Deephole Drilling and Milling Machine

Emsil group Narwhal

Condition: ready for operation (used), Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible. Hedjv Uqcgopfx Ahvei

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Hsdsvr Eh Espfx Ahvoi Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, color: green, overall weight: 12,900 kg, maximum load weight: 3,800 kg, lifting height: 15,740 mm, Year of construction: 2007, operating hours: 6,100 h, machine/vehicle number: Roto 38.16, Equipment: UVV, all wheel drive, hydraulics, pallet forks, Rotating Telehandler Technical Specifications Working Height: 15.74 m Lateral Reach: 12.98 m Swivel Range: 415° Length: 6.24 m Width: 2.24 m Clearance Height: 2.85 m Hodpfxotucp To Ahvoi Load Capacity: 3,800 kg Work Platform Capacity: 300 kg Total Weight: 12,900 kg Support: Outriggers Power: Diesel Attachment: Forks Driver's License Class: 3/B Dates/Stands UVV (German Accident Prevention Regulations) until 11/2025 Operating Hours: 6,100 hours as of February 2024 Interested? Then we're happy to help you at any time. You can reach us Monday to Friday from 7:00 a.m. to 4:00 p.m.! The stated price excludes VAT. Subject to change and errors!

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Hodporfw Nhofx Ahvoi Tool changer 20 magazine places chip conveyor

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Hsdjq U R T Nspfx Ahvoi Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : Hedpfsvf Nw Djx Ahvji X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 YEAR OF FIRST INSTALLATION : 2008

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Hsdet Hwq Repfx Ahvei Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Hjdpoxlza Hjfx Ahvoi Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW Hodpfxjt Hxbwo Ahvji weight of the machine ca. 2 t dimensions of the machine ca. 736 m

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Hedpfx Ahowbuyzsvoi