Drilling and Milling M/C

KAMI FKM 350 PD / SK40

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. Hsdpfxofv H Huj Aahep

Condition: used, Technical specifications: X-axis travel: 700 mm Hodpfx Aaextnn Tehsp Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Hedpoyll A Tofx Aahop Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: new, Precise, smooth-running standard drilling machine, high accuracy and quality. Drilling table adjustable via rack and pinion and pivotable around the column. Full motor protection, star handle. Mains connection 230 V. Continuous drilling capacity in St 60 steel: 15 mm Normal drilling capacity: 18 mm Spindle speeds, stepless: 200 - 4,000 rpm Spindle: MK 2 Drilling depth: 80 mm Overhang: 180 mm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor with frequency control: 1.1 kW Equipment: - Reversing switch for right/left rotation for thread cutting - Full motor protection - Star handle Hsdpfx Aaeda Nqxohjp In stock, immediately available

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm Hjdpetzf N Rofx Aahop -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: Hsdpfx Aaew Rlvqehsp - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Year: 2003 Controller Cabinet: KRC2 Hsdpfshakfasx Aahsp Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm range of turning diam 460-1250mm Hsdpfek Dz N Iox Aahjp

Year of construction: 1990, condition: ready for operation (used), Control: Deckel Dialog 11, with vice, an inspection is possible. Hedpoqi D S Usfx Aahop

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Hjdpfx Aaopgmryehep Are you also looking for a crane system?