Condition: used, Year of construction: 2020, operating hours: 4,200 h, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) Guedpfx Ajv S H N Rjgfoa delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Guedsrbqtnjpfx Agfja Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: used, Year of construction: 2001, operating hours: 60,790 h, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Gsdeh Tk Rvepfx Agfoua Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 1,470 kN, screw diameter: 50 mm, injection pressure: 2,000 bar, opening stroke: 500 mm, overall weight: 7,000 kg, Offered for sale: Krauss Maffei KM 150-1000 C1 injection moulding machine, year 1997, equipped with WITTMANN W711 Cartesian robot for automatic part extraction. Gedpfsyn Ilvox Agfeua Main specifications: Clamping force: 150 tons (≈1470 kN) Model: KM 150-1000 C1 Year of manufacture: 1997 Includes integrated WITTMANN W711 robot The machine is configured for industrial production and features an automatic handling system with a WITTMANN W711 robot, ideal for processes requiring automatic extraction and reduced cycle times. Suitable for manufacturing medium-sized technical parts in PP, PE, ABS, or other common thermoplastics. Available for inspection in Albacete, Spain. Additional technical information and operational video can be provided upon request.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,470 kN, Krauss Maffei KM 150-1000 C1 injection moulding machine from 2003, equipped with a WITTMANN W620 Cartesian robot for automatic part removal. Clamping force: 150 tons (≈1470 kN). This machine is suitable for producing medium-sized technical parts using standard thermoplastic materials such as PP, PE, or ABS. Fully industrial setup with automated system via WITTMANN robot. Gusdpfx Agjyn Im Hjfsa Available for inspection in Albacete (Spain). Additional technical information and operating video can be provided upon request.

Condition: excellent (used), Year of construction: 2014, Engel for silicone Insert 500V/shuttle Godoy Aib Njpfx Agfjua Clamping force 100 tons Year of manufacture 2014

Condition: good (used), Year of construction: 2013, operating hours: 52,398 h, Brand: Dr. Boy GmbH & Co. KG Gusdpoyz T D Eofx Agfja Model: BOY XS Year of manufacture: 2013 Operating hours: 52,398 Screw diameter: 14 mm Max. injection pressure: 2,298 bar Max. shot volume: 6.1 cm³ Clamping force: 10 t Max. distance between tie bars: 160 mm Min. mould height: 100 mm Max. daylight between platens: 250 mm Dimensions: 1,500 x 550 x 1,400 mm Weight: 400 kg Options: • Connected load: 3.0 kW

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total height: 1,960 mm, screw diameter: 53 mm, total width: 1,590 mm, total length: 6,240 mm, injection pressure: 1,700 bar, clamping force: 2,600 kN, YIZUMI UN260SKIII-1000IU(D53) – Injection Moulding Machine Title YIZUMI UN260SKIII Injection Moulding Machine, 260 Ton, 2024, Like New, with Vacuum Loader, Volumetric Doser and Integrated Hot Runner Controller Price EUR 42,000 excl. VAT Description YIZUMI UN260SKIII-1000IU(D53) plastic injection moulding machine for sale. The machine is in like-new condition, with only a few operating hours. It is fully functional and immediately ready for production. Features include a 53 mm C-grade bi-metallic screw and barrel, integrated 4-zone hot runner controller, KEBA i1180 control system, servo drive and pump, automatic mould height adjustment, T-slot platens, by-pass filtration, one set of hydraulic core pulling on both fixed and moving platen with EUROMAP 13 interface, EUROMAP 67 interface and switch, air valve on each platen, water manifold 4 in/4 out on fixed platen, hopper slider with bearings, computer-controlled back pressure regulation, solid-state relay temperature control, and oil cooler water management via ball valve. Sale also includes 1 × Yizumi YA-X800G2 hopper loader and 1 × Yizumi YAM-14MX volumetric doser. Technical Specifications Model: UN260SKIII-1000IU(D53) Machine type: Plastic injection moulding machine Series: SKIII Series, General Purpose Injection Moulding Machine Clamping force: 2600 kN / 260 metric tons Gujdpfx Aoyz Slhsgfea Screw diameter: 53 mm Screw type: C-grade bi-metallic Controller: KEBA i1180 Hot runner controller: Integrated, 4 zones, KEBA, EU14 / 2 kW Voltage: 400V / 3PH / 50Hz Platen type: T-slot drive system: servo motor & pump Automatic mould height adjustment: Yes Core pulling: 1 set on fixed and moving platen, EUROMAP 13 interface Robot interface: Power socket 3ph, 32A, 380V, 5-pole for robot arm Air valve: 1 set on each platen (PF and PM) Water manifold: 1 set, 4 in/4 out on fixed platen Back pressure control: Computer controlled Oil cooler: Water control by ball valve Temperature control: Solid-state relay Packing: Standard export packaging Condition: Like new, few operating hours Year: 2024 Location: Asenovgrad, Bulgaria Price basis: FOB Asenovgrad, Bulgaria, excl. VAT Included in this sale 1 × Yizumi YA-X800G2 hopper loader 1 × Yizumi YAM-14MX volumetric doser Integrated 4-zone hot runner controller Series Features The YIZUMI SKIII series is positioned as a general-purpose servo-hydraulic injection molding machine range, with clamping forces from 900 up to 10,000 kN. According to Yizumi, the SKIII series emphasizes efficiency, energy savings, stability, and enhanced user experience. Official materials also showcase standard T-slots, an upgraded injection unit with linear guide rails, optimized clamping unit design, and an advanced KEBA control system.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, clamping force: 2,600 kN, screw diameter: 60 mm, injection pressure: 1,850 bar, injection weight: 720 g, total length: 6,329 mm, total width: 1,542 mm, total height: 2,071 mm, pressure: 175 bar, closing stroke: 525 mm, Lanson GT3-LS260S – Injection Moulding Machine Title Lanson GT3-LS260S Injection Moulding Machine, 260 Ton, 2024, Excellent Condition, with Vacuum Loader and Doser Price EUR 33,100 Description For sale: Lanson GT3-LS260S plastic injection moulding machine, purchased new in 2024. The machine is in excellent condition, professionally serviced, fully operational, and ready for immediate use in production. Approximate shot count is around 50,000 cycles. The machine features a 60 mm reinforced screw for glass fibre, B type screw, hydraulic safety door, two air blow circuits, and a high-mixing screw. Included in the sale: 1 × WSAL-1.5HP vacuum loader and 1 × VCM-20 masterbatch volumetric doser dispenser. Nameplate verifies model GT3-LS260S with a production date of 2024.09. Technical Specifications Model: GT3-LS260S Machine type: Plastic injection moulding machine Series: GT3-S Clamping force: 2,600 kN Clamping tonnage: approx. 260 ton International size rating: 2600-1462 Screw diameter: 60 mm Screw type: B screw, reinforced screw for glass fibre Screw L/D ratio: 21.0 Shot volume: 792 cm³ Shot weight (PS): 720 g Plasticising capacity (PS): 53.0 g/s Injection pressure: 185 MPa Screw speed: 210 rpm Mould opening stroke: 525 mm Tie bar spacing: 580 × 580 mm Platen size: 875 × 875 mm Minimum mould height: 250 mm Maximum mould height: 630 mm Ejector stroke: 160 mm Ejector force: 67 kN Number of ejectors: 13 Hydraulic system pressure: 17.5 MPa Pump motor power: 32 kW Heater power: 15.4 kW Hydraulic oil tank capacity: 530 L Machine dimensions (L×W×H): 6,329 × 1,542 × 2,071 mm Machine weight: 8.0 ton (according to catalogue) Guedeyz Sfzjpfx Agfja Nameplate weight: 8,200 kg Year: 2024 Condition: Excellent, serviced, ready for operation Included in this sale 1 × WSAL-1.5HP Vacuum Loader 1 × VCM-20 Masterbatch Volumetric Doser Dispenser

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Guedpeyz Sd Dsfx Agfsa Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: like new (used), Year of construction: 2024, functionality: fully functional, clamping force: 900 kN, screw diameter: 35 mm, injection pressure: 1,750 bar, injection weight: 135 g, total length: 4,080 mm, total width: 1,142 mm, total height: 1,874 mm, pressure: 160 bar, closing stroke: 320 mm, Lanson GT3-LS90S – Injection Moulding Machine Title Lanson GT3-LS90S Injection Moulding Machine, 90 Ton, 2024, Excellent Condition, with Vacuum Loader and Doser Price EUR 17,500 Description For sale: 2024 Lanson GT3-LS90S plastic injection moulding machine. Purchased new in 2024, in excellent condition, serviced, fully operational, and ready for immediate production. Estimated production history is approximately 50,000 shots. The machine is fitted with a 35 mm B screw, hydraulic safety door, two sets of air blowers, and a high-mixing screw. Included in the sale: 1 × WSAL-1.5HP vacuum loader and 1 × VCM-20 masterbatch volumetric doser dispenser. Technical Specifications Model: GT3-LS90S Machine Type: Plastic Injection Moulding Machine Series: GT3-S Clamping Force: 900 kN Guedpeyz Sb Nofx Agfea Approximate Clamping Tonnage: 90 ton International Size Rating: 900-262 Screw Diameter: 35 mm Screw Type: B Screw Screw L/D Ratio: 20.1 Shot Volume: 149 cm³ Shot Weight (PS): 135 g Plasticizing Capacity (PS): 21.1 g/s Injection Pressure: 175 MPa Screw Speed: 330 rpm Mould Opening Stroke: 320 mm Tie Bar Spacing: 360 × 360 mm Platen Size: 550 × 550 mm Minimum Mould Height: 185 mm Maximum Mould Height: 385 mm Ejector Stroke: 100 mm Ejector Force: 31 kN Number of Ejectors: 5 Hydraulic System Pressure: 16 MPa Pump Motor Power: 14 kW Heater Power: 6.1 kW Oil Tank Capacity: 220 L Machine Dimensions: 4080 × 1142 × 1874 mm Machine Weight: 3.0 ton Year: 2024 Condition: Excellent, serviced, ready for operation Included in This Sale 1 × WSAL-1.5HP Vacuum Loader 1 × VCM-20 Masterbatch Volumetric Doser Dispenser

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Godpsyyz Ddofx Agfsua Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric

Condition: excellent (used), Year of construction: 2016, Machine designation: VC 330H/200V/80 Combi Gjdpfeyyzzvox Agfeua Clamping unit: Clamping force: 80 tons Opening stroke: 458 mm Ejector stroke: 100 mm Ejector force: 39.8 kN Injection unit 1: Screw diameter: 25 / 30 / 35 / 40 mm Max. swept volume: 79 / / 154 / 201 cm³ Screw speed max: 400 / 425 / 400 / 320 rpm Screw speed max current: 425 rpm Injection rate: 67 / 97 / 132 / 172 cm³/s Injection rate increased: 50 / 71 / 97 / 127 cm³/s Specific injection pressure: 2401 / 2181 / 1595 / 1225 bar Specific injection pressure increased: bar Nozzle stroke: 500 mm Nozzle contact pressure: 48.9 kN Injection unit 2: Screw diameter: 15 / 18 / 22 / 25 mm Max. swept volume: 18 / 25 / 99 / 49 cm³ Screw speed max: 480 / 480 / 480 / 480 rpm Screw speed max current: 480 rpm Injection rate: 37 / 54 / 149 / 104 cm³/s Injection rate increased: 28 / 40 / 98 / 77 cm³/s Specific injection pressure: 2200 / 2200 / 1451 / 1230 bar Specific injection pressure increased: bar Nozzle stroke: 380 mm Nozzle contact pressure: 40.7 kN Type: Multicomponent Drive: Hydraulic

Condition: good (used), Year of construction: 2004, Demag ergotech extra 500-200 (2004) Guodpsyyzuvjfx Agfea

Condition: good (used), Year of construction: 2004, Demag ergotech sys 50-200 (1992) Gsdpsyyztfsfx Agfjua

Condition: used, Year of construction: 2001, Demag ergotech concept 800/420-310 (2001) Gjdpfxeyyzqwj Agfoua

Condition: good (used), Year of construction: 2006, Demag systec 160/520-430 (2010) Gedpfxjyyzpys Agfeua

Condition: good (used), Year of construction: 2003, Demag ergotech extra 800-430 (2003) Gedpfxoyyzi Hs Agfeua

Condition: ready for operation (used), Year of construction: 2008, operating hours: 57,628 h, clamping force: 800 kN, screw diameter: 35 mm, injection weight: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450°C • Tie bar distance: 420 mm • Injection unit: 310 • Control system: CDIAS / NC5 • Total operating hours (SPS): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h Godpoyyyuusfx Agfeua • Total cycle counter: 5,058,031 • Voltage: 400 V • Frequency: 50 Hz • Current: 114 A • Max pressure (Pmax): 235 bar • Max flow (Qmax): 104 l/min • Installation height of the tool: 300 mm • Maximum distance between tool mounting plates: 750 mm • Availability: Mid 2026 Additional equipment • Wittmann linear robot (Handling/Robot) • Gravimax 14R gravimetric blender • TORO-systems material loader

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. Godpeyyyr Tsfx Agfjua • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x)

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,500 kN, screw diameter: 45 mm, injection weight: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 358 cm³ • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450 °C • Max pressure: 190 bar • Max flow (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Year of production: 1999 • Availability: Mid 2026 Additional equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) • X-stroke: 550 mm • Y-stroke: 1200 mm • Z-stroke: 2000 mm • Weight: 300 kg • Wittmann W633 • Robot No: W633 Godpfx Agoyyyn Uofsua • X-stroke: 500 mm • Y-stroke: 1400 mm • Z-stroke: 2000 mm • Weight: 475 kg • Wittmann W743 • Robot No: W743 • X-stroke: 1200 mm • Y-stroke: 2000 mm • Z-stroke: 4000 mm • Weight: 835 kg • Connected load: 18 A / 12.5 kVA • Voltage: 400 V

Year of construction: 2004, condition: ready for operation (used), A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect. Gujdpeyz Anmofx Agfoa

Condition: ready for operation (used), Year of construction: 2003, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C Gjdpfx Agjyyxmvjfsua • Mold opening force: 220 kN • Travel force (moving plate): opening 105 kN / closing 95 kN • Max. opening stroke: 920 mm • Min. mold height: 380 mm • Max. daylight: 1300 mm • Size of mold platens (H x V): 1060 x 1095 mm • Distance between tie bars (H x V): 710 x 710 mm • Ejector stroke: 250 mm • Ejector force (forward/backward): 95 / 49 kN • Max. mold weight: 4950 kg Additional equipment • Handling system: Wittmann with the following robot travel (X/Y/Z): 420 / 1200 / 2000 mm

Condition: ready for operation (used), Year of construction: 2007, clamping force: 8,000 kN, screw diameter: 85 mm, injection weight: 2,452 g, This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection unit: 6100 • Injection volume: 2695 cm³ • Injection pressure: 2242 bar • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450°C • Availability: Early 2027 Additional equipment Gujdpfoyyxc Djx Agfsa • Handling: Wittmann robot system • Model: W743 • Power: 400 V, 18 A / 12.5 kVA • Axes travel: X 1200 mm, Y 2000 mm, Z 4000 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m Gjdpfeyzz Irex Agfoua ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.