Used deephole boring machines for sale (73)

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. Iodpfxot Hwucs Aa Esid * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm bore depth 320 mm Iedpfx Aast Hwvas Esid swing diameter mm total power requirement 33 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: excellent (used), bore depth 500 mm spindle speed: 1 Iiedpfx Ajxx A D Toa Eod

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Iodpfxet Hw Aye Aa Esid Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 1996, general overhaul in 2005 Number of spindles: 2 Drilling capacity/spindle, steel: 1-6 mm Drilling depth: max. 350 mm Z-axis travel: 350 mm X-axis travel: 350 mm Drive power/spindle: - 100% duty cycle 3.7 kW - 50% duty cycle 5.5 kW Spindle speed: 3,000 - 27,000 1/min Spindle mounting: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow: 48 l/min Coolant volume: 1,000 l Compact band filter High-pressure pump Accessories included: - 29 drilling sleeves - Drilling sleeve holder - Taper chucks Iisdoy Eykgjpfx Aa Ejd - Tapers - Drill chucks Optional accessories - € 5,500 - 137 drills - List available in PDF

Condition: good (used), Year of construction: 2013, operating hours: 44,789 h, machine/vehicle number: 68023, drilling depth: 2,000 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,250 mm, SN: 68023, working area X/Y/Z 1,250 x 1,250 mm, W-axis (drilling and milling unit, horizontal) 2,000 mm, A-axis (drilling and milling unit, swiveling) -25° to +15°, B-axis (rotary table) 360°, table load 15,000 kg, with reference plate, manufacturer Pfleghar, 6-part, overall dimensions 1,800 x 1,800 x 40 mm, grid 50 M16 Ø 24, consisting of 3x type TF-600 x 800 x 40 and 3x type TF 1,000 x 600 x 40, max. drilling depth 1,800 mm, drilling diameter 5-50 mm, machine weight 48,000 kg, pit-mounted, tool holder SK50, tool changing system, exchange magazine, 24 slots, control system, manufacturer Heidenhain, released BS control system version 73.247, machine operating hours 44,789. The price is quoted as a net ex-works price. Dismantling, lifting and loading will be carried out at the buyer's expense and risk. Iijdpfxezld Uge Aa Esd

Condition: used, Year of construction: 1997, Mollart Machine Tools 3 Axis, Knee Type Omnisprint Gun Drilling Machine with GE Fanuc Series 18 - M CNC Control, Twin Spindle Z Axis, Max Gun Drill size 22mm x 1000mm, FSE Swarf Management System with 1250l Oil Tank, Paper Roll Clarifier Filter and Swarf Conveyor, Fanuc Drill Spindle Motor. S/No. A270 - 0397 (1997). Country of Origin: United Kingdom Iiedpfx Aezi Tqloa Ejd Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 7,000 kg, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 2,000 mm, spindle speed (min.): 6,000 rpm, drill diameter: 32 mm, 24-POSITION TOOL CHANGER Isdjzi Eqdepfx Aa Eoid TABLE: 1000 X 1500 MM CNC MITSUBISHI 530

Condition: like new (used), Year of construction: 2022, functionality: fully functional, drilling depth: 1,250 mm, feed length X-axis: 1,700 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, workpiece weight (max.): 6,000 kg, travel distance X-axis: 1,700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 4,200 rpm, drilling capacity: 30 mm, Equipment: rotational speed infinitely variable, - HEIDENHAIN TNC 620 control unit - Electronic handwheel - Table dimensions: 1000 x 1000 mm - Manual table changing system with ZERO POINT table - Table rotation around B-axis: 360,000 positions/revolution - Table tilt around A-axis: +/- 22.5° Iisdpfx Aezixyrea Eod - Deep-hole drilling spindle: 11 kW / 6000 RPM - Milling spindle: ISO 40 / 13 kW / 6000 RPM - Tool changer: ISO 40, 24 positions - Smoke extraction system: AR FILTRAZIONI - CE marking

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Iodpfx Ajwcldaja Ejid For more technical details please look at the photos

Condition: good (used), Tools , drills will come without tool cabinet . Tool trolley with toolholders will come. Isdpfx Aaozd D N Is Eoid

Condition: excellent (used), Year of construction: 2019, drilling depth: 3,000 mm, total length: 11,500 mm, total width: 4,300 mm, total height: 2,350 mm, rotational speed (max.): 1,800 rpm, spindle motor power: 44,000 W, Deep hole drilling machine Tacchi - FT 350 x 3000 MACH-ID 9650 Make: Tacchi Type: FT 350 x 3000 Control: SIEMENS 840D Year: 2019 High precision accuarcy ( two step proces) 1e step  cutting using skiving knives 2 step cold-form rollers for highest surface toleraces For Superfinishing Hydraulic and Pneumatic Cylinders / Rods ECOROL Boring heads in diameter: 40/50/63/80/90/100 mm Maximum out side diameter 250 mm Swing over bed 700 Center height 350 mm Drilling carriage Rapid feed rate both directions 6000 mm/Min Max. Drilling thrust 35000 N Feeder carriage Rapid movement 5000 mm/Min Thrust against workpiece 35.000 N Hydraulic approach stroke 150 mm Max. drill Ø steel:200mm Spindle bore: 85mm Drilling depth: 3000mm Power on spindle: 44kW Speeds / ranges: 1800Rpm Length: 11500mm Width: 4300mm Height: 2350mm Weight: 14450kg Ijdpfozdq Ecjx Aa Eoid Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 2,030 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 1,700 mm, table length: 2,200 mm, table width: 1,800 mm, table load: 12,000 kg, Deep hole drilling machine Ixion (drilling depth 1500mm, X 2030mm, Y 1800mm, Z 1700mm) Iisdpfx Aey Rhzwea Esd The base machine is a PEGARD drilling machine AF 13 (year of manufacture 1976, machine weight approx. 32 t) 1996: Retrofit and conversion to a deep hole boring machine (the conversion was carried out by ROTTLER Maschinenbau GmbH - Mudersbach) 2024: Overhaul (spindle bearings renewed, drill bushing holder/coolant supply disassembled and cleaned, hydraulics for tool clamping repaired, coolant system and hydraulic unit cleaned and inspected, etc.) Working ranges: - X-axis (longitudinal) 2030mm - Y-axis (drilling unit vertical) 1800mm - Z-axis 1700mm - Drilling depth in one operation 1500mm - B-axis (rotary table) 0-360° Drilling unit: - Main spindle ISO40 - Spindle speed 60-6000 rpm - Drive power at 100% ED 7.5kW NC rotary table (B-axis) - Table surface 2200x1800mm - Rotary axis 0-360° - Max. table load 12,000kg - Positioning accuracy +/-15 sec Coolant system/chip conveyor - Tank size approx. 1000l - Coolant pressure max. 80 bar - Flow rate max. 46 l/min - Paper band filter - Scraper conveyor/chip conveyor CNC control - Mitsubishi M325 with 14" color screen - Integrated tool breakage monitoring by querying the torque of the main spindle - Real-time process variable visualization of torque - Deep hole drilling technology programs - Portable electronic handwheel

Condition: ready for operation (used), Year of construction: 2014, Machine type Deep hole drilling machine Manufacturer TBT TIEFBOHRTECHNIK Type ML 250-2-850 Year of manufacture 2014 Condition Used Control type CNC Control system SIEMENS Location Factory location Control system SIEMENS Drilling diameter Iodeza Arnjpfx Aa Esid Ø 3 - 25 (18) mm Speed 1000 - 6100 RPM Drill slide stroke 850 mm Drilling depth 550 mm Spindle distance 240 mm Dimensions L x W x H approx. 6 x 5 x 2.3 m Shipping weight approx. 6000 kg Shipping size approx. 10 loading meters

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. Ijdpfxsu Id H Aj Aa Eoid CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm - Drilling depth: 750 mm - Filter Iiodpfx Ajxzz Hsa Eed - Pump

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Isdpfx Aeyilgdoa Esid Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Iiodpfex Tp Ahjx Aa Ejd Type: UTB Year: 2005

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Iijdpfx Asv A Uw Dea Esd Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm Ijdpfx Asvn Sv Uea Ejid W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Max Boring Length 4000mm Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Iodpfxsxzp Rls Aa Esid Max boring length if using the 500mm hollow spindle 4000mm

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, Iiodow U Uhkopfx Aa Ejd 4 off Steady Rests 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation

Condition: excellent (used), Year of construction: 1985, Drilling depth 750 mm Solid drilling in steel approx. 30 mm Maximum spindle speed 5,700 rpm Iodpey N Ecpsfx Aa Ejid Clamping table 1280 x 420 mm Cross-slide table Coolant tank Various accessories (drills, bushings)

Condition: excellent (used), Drilling capacity -16mm Iijdpjq Dlznofx Aa Eed MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Marcels Maschinen AG

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Isdpfx Aaovca Rcj Esid Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided