Used drilling and milling for sale (97)

Year of construction: 1975, condition: used, Manufacturer: DABROWSKA Type: BORING ROTATED TABLE & X AXIS Isdpsb Ufgmofx Ahvjtd Technical characteristics: TABLE DIMENSIONS 1600x1600mm Stroke: 1500mm ON AXIS

Year of construction: 2011, operating hours: 8,000 h, condition: good (used), machine/vehicle number: 041-045, AUERBACH drilling and milling machine, model AX3 TLF, 2011, in good condition. Photos, dimensions, nameplate attached in the photos. Technical parameters: Longitudinal travel (X axis) table: 1600 mm Cross travel (Z axis) column: 700 mm Cross travel (W axis) drilling head: 1300 mm Vertical travel (Y axis) of the drilling head: 800-1200 mm Rotation axes: - B axis rotary table: 360 degrees - A axis drilling head: -25 to +15 degrees Ijdpfx Ahsg N Tb Novstd Drilling range - deep drilling: Diameter range: 3 - 32 mm Drilling depths in one pass: 1300 mm Maximum possible drilling depth: 1700 mm Main drive / deep drilling module: Nominal drive power: 12 / 18.5 kW Speed range: 60 - 8000 RPM Spindle torque: 115 Nm Feed drive: Feed speed: 1 - 15 (in the Y 1-10 axis) m / min rapid feed speed in all axes: 15 (Y axis 10) m / min Machine dimensions / installation site: Weight - main machine kg 12000 Installation site size: - Width: 5500 mm - Depth: 5300 mm - Height: 3400 mm Location: Kopalniana 72 Tarnowskie Góry, Poland

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Itsdpfow Sx Agex Ahvsd

Condition: new, bore capacity in steel (diameter) 25 mm throat 170 mm bore stroke 50 mm 16 mm spindle taper MK 3 spindle turning speed range 50 - 3000 U/min 280 mm 155 mm table surface area 500 x 180 mm Itjdpsvdldwefx Ahved connected load frequency 230 V max. distance between table and spindle-nose max. 320 mm total power requirement 0,8 kW weight of the machine ca. 150 Kg dimensions of the machine ca. 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 Isdpfxsu Aq Ame Ahvotd - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: new, bore capacity in steel (diameter) 16 mm throat 170 mm bore stroke 50 mm 16 mm spindle taper MK2 spindle turning speed range 50 - 2250 U/min 320 mm 145 mm table surface area 500 x 140 mm connected load frequency 230 V total power requirement 0,5 kW Iodpfx Aheupxmrevstd weight of the machine ca. 90 Kg dimensions of the machine ca. 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!

Condition: new, Year of construction: 2024, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Isdpfefu Ivzox Ahvstd Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm Itodpfx Aoupxcyshvjd 100 mm table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 25 mm throat 175 mm bore stroke 50 mm 16 mm spindle taper MK 3 spindle turning speed range 50 - 3000 U/min 380 mm 175 mm table surface area 700 x 180 mm connected load frequency 230 V Itjdeupxtfspfx Ahvod max. distance between table and spindle-nose max. 320 mm total power requirement 0,75 kW weight of the machine ca. 150 Kg dimensions of the machine ca. 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools

Condition: new, bore capacity in steel (diameter) 30 mm throat 200 mm bore stroke 70 mm 16 mm spindle taper MK3 spindle turning speed range 50 - 3000 U/min 565 mm 220 mm table surface area 840 x 210 mm connected load frequency 400 V max. distance between table and spindle-nose max. 470 mm total power requirement 1,1 kW weight of the machine ca. 230 Kg dimensions of the machine ca. 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Ijdjupxt Eopfx Ahvetd Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand otional ( 199 Euro) incl. tool box with various tools

Condition: used, Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm Isdsut Uzajpfx Ahvetd - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: used, Kolb Pillar Drill for Iron Iedpfx Aowb Hcushvstd

Condition: new, bore capacity in steel (diameter) 50 mm throat 360 mm bore stroke 150 mm spindle turning speed range 120 - 3000 U/min spindle taper SK 40 650 mm 320 mm vertical adjustment 500 mm table surface area 1000 x 300 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 2,2 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Isdpfx Ahsfg U S Ujvetd Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm Itedpjfv H Hujfx Ahvsd • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 730 x 210 mm connected load frequency 400 V boring feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support Itodpfxsupw T De Ahvsd - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm Itjdpjupxrnefx Ahvod table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Itjdpfjwc Ryaex Ahvjd Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Cooling system Internal cooling through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Spindle runtime: 11,428 Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling - Continuously rotating rotary table - No chip conveyor

Condition: new, bore capacity in steel (diameter) 35 mm throat 230 mm bore stroke 125 mm spindle taper ISO 40 spindle turning speed range 115 - 1750 U/min 560 mm 175 mm table surface area 1000 x 240 mm max. distance between table and spindle-nose 375 mm connected load frequency 400 V total power requirement 0,85/1,5 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,3 x 1,2 x 2,1 m Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Iodpfx Aou Imkdshvetd Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 115 mm spindle taper SK 40 Iodpfx Aef Nb E Hohvstd spindle turning speed range 70 - 3200 U/min 350 mm 130 mm table surface area 590 x 190 mm connected load frequency 400 V diameter of hob max. 80 mm feed 0,1 - 0,18 - 0,26 mm/U total power requirement 1,1 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,7 x 0,95 x 1,75 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 520 mm 230 mm table surface area 730 x 210 mm connected load frequency 400 V total power requirement 1,1/1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge Ijdpfx Ahefv H Hqsvotd • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm Iedjupw Uzspfx Ahvjtd 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 16 mm throat 185 mm bore stroke 50 mm 20 mm Itjdpourznwjfx Ahved spindle taper MK 2 spindle diameter mm spindle turning speed range 100-1500 / 200-3000 U/min 175 mm 280 mm table surface area 500 x 180 mm connected load frequency 230 V total power requirement 0,85 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 0,86 x 0,6 x 0,9 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank