Used Tbt for sale (24)

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Nksdpfx Aow Ekfujhvsw Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, Nksdjw Agqhspfx Ahvow and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2012, operating hours: 79,000 h, functionality: fully functional, machine/vehicle number: 106648-11, Please provide your offer price. Sales only within Europe, including Turkey. Price excluding packaging; delivery condition: FCA (machine location). Available machines: 5 units, identical process. Year of manufacture: 2001 - 2012 ===== For technical data, please refer to the handout. All warranty rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sale to private individuals. Nedpfxsxzgras Ahvskw

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed Nkedev A Uw Djpfx Ahvew 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Nksdsylbrqepfx Ahvow

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Nodpfxjyfhcis Ahvokw

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm Nkedpfx Aehuil Rohvsw -Tailstock -Tank -pump -Filter

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter 5-30 mm - Drilling depth 750 mm - Filter Nsdpfx Ahoxzz Hsvokw - Pump

Condition: ready for operation (used), Drilling diameter 5 ~ 25 mm Drilling depth 1000 mm Headstock Njdpfodgpltjx Ahvjkw Tank pump Filter

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -drilling diameter ~30 Nkjdpfxsd Ri H Ee Ahvew -drilling depth 750/extension ~1000 -Tank -Pumps -loading equipment -Tailstock

Condition: good (used), -Drill through fair 5-30 mm - depth 750 ~ 900 mm - conversion to customer specification Nodpfe Dcz Dex Ahvskw

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions Nkodovca Rcspfx Ahvew L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed (min): 50 rpm Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Nedpfx Aexm S Idehvskw Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW EQUIPMENT 3-axis Heidenhain digital readout Coolant system

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Nsdpst Hw Ayefx Ahvskw Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1990, core drilling diameter max. 6 mm bore depth 350 mm Nksdst Hw A Topfx Ahvew swing diameter mm total power requirement 15 kW weight of the machine ca. 3500 kg dimensions of the machine ca. 5000 x 1200 x 2200 mm

Condition: used, Deep driller TBT T30-3-500 Nksdpfx Ahexbtzhsvow

Condition: refurbished (used), T30-1000 KTN/NC The machine will be completely overhauled and will be like new! The machine gets a completely new electrical system with our control. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Njdpsfgwk Hefx Ahvokw Z axis designed for max. Drilling depth 1000 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, drilling depth: 750 mm, spindle speed (max.): 6,720 rpm, drill diameter: 20 mm, spindle stroke: 1,450 mm, distance between centers: 120 mm, TECHNICAL DETAILS Number of spindles: 4 Spindle spacing: 120 mm Nksdpfxowm Ebye Ahvew Spindle drive: 4 × 4 kW Spindle speed: 672 – 6,720 rpm Spindle stroke: 1,450 mm Drill diameter: 4 – 20 mm Drill depth: 750 mm EQUIPMENT - Chip conveyor - Air cooler - Filter unit - Revolving belt with workpiece carriers

Condition: used, Deep driller TBT T10-120 Nkodsxbtzzspfx Ahvew

Condition: used, Deep driller TBT T10-2-500 Nkedpfexbtznox Ahvow

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm Nodpfow E H E Rsx Ahvjkw - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Deep driller TBT T10-2-500 Nkodpfsxbtzuex Ahvew

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws Nksdswh Rp Eopfx Ahvjw - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil Nodpfxsxdm Awe Ahvekw - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW