Drilling and milling machine

IXION-MAXION KT 2-1300.1GL

Condition: good (used), Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm Giodpfx Agjur H Ehobjl - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: used, Year of construction: 1987, Column Drilling Machine Manufacturer: ALZMETALL Model: AB 3/ES Gedpfxsw Id Uaj Agbsil Year of manufacture: 1987 - workshop tested Machine no.: 23348 Standard features: - Infinitely variable speed control from 260 to 3,500 rpm - Analog speed display - Operating manual Other important technical data: - 28 mm drilling capacity in ST 60 - 160 mm quill travel - Spindle taper MK 3 - 115 mm column diameter - 500 x 300 mm table dimensions

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Giodpfoxa Eudox Agbjl Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm Giedpfxogv I Une Agbsl T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Gedpfx Agjd E A I Ieboil Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display Gijdpfxsb Eldne Agbel machine in stock and immediately available

Condition: used, Year of construction: 2010, travel distance X-axis: 1,800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 1,500 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 1,800 rpm, overall weight: 14,000 kg, - Heidenhain iTNC 530 control - 5 axes - Fixed table with integrated rotary table, diameter 750mm (500kg) - CTS (coolant through spindle) 40 bar - 60-tool changer (SK 40) - Milling head with B-axis Giedpox Ni Ezjfx Agbsl - Chip conveyor - Spray gun - 3D Quick Set - BLUM laser measuring system - Direct measuring system - 2 rotary clean windows Table clamping area: 2100 x 700 mm Spindle taper ISO: SK 40 Spindle drive: 35 / 25 kW Rapid traverse: 40 m/min Tool changer capacity: 60 positions Space requirement approx. 5.5 x 3.5 x 2.7 m

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter over bed slide: 560 mm, turning diameter over top slide: 356 mm, center height: 280 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, type of input current: three-phase, three-jaw chuck diameter: 320 mm, Centre length ----- 1500 mm Centre height ----- 280 mm Swing diameter ----- 560 mm Main spindle bore ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 kW INCLUDES Giodpfx Asga Tvlsgbel * 3-axis digital readout by SINO * Multifix quick change tool post type TOOC3 with 4 tool holders * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Face plate * Fixed and travelling steady rest * LED work light * Coolant system * Box with various tools

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode Gisdpferb Afasx Agbsl - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod Giodpogpxc Sofx Agbol - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet