Krauss Maffei 125-390 C1 (2004) low working hours !

KraussMaffei 125-390 C1

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT Ppodpfx Aaeud N Hdeljl  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2004, condition: good (used), For sale is an injection molding machine Krauss-Maffei and type 80-220C2 year of manufacture 2004 Machine number: 61004457 Clamping force 80 tons Equipment: -cylinder D35 -1 Hydraulic core pull -Pneumatic valve gate -tie bar pulling device on counter-operating side Ppsdpfjiq U Szox Aaljl -48000 operating hours. Inspection possible by appointment. The machine is under power and ready for immediate use. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, Year of construction: 2006, operating hours: 60,000 h, Injection molding machine Krauss Maffei 50-180 CX Ppedev Tmzpjpfx Aalel Year 2006 screw di 30

Condition: refurbished (used), Krauss Maffei injection molding machine 25 tons Year: 2000 Pedpfjrdg Tpsx Aalopl IPC not working (see map)

Condition: ready for operation (used), Year of construction: 1998, Stock-No. 13610 Manufacturer Krauss Maffei Type of machine KM 110 – 390 C2 Year 1998 Working hours h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 1100 kN Mould opening force, max. 70 kN Travel force movable platen opening 35 kN Travel force movable platen closing 28 kN Size of mould platens (h x v) 745 x 770 mm Distance between tie bars (h x v) 470 x 470 mm Ppedpfx Aasub S Ulolel Mould opening stroke 600 mm Mould height min 300 mm Max. daylight 900 mm Hydraulic ejector - stroke 150 mm Ejector force 22/10 kN Injection unit: Screw diameter 35 mm Ls/D ratio 23 Injection pressure 2429 bar Stroke volume 156 ccm Shot weight (PS) 142 gr. Injection rate 123 ccm/s Screw speed 391 1/min Plasticising rate max. 22 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 18,5 kW Installed heating capacity 12 kW Adjustable barrel heating zones 5 Reservoir capacity 345 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 1,60 x 2,00 m Total machine weight 6000 kg Max. mould weight 1485 kg Accessories: - Anti vibration pads - 6 x Water flow Additional Options: - 2 x air valve - 2 x core pull - Robot interface according to Euromap 12 - Electrical screw drive - Accumulator

Year of construction: 2008, condition: ready for operation (used), Press force: 1100kN, screw diameter: 35mm, injection weight: 140g, stroke volume: 154cm³, injection pressure: 2429bar, max. barrel temperature: 375°C, weight: approx. 8000kg, control: MC 5 3.0, operating hours: 25271h, pump hours: 29098h. Including one linear robot KM LRX 150, travel X/Y/Z: 900mm/1200mm/3000mm, load capacity: 15kg. Documentation available. On-site inspection is possible. Ppjdpfx Aswz N Tvjaljl

Condition: used, Year of construction: 1999, Krauss Maffei 80-220 C2 (1999) Clamping force: 80 t Screw diameter: 35 mm Shot weight: 115 g Distance between tie bars V: 405 mm Distance between tie bars H: 405 mm Injection pressure: 1837 bar Type: Horizontal Ppedpfx Aaswufwqjlel Drive: Hydraulic

Condition: good (used), Year of construction: 2004, clamping force: 800 kN, screw diameter: 35 mm, For sale is an injection molding machine by Krauss-Maffei, type 80-220C2 The machine comes from a clean operation that places great importance on maintenance and is fully operational immediately after installation Year of manufacture: 2004 Machine number: 61004709 Clamping force 80 tons Podpowqmvgofx Aaljpl Equipment: -Cylinder D35 -1 hydraulic core pull -Pneumatic needle shut-off -Tie bar withdrawal device on the operator’s opposite side Transport and loading can be organized throughout Europe for an additional charge if desired. Prices plus VAT Inspection possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machines buying / selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further info or means of contact, visit our website

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 80-380 CX Injection Moulding Machine Year of manufacture: 2010 Clamping unit Clamping force: 800 kN Mounting plate dimensions (H × V): 670 × 670 mm Space between tie bars (H × V): 420 × 420 mm Psdjxw Upfopfx Aalopl Mould height (min./max.): 250 mm Maximum opening: 750 mm Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight (PS): 183 g Injection pressure: 1860 bar Electro-hydraulic equipment Pump motor power: 15 kW Heater power: 10.9 kW Dimensions and weight Machine dimensions (L × W × H): 4.09 × 1.48 × 2.02 m Weight (with control cabinet): 3.55 t

Condition: ready for operation (used), Year of construction: 2013, clamping force: 1,100 kN, total height: 470 mm, product length (max.): 470 mm, This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. • Mold opening force: 70.0 kN • Clamping plate (L x W): 745 x 770 mm • Internal dimensions (L x W): 470 x 470 mm • Mold opening stroke max: 600 mm • Mold installation height min: 300 mm • Opening width: 900 mm Additional equipment • Robot (included) • Water temperature control equipment (not included) • Conveyor belt (not included) Ppjdpfx Aaex D Ea Uoljl