Arburg 470 C 1500-350 (2006) low working hours !

Arburg 470 C 1500-350

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Here we, as a trading company for injection moulding machines, are offering the following well-maintained used injection moulding machine. Of course, we also purchase well-maintained injection moulding machines from the year of manufacture 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current notice – Tax information and advantage for used machinery: From 01.07.2025, used machines will also be eligible for a special depreciation allowance of 30% per year for tax purposes. In addition to the more attractive price compared to a new machine, you may claim the same depreciation amounts as with new equipment (ref: Growth Booster, § 7 Abs. 2 EStG-E). Used Injection Moulding Machine with 2 additional available injection units (25 mm and 35 mm) Machine is currently fitted with a 50 mm injection unit. See document for download. Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Dcodow Rm Hdspfx Aa Esd Clamping Unit Clamping force: 1500 kN / 150 tons Tie bar spacing: 470 x 470 mm Mould mounting plates: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mould installation height: 250 mm Maximum daylight between platens: 750 mm Injection Unit 50 mm (high wear-resistant) Shot volume: 392 ccm Shot weight: 359 g Screw diameter: 50 mm Injection pressure: 1670 bar Extras - 2 additional injection units: 25 mm and 30 mm - 1 x core pull - Conveyor belt installed in machine bed - Handling interface - Geiger part removal device - Selection unit - 2 x air blowing ports - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2: servo-driven proportional pumps - 9 electrical heating circuits - Interface for mould temperature control unit - Interface for dosing unit - Equipment package - Extended monitoring, extended movement controls, production control, optimisation/operator guidance, quality assurance, documentation Visible peripheral devices not explicitly named are not included in the scope of delivery. - Immediately available from our warehouse in Hanover. Free loading or free delivered, subject to shipping costs - Function tested (guaranteed functionality up to initial commissioning)

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun Djdpfxsu E E Suj Aa Ejcd

Condition: like new (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Used injection moulding machine – with 3 interchangeable injection units (25, 35, and 50 mm) Currently fitted with 50 mm unit Includes Geiger picker, integrated conveyor belt From ongoing German production, fully functional See document for download Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Clamping unit: - Clamping force: 1,500 kN / 150 tons - Tie bar distance: 470 x 470 mm - Platen size: 650 x 650 mm - Ejector stroke: 175 mm - Opening stroke: 500 mm - Min. mould height: 250 mm - Max. daylight between platens: 750 mm Injection unit (50 mm): - Shot volume: 392 cm³ - Shot weight: 350 g - Screw diameter: 50 mm - Injection pressure: 1,670 bar Alternatively, 25 mm and 35 mm injection units included Extras: - Geiger picker - Handling interface - 2x air blow-offs - Accumulator for fast injection - 9 electric heating zones - 4 free cooling circuits - Optional equipment packages: Extended monitoring, enhanced motion controls, production management, process optimisation / operator aids, quality assurance, documentation Dsdpfx Asvhb Iyoa Escd - Electric conveyor belt - Sorting unit Documentation and software available in German (fully comprehensive) - Immediately available from our Hannover warehouse, loaded ex works or delivered (shipping at cost) - Function tested (guaranteed function up to first commissioning)

Condition: excellent (used), Year of construction: 2003, clamping force: 1,500 kN, screw diameter: 45 mm, injection pressure: 1,670 bar, injection weight: 210 g, Arburg 470C-1500-350(166) General information Product Code: 166 Availability: In Stock Year of production: 2003 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,500 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 470x470 mm Platen size: 650x650 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 40,2 kW Djdsvt S Egspfx Aa Escd Workinghours: 83824 h Weight: 4410 kg Dimensions: 4,5 x 1,8 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. Dcodpfow Tt R Isx Aa Eod - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Dcedpfx Aexqdtaea Eed Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Dcjdpoxvy Rljfx Aa Eed Hersteller: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Machine weight: 4850 kg Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67).

Condition: excellent (used), Year of construction: 2006, operating hours: 95,822 h, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 188 cm³, injection pressure: 1,530 bar, injection weight: 172 g, mold height (min.): 250 mm, Arburg 420C-1000-290 injection molding machine with sorting flap Number: 239 Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter [mm]: 40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Closing force [kN]: 1000 Column spacing [mm]: 420x420 Plate size [mm]: 570×570 Min. form height [mm]: 250 Control type: Selogica Tongue: german Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400×2000 Feed hopper: NO Robot nest: Yes Core string: Yes Dedpfjwwi Huex Aa Eocd

Condition: excellent (used), Year of construction: 2005, clamping force: 1,300 kN, screw diameter: 35 mm, injection pressure: 2,500 bar, injection weight: 127 g, Arburg 470S-1300-350 (170) hybrid with electric screw drive, without hopper General information Product Code: 170 Availability: In Stock Dedpfx Aasvt Tn Nj Eocd Year of production: 2005 Brand: Arburg Technical data Shot Weight: 127 g Clamping Force: 1,300 kN Screw dia: 35 mm Injection pressure: 2500 bar Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Mould height min.: 275 mm Type of controls: Selogica Language: German Power: 33,9 kW Workinghours: 85.400 h Weight: 5.100 kg Dimensions: 5 x 1,8 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, functionality: fully functional, machine/vehicle number: 221240, screw diameter: 40 mm, injection weight: 172 g, Here we offer, as a dealer in injection moulding machines, the following well-maintained pre-owned injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with equipment for vertical injection Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition: very well maintained Extras: - Device for vertical injection - 1 core pull circuit - Additional heating band connection - 5 freely adjustable manual cooling circuits - Air valve connection controllable via Selogica - Equipment packages: quality assurance, documentation, extended monitoring, production control, etc. Dodjwg Tt Rjpfx Aa Eocd - Flexible part chute - Screw highly wear-resistant - CF drive - Complete documentation and software (on CF card) - German language - Single ownership – origin Germany - Regular maintenance by the manufacturer and previous owner Injection unit: Screw diameter: 40 mm Shot weight: 172 g/PS Injection pressure: 1,530 bar Shot volume: 188 ccm Clamping unit: Clamping force: 70 t / 700 kN Tie bar spacing: 370 x 370 mm Mounting plates: 510 x 510 mm Tool installation height: 200 mm Max. platen distance: 600 mm Ejector stroke / force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 15 kW Heating capacity: 7.7 kW – 5 zones Total connected load: 23 kW Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer's truck or free delivery within Germany (shipping costs apply) Immediately available ex our warehouse in Hanover, Germany Further images to follow Information regarding our machines and company: - We only sell machines which we have acquired from active production, available at our warehouse in Hanover - All offered machines are inspected and tested prior to dismantling - We do NOT sell insolvency goods and we are NOT brokers dealing in third-party property - All offered machines come from successful companies where maintenance and care are understood as a matter of course - All machines offered are available for inspection at our warehouse