Used eccentric presses single column 55-99t for sale (122)

Condition: used, pressure 63 t throat 315 mm stroke 16 - 125 mm max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min table surface area 800 x 630 mm ram surface 500 x 400 mm Hodpfetqm Dqex Ahvjfd total power requirement 6 kW weight of the machine ca. 5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t Hsdpfsdlcy Hjx Ahvefd dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission Hjdpfxjtycdkj Ahvsfd - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: good (used), Year of construction: 1960, machine/vehicle number: P4461960, Offer 25471 Technical Data: - Pressing force: 75 t - Throat depth approx.: 300 mm - Table size approx.: 800 x 600 mm - Height-adjustable table - Stroke adjustment approx.: 16 - 140 mm - Ram adjustment: 80 mm - Strokes per minute: 80 - Pneumatic connection - Drive: 400 V - Space required approx.: W 1800 x H 2450 x D 2000 mm Hodpfx Ahexxwc Revefd - Weight approx.: 4000 kg

Condition: like new (used), functionality: fully functional, COFMO punching press, type KD 2128, capacity 63 tons, table 800x560 mm, ram 450x320 mm, stroke 10/100 mm, variable speed from 60 to 160 strokes per minute, ram adjustment 80 mm. Machine supplied with certificate of conformity and complete documentation. Can be inspected in good working condition. Hedpfoxxrvfex Ahvjfd

Condition: new, Year of construction: 2025, functionality: fully functional, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, pressing force: 60 t, C-frame eccentric press 60 t. NEW Press force: 60 t Hfodpfsxtpltsx Ahvod Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Speed: 60 SPM Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Table hole diameter: 150 mm Table height above floor: 795 mm Weight approx. 5,000 kg Height: 2,430 mm Depth: 1,370 mm Width: 1,265 mm Motor: 5.5 kW

Year of construction: 1993, condition: reconditioned (used), TECHNICAL FEATURES: Press Model: T80 FNAR Serial number: 8932 Year of construction: 1993 Nominal force: kN 800 Weight: Kg. 5.000 Nominal number of strokes: 60 min. Operating air pressure: BAR 5.5÷6 Installed power: 4 kW Max stroke: mm.100 Hjdpfok Rbyksx Ahvsfd Hammer adjustment: mm.60 Stop position: P.M.S Voltage: V 380 Frequency :50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Pedal board; • Two-hand command; • Safety valve; • Accident prevention guards with safety keys

Condition: good (used), throat depth: 400 mm, ram adjustment: 80 mm, pressing force: 80 t, Capacity: 80 Ton Table surface: 750 x 550 mm Ram Adjustment: 80 mm Hodpfxeugtkxo Ahvefd Stroke length: 8 -112 mm No. of strokes: 78 p/min. Throat: 400 mm Complete with: - Pneumatic clutch - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t Hfedpob Tdquefx Ahvjd throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Höhe 3.600 Breite 1.660 Hodpfxoiuxwqe Ahvjfd Tiefe 2.400 Gewicht 12.100 kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories Hfedefx Hv Hepfx Ahvjd

Condition: good (used), Year of construction: 1984, functionality: fully functional, pressing force: 63 t, Band saw LEN63C Hodpfeu Nkfuex Ahvofd

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: A5137, Refurbished 100-ton HEILBRONN C-press, currently undergoing retrofitting - available at short notice. Hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc., new control system (adjustments still possible). Dimensions - see machine drawing as PDF. Technical specifications: Press force: 1,000 kN Speed: 50 rpm (variable speed optional) Variable stroke: 14 - 150 mm Ram adjustment: 80 mm Installation height: 420 mm (max. stroke at bottom, adjustment at top) Table: 650 x 500 mm Hedewb A Dzspfx Ahvjfd Ram: 400 x 250 mm Thrust: 350 mm Drive power: 5.5 kW Approx. weight: 5,500 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum tool installation height: 355 mm Hedov U Nm Dspfx Ahvjfd Mold upper part weight: 250 kg MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: used, Year of construction: 1979, pressure:64 t throat:315 mm stroke:8-100 mm no. of strokes:140 Hub/min table surface area:820 x 630 mm table height over floor:800 mm ram stroke - adjustable min/max:8-100 mm ram - range of adjustment:63 mm total power requirement:7,5 kW weight of the machine ca.:4,8 t Hodpfx Aecxxmfehvofd dimensions of the machine ca.:1,45 x 1,70 x 3,10 m

Condition: used, Year of construction: 1967, pressure:80 t throat:280 mm stroke:20-120 mm Hfjdpfx Ahscxxrhoved table width:710 mm table depth:560 mm ram head dimension:560x355 mm ram adjustment:72 mm no. of strokes:125 Hub/min total power requirement:9,5 kW weight of the machine ca.:4,4 t

Condition: used, pressure:70 t throat:250 mm stroke:10 - 120 mm table-size:750 x 500 mm dayligth:350 mm ram adjustment:350 x 200 mm no. of strokes:50 Hub/min daylight:310 x 370 mm total power requirement:5 kW Hjdpfx Ahjcxxttevofd weight of the machine ca.:3,5 t dimensions of the machine ca.:1,3 x 1,4 x 2,5 m tilting eccentric press, tie-rod design with UVV movable protective screen, pneumatic clutch, quadruple led tappet, separate electric cabinet, central lubrication, electric two-hand operation, emergency cut-off

Condition: used, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Stroke adjustment from 10-140 mm Ram adjustment 80 mm Hfsdpfx Ahsv T Dapsvod Stroke rate 50 /min.

Condition: good (used), Year of construction: 1987, functionality: fully functional, ram adjustment: 80 mm, total height: 24,100 mm, table width: 600 mm, table length: 800 mm, total width: 18,300 mm, total length: 20,400 mm, overall weight: 4,650 kg, pressing force: 75 t, To be viewed under power. Hsderr Sybjpfx Ahvjfd

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm Hodpfocxxx Hsx Ahvefd stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: good (used), Year of construction: 1962, machine/vehicle number: 5601062, Offer 24287 Technical data: Hjdpfsu Ilkijx Ahvefd - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Drop-through hole in table approx. 300 x 200 mm - Maximum installation height approx. 360 mm - Plunger surface approx. 340 x 160 mm - Pivot hole in plunger 40 mm - Plunger adjustment 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - Rotary wedge clutch - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 3500 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 54796/14A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum mold height: 355 mm Mold upper section weight: 250 kg Mold height at bottom of cylinder: 355 mm MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Hedpjv I Uwuefx Ahvefd Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm