Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 17.083 in automatic mode Pneumatic core x 2 Rjdpfxexqx Aij Ag Ajch injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: like new (used), Year of construction: 2006, Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Rsdpfx Agjxqx H Io Ajch Machine Weight:4 500 kg

Year of construction: 2001, condition: excellent (used), Injection cylinder nIKR Year of manufacture: 2001 Rodpsxta Tnefx Ag Ajch Unit 500 Screw diameter before cutter: 45 mm

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Rcodporp Dyrjfx Ag Ajh Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2009, Battenfeld HM 180 /525H/60V Clamping force: 180 t Rcsdsxta Ewspfx Ag Ajh Year of manufacture: 2009 Injection weight: 175/20.8 g Injection unit .../525/....60 Screw diameter: 35/18 mm Specific injection pressure: 2743/2593 bar Injection volume: 193/22.9 ccm Injection weight: 175/20.8 g Screw L/D ratio: 22/20 Clamping unit 180/... Clamping force: 180 t Tie bar distance: 570 x 520 mm Mold height: 305 mm Ejector stroke: 200 mm Year of manufacture: 2009 Equipment: Servo-driven rotary table 3 x hydraulic core pulls

Condition: ready for operation (used), Year of construction: 2008, operating hours: 98,000 h, Clamping Unit Clamping force 240 ton This Netstal SynErgy 2400-900 was manufactured in 2008. An hydraulic injection moulding machine with 98,000 hours of service and a clamping force of 240 tons. Consider the opportunity to buy this Netstal SynErgy 2400-900 injection moulding machine. Contact us for more information. Rcsdpoxqtapsfx Ag Ash Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition. Year of manufacture: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 18.153 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Rjdpfjxqxzxsx Ag Aoch Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Rcodpoxqx Avjfx Ag Aeh Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Year of construction: 1990, condition: used, Electric cards for Engel machines Rsdexr U Dfspfx Ag Aech

Condition: excellent (used), Year of construction: 2014, operating hours: 29,497 h, functionality: fully functional, machine/vehicle number: 230240, clamping force: 2,000 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Here, as a dealer specializing in injection moulding machinery, we are offering the following well-maintained used injection moulding machine: Rcjdpjuuf Iasfx Ag Aeh Naturally, we also purchase well-maintained injection moulding machines from model year 2010 onward. We have been a leading wholesaler of used injection moulding machines for over 25 years. Important notice – Tax advantage for used machines: From 01.07.2025, used machines can also benefit from a special depreciation scheme of 30% annually. In addition to the lower purchase price compared to new machinery, you can utilize the same depreciation allowances as with new machines (see: 'Growth Booster', (§ 7 paragraph 2 EStG-E)). Offered Machine: Arburg 1500T 2000-400 Vertical Rotary Table Machine Machine No. 225999 A full list of equipment is available in the downloadable documents (machine card). Control: Selogica Year of manufacture: 2013 • Total machine cycles: only 1,907,296 • Automatic operation hours: 42,160 Clamping Unit • Distance between platens: 700 mm • Clamping force: 200 t / 2000 kN • Mould installation height: 400 mm • Table diameter: 1500 mm • Rotary angle: 180° • Rotation time: 2.4 s min. • Maximum weight on rotary table: 1,050 kg • Ejector force: 45 kN / 175 mm stroke Injection Unit • Screw diameter: 40 mm • Shot volume: 201 ccm • Injection weight: 184 g • Injection pressure: 2,000 bar Extras • 2-station rotary table, 180° forward/reverse alternating operation with servo-electric rotary drive and hydraulic locking pin for fine-centering of the rotary plate in end position; separating guard between clamping and loading areas, the height on the rotary plate adjustable to suit the mould bases, with media lines and connections for the mould bases • Rotary table diameter: 1500 mm • Max. clamping force: 2000 kN • Injection unit according to EUROMAP 400 • Screw diameter: 40 mm • Special ergonomic rotary table version with the following features: - Corrosion protection treatment for rotary table (VE 574/90) - Water connections: 2 circuits - 3 hydraulic connections for needle shut-off system - 3 core pulls - Per station: one core pull and 2 x tempering - 6 x mould temperature control - 12 control zones for mould heating circuits - 2 x Kistler cavity pressure sensors - Temperature monitoring for start-up components • Weight: 11,200 kg • Power: 22 kW motor – heating power 9.4 kW (5 zones) – connected load 100 A The machine is offered fully tested for functionality, fully operational with a start-up guarantee – tested before dismantling. About our company and offered machines: - We only sell our own machines purchased from current production, from our warehouse in Hannover. - All offered machines are tested before dismantling. - We DO NOT deal with insolvency goods – we are NOT brokers trading in third-party property. - All machines stem from successful businesses with a proven maintenance and servicing record. - All listed machines can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech General Information Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Rcedpfxoxta A As Ag Ajh Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2183 bar Clamping system: 200/... Platen dimensions: 860 x 570 mm Mould mounting height: 400 mm Opening stroke: 750 mm Maximum platen gap: 1150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core pulls on the moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2011, Arburg A 320 C 500-170 GE (S&P 3783) Manufacture year: 2011 Operating hours: 42,000 Stunden Screw: 30 mm Injection pressure: 2000 bar Stroke volume: 85 cm³ Clamping Force: 50 t Tie bar distance: 320 x 320 mm Mould installation height min.: 200 mm Rcedpfsxr Dx Sex Ag Ash Plate distance max.: 550 mm Connected load: 11 kW price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2006, LWB Steinl VCRS-T 300/36 T / Machine like new Year of construction: 2006 Spraying unit: Metering volume: 36 ccm Clamping unit: Rcedpoxqxzlofx Ag Aoh Clamping force: 30t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Additional equipment: Hydraulic core pull x 1 Control unit with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 254387, clamping force: 3,000 kN, screw diameter: 70 mm, clearance between the columns: 630 mm, displacement volume: 1,047 cm³, injection pressure: 1,778 bar, injection weight: 953 g, ejector stroke: 200 mm, opening stroke: 1,150 mm, plate width: 1,050 mm, plate height: 995 mm, installation height: 330 mm, total length: 6,210 mm, total width: 2,040 mm, total height: 2,380 mm, overall weight: 12,500 kg, number of injections: 1, Equipment: documentation/manual, All items are sold as used and untested unless otherwise specified. Only the injection moulding machine is offered for sale, without handling device or accessories. Please pay attention to the item description. Rjdpfx Asxr Dfrjg Asch

Year of construction: 2002, condition: used, elv Bochum Rcsdpfx Aoxr Uvnog Aoh Network 24V= Magnet 12V

Condition: good (used), Year of construction: 2013, Ref. no.: 18577 Hersteller: ARBURG Type: 520 A 1300 - 400 ALL DRIVE Year of construction: 2013 Redpoxdxnxofx Ag Aoch Clamping unit Clamping force: 130 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 115 g Injection pressure: 2500 bar Measurements and weight Dimensions: 5,8 x 1,7 x 2,3 m Machine weight: 7100 kg

Condition: excellent (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, Battenfeld HM 500/3400 Injection Moulding Machine Clamping force: 500 t Year of manufacture: 2007 Shot weight: 1937 g Injection unit .../3400 Screw diameter: 85 mm Specific injection pressure: 1574 bar Rcodpfjxtaxkex Ag Aoh Injection volume: 2128 ccm Shot weight: 1937 g Screw L/D ratio: 22 Clamping system 500/... Clamping force: 500 t Platen dimensions: 1590 x 1470 mm Tie bar spacing: 1000 x 800 mm Mould height: 450 mm Opening stroke: 1150 mm Maximum platen distance: 1600 mm Ejector stroke: 250 mm General data: General data: Weight: 25,000 kg Dimensions [L x W x H] [m]: 7.3 x 2.5 x 2.6 Equipment: - 1 x pneumatic valve - 2 x hydraulic cores - Euromap 67 interface - Bimetallic injection unit

Condition: excellent (used), Year of construction: 2016, DR.BOY 55 A DUROPLAST (7.278 h) (S&P 3725) Rcsdpoxr Dx Eefx Ag Aeh Year: 2016 Operating hours: 7.278 h Screw: 32 Duroplast mm Injection pressure: 2127 bar Injection volume: 96 ccm Clamping force: 55 t Tiebare distance: 360 x 335 mm Mouldheight: 250 mm Daylight max.: 650 mm Size: 3200 x 1200 x 2000 mm Weight: 2430 kg Power: 11 kW Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2006, functionality: fully functional, clamping force: 2,000 kN, Demag Ergotech Extra 200-600 Plastic Injection Moulding Machine Type: Extra 200-600 Year: 2006 Rcsdsw H Sw Hepfx Ag Aeh Screw diameter: 45 mm Injection pressure: 1910 bar Shot weight (PS): 291 g Nozzle contact force: 60 kN Clamping force: 2,000 kN Holding force: 2,200 kN Max. opening stroke: 575 mm Mould mounting platens: 860 x 860 mm Max. mould weight: 2,500 kg Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN The machine is in very well-maintained original condition. Complete and detailed documentation is available. Inspection under power can be arranged at short notice. For further questions, please do not hesitate to contact us. Price: ex stock here plus VAT Condition: good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Subject to prior sale and errors. We look forward to receiving your order. Additional machines and equipment available from stock – please enquire. We look forward to your inquiry.

Condition: used, Year of construction: 1998, operating hours: 71,351 h, functionality: fully functional, machine/vehicle number: 254156, clamping force: 2,500 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 679 cm³, injection pressure: 2,000 bar, injection weight: 618 g, ejector stroke: 200 mm, opening stroke: 1,150 mm, plate width: 1,050 mm, plate height: 995 mm, installation height: 330 mm, total length: 5,970 mm, total width: 2,040 mm, total height: 2,390 mm, overall weight: 12,000 kg, number of injections: 1, Equipment: documentation/manual, All items are sold as used and untested unless otherwise stated. Please pay attention to the item description. Rcsdpfoxr Dc Djx Ag Ash

Year of construction: 2012, condition: used, E-CG-CONTROL For injection moulding machine Engel Rsdpfxexr Ut He Ag Asch

Condition: excellent (used), Year of construction: 2012, ARBURG A 270 C 400-70 GE (S&P 3784) Manufacture year: 2012 Operating hours: 43,000 Stunden Screw: 22 mm Injection pressure: 2000 bar Stroke volume: 34 cm³ Clamping Force: 40 t Tie bar distance: 320 x 320 mm Mould installation height min.: 200 mm Plate distance max.: 550 mm Connected load: 7,5 kW Rodpoxr Dxrefx Ag Aoch price: on request contact: Mr. Ralf Schulz

Year of construction: 1992, condition: used, more powerful Rsdpfexr Uriex Ag Aech Rexroth 2 pieces

Condition: excellent (used), Year of construction: 2014, ARBURG A 320 C 500-170 GE e² (~9.000 h)(S&P 3782) Manufacture year: 2011 Operating hours: 42,000 Stunden Screw: 30 mm Rcjdjxr Dxlopfx Ag Ajh Injection pressure: 2000 bar Stroke volume: 85 cm³ Clamping Force: 50 t Tie bar distance: 320 x 320 mm Mould installation height min.: 200 mm Plate distance max.: 550 mm Connected load: 11 kW price: on request contact: Mr. Ralf Schulz

Year of construction: 2012, condition: used, Electric cards E-CPU-186-B6-1.2 for Engel injection moulding machine Rcjdpfx Agexr Uqls Ajh