Used hydraulic presses double column / four column presses for sale (214)

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) Bjdpfx Ageg Iihwsrsww m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: excellent (used), functionality: fully functional, Manufacturer: MURARO Model: ID500/250 Year: 2001 Condition: Used Stock number: Code 0114 Bwsdpox R U R Ejfx Agrow Maximum upper slide pressure: 500 tons Slide stroke: 900 mm Maximum daylight: 1,500 mm Table size: 2,700 x 1,600 mm Slide dimensions: 2,700 x 1,600 mm Blank holder table size: 2,450 x 1,250 mm Approach speed of slide: 650 mm/sec Blank holder cushion – total force: 250 tons Lower blank holder stroke: 400 mm Overall press height from floor: 5,600 mm

Condition: used, Technical details: pressure: 80 t dayligth: 600 mm Bjdpfx Asu Nfnwogroww ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm Bwodpfjlp U Eujx Agrsw hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Pressing force 300 to Stroke 500 mm Area between the columns 1250x1000 mm Installation height 1000 mm Rapid traverse 22 mm/s Working speed 2 mm/s Motor 7.5 kW Length 2000 mm Width 1500 mm Height 3300 mm 4-column guide Round ram guide Table and ram with T-slots 2-hand operation Bwedpfx Agovgncnsrow Operating instructions Siemens touchscreen control and electric control panel NEW , 50 programs storable, for programming of: - Upstroke and downstroke rate - Pause time in the floor - Decompression time - Setting the working pressure - Piece counter - Prestop in upward and downward movement - Setting for manual and automatic movement - Management of alarms and anomalies

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 20 t, Double column press 20 T capacity, a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Bedpjhmbhqsfx Agrjww Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 20 kN Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Size 1100x850 mm Speeds Fast closing with 9 mm sec. Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW

Condition: excellent (used), Year of construction: 2000, Manufacturer EMANUEL Model DEA 800 Year 2000 Condition Used Warehouse number Cod.0337 Bsdpfx Aowiidwogrsww Power 800 tons Slide stroke 900 mm Approach speed mm/sec 400 mm Working speed at 100% mm/sec 15 mm Working speed at 50% mm/sec 31 Slide return speed mm/sec 400 mm Max. vertical clearance 1,500 mm Mold holder table size 2,500 x 1,500 mm Blankholder table size 2,380 x 970 mm Blankholder cushion - total force (ton) 600 tons Lower blankholder stroke 450 mm.

Condition: used, Year of construction: 1992, pressure 300 t passage width 1350 mm stroke 500 mm column travel -side 830 mm table surface area 1350x1380 (1870x1380) mm table height 1060 mm total power requirement 45 kW weight of the machine ca. 20 t dimensions of the machine ca. BxTxH 2500x2000x3950 mm Bedpfx Aovn U Sregroww

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke Bsdpfxjw A Amrs Agreww - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: new, Year of construction: 2024, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, installation height: 400 mm, Equipment: safety light barrier, EXNER hydraulic double column press EX SLL 40 new machines year of construction 2024 pressing force: 400 kN Bwsdpfeuv Hm Iex Agrew Installation height: 400/450 mm stroke: 250 mm Table (width) 700 mm Table (depth) 450 mm

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 135 t, It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm Bwedpsigg E Hjfx Agrew 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm weight 2,3 T 200 L tank Pump with 60 L capacity 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control system PILZ Communication operator/press Color touch screen 10" OMRON/SIEMENS

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l Bwodpfefxyirox Agrjw pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Bodeuqdi Uspfx Agrsww Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press Bwedpfef A R Uhox Agrjw H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Year of construction: 1984, condition: used, pressure 100 t distance between columns 1000 mm stroke 150 mm table surface area 1000 x 700 mm distance table/ram 500 mm die cushion stroke 180 mm ram surface 1000 x 700 mm ram drills x depth 50 mm no. of strokes 85 Hub/min tool shank hole (depth x diameter) 85 x 50 mm clamping slots 22 DIN 650 form diagonal number of clamping slots 2 sheet width 400 mm plate length 1000 mm dimensions of the machine ca. 3,0 x 3,0 x 3,0 m weight of the machine ca. 8 t total power requirement 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders Bedofn Apzspfx Agreww - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped

Year of construction: 1984, condition: refurbished (used), PRESSURE 200t Bwedpfx Agodzp Ezjrsw TABLE UP/DOWN 1130x860mm STROKE 250mm DAYLIGHT 500mm

Condition: excellent (used), Year of construction: 2001, Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Bwedpohfwqzjfx Agrew Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, SCHOEN 250t TYPE 6400 PRESSURE: 250t STROKE: 420mm Bwjdpsq A H H Hofx Agrow TABLE DIMENSIONS: 2050x1730mm HIGH ACCURACY HYDRAULIC PRESS

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Stroke (mm): 1000 mm Daylight (mm): 1400 mm Advance Speed (mm/sec): 1400 mm/sec Return Speed (mm/sec): 200 mm/sec Working Speed (mm/sec): 2–12 mm/sec Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg Bodpewbtn Rjfx Agrjww

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Bwodoguvtlepfx Agrew Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm table surface area 470x400 mm Bodpfxjlp Uz Uo Agroww weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm Bedpfxslp U A Ij Agrjww table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Bjdpjuqd Nujfx Agreww Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 2019, pressing force: 250 t, pressure:250 t passage width:2500 mm stroke:500 mm total power requirement:60 kW weight of the machine ca.:39 t dimensions:2720 x 3750 x 4350 mm return capacity:25 t max. working heidht:800 mm Table dimensions:3090 x 1500 mm :3090 x 1500 mm table height over floor:1000 mm pre-running speed:400 mm/sec pressure speed:bei 125 t, 50 mm/sec Return Speed:400 mm/sec speed rapid traverse:400 mm/sec :1500 l Oil cooling (electric):3 kW (max) Vibration damper plates:je 450x450x85 mm pressure:250 t bei 220 bar t/bar pump capacity:176 Lt./min :46er / 10 my Hydraulics from Bosch Rexroth or other German manufacturers :Parker, Hydac Bsdjd Nq Idspfx Agrjww :inklusive Light Barriers from Schmersal/Pilz:Pilz Monitor:Omron 12 Zoll

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Bwsdedzp Tcepfx Agrew Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.