Used Spit 352 for sale (1,366)

Condition: used, Display unit Condition: Like new Dodpfx Aev Ntb Ieb Tjcr Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: ready for operation (used), From 2004. Belt is 25 cm wide. Complete and ready to be used. Dedevrqy Hepfx Ab Tocr

Condition: good (used), functionality: fully functional, Year of construction: 2004, operating hours: 6,700 h, load capacity: 8,000 kg, fuel type: gas, motor manufacturer: Perkins, DGUV certified until: 07/2026, empty load weight: 12,500 kg, total height: 3,800 mm, Linde H80T in good condition for sale as shown in the photos. Only 6700 operating hours, verifiable! This is one of the last models without extensive electronics, etc. (Perkins engine). - Load capacity: 8,000 kg - Own weight: 12,540 kg - 3rd and 4th hydraulic circuits up to the fork carriage available - Valid UVV inspection sticker - Year of manufacture: 2004 - Overall height approx. 380 cm (Mast can be tilted forward for transport or fully dismantled as agreed) Dcodow Eyb Sspfx Ab Tor Please feel free to contact us anytime with any questions.

Condition: ready for operation (used), Süd - Electric fan motor type EL 352, 110 V, 2.4 A, 50 Hz, serial number: 606272, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. Djdjx Dwdxjpfx Ab Tjcr

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG60SB-13594, total width: 4,030 mm, total length: 7,000 mm, overall weight: 2,500 kg, input current: 11 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 3,300 mm, feed length Y-axis: 6,100 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Bottero float cutting table (shapes) 2-19mm, max cutting size L6100x3300mm Dimensions: L7000xW4030mm, weight +/-2500Kg Dodpfx Aboxrmpmo Tecr

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Dcsdpoxx Sfaofx Ab Tsr Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING

Condition: used, functionality: unexamined, Year of construction: 2003, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, type plate available, Lasag Laser FLS 352 N / BAK 4 * used, MFD 2001 * av. laser power: 300 W * max. pulse power: 20 kW * max. pulse energy: 60 J * wavelength: 1064 nm Dcsdpfx Abjxxbrvs Tjr * incl. documentation (German)

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Dedpfx Ajl Tn Epjb Tjcr

Condition: good (used), power: 317 kW (431.00 HP), fuel type: diesel, color: yellow, Year of construction: 2016, operating hours: 8,670 h, Equipment: air conditioning, Technical information Djdpexuz H Ssfx Ab Tocr Track width: 75 cm Empty weight: 60.480 kg Make of engine: C13 Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT0352FTSD200228 Other information EPA Marked: yes Dipper / stick length: 1700 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 16,4x3,7x3,65 Production country: BE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: like new (used), Year of construction: 2011, operating hours: 250 h, machine/vehicle number: 02573550-060, Used Diesel Generator – Cummins | 352 HP / 263 kW Standby | Enclosed | With Fuel Tank Technical Specifications: Engine Brand: Cummins Engine Model: QSL9-G5 Standby Power: 352 HP / 263 kW at 1800 rpm Prime Power: ~310 HP / 231 kW at 1500 rpm Voltage: 400/231 V Frequency: 50 Hz RPM: 1500 Fuel Type: Diesel Cooling: Liquid-cooled Control Panel: Included Fuel Tank: Integrated base frame fuel tank (visible on photos) Dsdewzirxspfx Ab Tecr Condition: Used – very good visual and operational condition Soundproof Enclosure: Yes Manufacturing Label: Frame code 4A9A145639

Condition: used, Second hand Automatic shape glass cutting table (Regular), Bottero Type 352 BCS - R, Year 2006 Dedpfx Asxpibmjb Tocr

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. Dedpfxjxx Scls Ab Tocr - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: new, Year of construction: 2025, CAT345/349/350/352 General Purpose Bucket from stock Djdpfxjwy Dnxo Ab Tocr

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway Djdpfx Abexdr Rts Tscr - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW Dcsdpfxsfmck Ho Ab Tor weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts Optional base frame 361 euros

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 1 x 80 mm Dcedpfxoxabnmj Ab Tjr capacity 45 degrees: round 100 mm links capacity 45 degrees: round 75 mm rechts

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm Dsdpfx Absxx R Nqs Tecr - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray Dodpfjfg Rlbsx Ab Tecr •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: round 110 mm capacity 60 degrees: round .0 mm capacity degrees: square 95 x 95 mm capacity degrees: square 95 x 95 mm capacity 60 degrees: square x mm capacity degrees: flat 180 x 95 mm Djdpfx Abjxabd Ij Tscr capacity degrees: flat 125 x 95 mm capacity 60 degrees: flat x mm

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,285 t dimensions 1,2 x 1,4 x 1,4 m Dcedjfc T Ugepfx Ab Tor Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Dcsdpfx Absfgpdle Ter Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Dcodpfofg Rlcox Ab Ter Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 10/95 mm capacity 45 degrees: flat 135x60 mm engine 2,5 0 1700 / 3400 U/min weight of the machine ca. 600 kg dimensions 2,0 x 1,5 x 1,7 m Dcedpfx Ajfg Rlgeb Ter COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, for sawing of aluminum and light metal alloys for the use of HM circular saw blades. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw machines with the new one specially designed by MEP for Automatic machines developed, Windows “CE” based control

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. Dedpfx Abefc T Ufs Tocr •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm

Condition: new, weight max. in kg 3500 kg stroke 4,8 mm fork length 1200 mm battery 80V/280AH Li-ion weight of the machine ca. 5,0 t dimensions of the machine ca. 3,94 x 1,23 x 2,25 m Dsdeiunmiepfx Ab Tecr New EP EFL 352 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 3500 kg Headroom of 2.25 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift.