 1999 injection unit: Screw diameter: 35 mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Dkolnjwcmugs Hy Hpol Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Euromap 12 Robot interface Core pull control injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2006, Model: HM 210/1000 S Clamping force: 210 t Dsln Heu Ekbhsy Hpskl Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 Shot weight: 440 g Transport parameters: weight 10000 kg, L x W x H: 5000 x 1700 x 2300 mm Controll: Unilog B4 Videos on request.

Condition: good (used), Year of construction: 2010, Ref. no.: 18482 Hersteller: KRAUSS MAFFEI Type: KM 300 / 2000 CX Year of construction: 2010 Clamping unit Clamping force: 300 ton Opening stroke: 820 mm Distance between tie bars: 810 X 720 mm Mould height min.: 480 mm Opening width: 1300 mm Injection unit Screw diameter: 60 mm Injection volume: 792 cm³ Shot weight: 720 g Injection pressure: 2420 bar Measurements and weight Dimensions: 6,7 X 2,1 X 2,4 m Machine weight: 16400 kg Additional information & extras Accumulator: 1 pcs Djln Hyjwgp Ans Hpokl Robot Producer: Krauss Maffei Type: KM LRX S 250 Year: 2010

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 1480 Measurements depth 4970 Measurements height 2160 Machine weight 8000 Djlnjuzayxe Hy Hpjkl Injection Unit Screw diameter 55 mm Shot weight 476 g Stroke volume 523 cm³ Injection pressure 1904 bar Screw speed 196/280 1/min Clamping Unit Clamping force 1500 kN Opening stroke 600 mm Distance between bars 500 x 500 mm Size of mold platens 780 x 790 mm Ejector stroke 150 mm Ejector force for / back 22/11 kN This hydraulic injection moulding machine was manufactured in 1997. It features a clamping force of 1500 kN and a screw diameter of 55 mm, suitable for precise injection moulding processes. The machine dimensions are 4.97 x 1.48 x 2.16 m, and it weighs 8 tonnes. If you are looking to get high quality moulding capabilities consider the Krauss Maffei KM 150-1000 C1 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, Arburg 420S 800-350 Year of construction: 11.2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Injection pressure: approx. 1300 bar Dosing volume: 288 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Dkjlnowcmvwo Hy Hpel Euromap 12 Robot interface Air valve x 1 Core pull control Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Integrated original Arburg side sprue picker Dimensions: Weight: 3800 kg Length/width/height: 4.06x1.39x2.12 m Drive: Pump/motor: 18.5 kW Heating output: 10.2 kW Total output: 28.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2004, Ref. no.: 18481 Hersteller: ARBURG Type: 320 C 600 – 250 Year of construction: 2004 Clamping unit Clamping force: 60 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 200 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 25 mm Injection volume: 45 cm³ Shot weight: 40 g Injection pressure: 2500 bar Dksln Hy Hjwgp Ahepol Measurements and weight Dimensions: 3,5 X 1,5 X 1,7 m Machine weight: 2330 kg

Year of construction: 2016, Condition: ready for operation (used), General Data Machine weight 800 kg Control Unit Brand B&R Model Power Panel PP 65 This Krauss Maffei KM-RS 500 XS was manufactured in 2016. An injection moulding machine featuring an optional belt conveyor table and a robust B&R Power Panel PP 65 display. It handles a max saw blade diameter of 500mm and a saw blade holder of 30mm. Ideal for precise cutting with varying profile heights. A great opportunity to buy this Krauss Maffei KM-RS 500 XS injection moulding machine. Contact us for further details regarding this injection moulding machine. Dsln Hyet Iykcs Hpekl Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2014, Krauss Maffei KM 200-750 CX with the Wittmann-Krauss Maffei LRX100-1811 robot Year of construction: 2014 Injection unit: Dkelswcmztjn Hy Hpel Screw diameter: 45 mm Injection weight: 289 g Injection pressure: 2336 bar Metering volume: 318 ccm Clamping unit: Clamping force: 200 t Distance between tie bars: 560x560 mm Size of the clamping platens: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touch screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min. tool installation height - 350 mm Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners x 24 Hardened injection unit - bimetal Parallel movements Proportional valve on the injection unit - Precise injection Kistler sensor - mold pressure control Wittmann-Krauss Maffei LRX100-1811 robot Year of construction: 2014 High-speed robot 5-axis robot: 3 axes are driven by servomotors (electric); axes B and C - pneumatic Touch control panel Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 11500 kg Length/width/height: 5.32x1.98x2.06 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection unit: Screw diameter: 45 mm Injection weight: 278 g injection pressure: 2336 bar Metering volume: 305 ccm Clamping unit: clamping force: 110 t tie bar distance: 470x470 mm size of clamping platens: 745x770 mm ejector: hydraulic clamping unit: hydraulic Control system: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Parallel movements Proportional valve on the injection unit - precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine has been regularly serviced by the authorized service Krauss Maffei in Switzerland Dimensions: Weight: 6200 kg Length/width/height: 4.66x1.51x2.19 m Propulsion: Pumps/motor: 18.5 kW Heating power: 16 kW Total power: 34,5 kW All offered machines are started by our service technicians before sale. Dkjln Hyowcm Dus Hpjl It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 110-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Core pull control Control system with hot runners Dolnjwcm Els Hy Hpjkl Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Dsln Hjwcm N Rjy Hpjkl Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Dolswcm Rbsn Hy Hpjkl Turntable diameter: 740 mm In both injection units there is an option to replace the screw diameter with a smaller or larger one Robot Sepro Multi Inject 20 Year of construction: 2018 4-axis robot: 4 axes are driven by servomotors (electric): X, Y, Z, B (rotation) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Djlnewcngks Hy Hpjkl Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Arburg 570S 2200-1300 / Production line with the Arburg Multilift robot Year of manufacture: 11.2010 Dkelnowcnmws Hy Hpol Injection unit: Screw diameter: 60 mm Injection weight: 607 g Injection pressure: 2000 bar Dosing volume: 664 cc Clamping unit: Clamping force: 220 t Bar spacing: 570x570 mm Clamping plate size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touch screen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 4 Control with hot runners x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The machine was regularly serviced in Germany Robot Arburg Multilift Year of manufacture: 11.2010 5-axis robot: 3 axes are driven by servo motors (electric); axis B (revolution), axis C - pneumatic Travel paths in axes: X-400, Y-800, Z-1800 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 10090 kg Length/width/height: 5.89x1.90x2.228 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request