Used Hole Number for sale (29,762)

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Kwedpfxewkir Do Ad Njt Storage location: Nattheim

Condition: used, Year of construction: 2011, machine/vehicle number: IntNr231315, Technical Data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Airflow rate approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (WS2 mod. similar) Accessories & Features • Compact design for direct installation on or beside CNC machines • Stand for extraction • Three-stage cleaning for effective oil and coolant mist separation Kjdpfeyapruox Ad Nowt • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low noise operation, and long-life filter elements Subject to technical changes, errors and prior sale!

Condition: excellent (used), Drilling machine for turned components Triade Number of drilling units: 3 Drilling depth: 100 mm per side Kedpfxeyabz Ie Ad Newt

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Ksdsxnlflopfx Ad Nswt Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Year 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm Kodpfxjx Uz Tzj Ad Nswt 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), functionality: fully functional, Drilling machines for turned parts TRIADE FR-3 V-V Kwedpox Uyfpsfx Ad Nst

Condition: used, No. 3254 Kjdpfx Adsx T Rzfo Newt Hinge-hole boring machine / hinge-hole drilling machine Hettich Blue Max Mini Used Hinge-hole boring machine / hinge-hole drilling machine Hettich Blue Max Mini together with a hole-line drilling machine Technical data Hettich Blue Max Mini: Drill motor 400 V, 1.1 kW, 2800 rpm Pneumatic feed Technical data hole-line drilling machine: 1.1 kW, 2800 rpm With foot pedal Transport dimensions approx. 1200 x 800 x 900 mm LWH Weight approx. 100 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), functionality: fully functional, Drilling machines for turned parts TRIADE FR3 Kwsdpfx Adjx Ty Uhe Nst

Condition: excellent (used), functionality: fully functional, Drilling machines for turned components Genini TR4 Kwedpfsx Tuvyjx Ad Not

Condition: excellent (used), Drilling machines for turned parts TRIADE FR5 Kwjdpfex Tupyjx Ad Net

Condition: excellent (used), Drilling machines for turned parts TRIADE FR6SC Kwodex Tuimspfx Ad Nst

Condition: excellent (used), Drilling machines for turned parts TRIADE FR6S Kjdpfsx Tt Emsx Ad Njwt

Condition: excellent (used), Drilling machines for turned parts TRIADE FIR-6 Kedpfxex Ttnbe Ad Njwt

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Kedpfxsx Tp Aho Ad Nswt Year: 2005

Condition: good (used), Incl. approx. 140 dies Technical data: Punching force: 500 kN Stroke: 32 mm Continuously adjustable stroke: 10–32 mm Strokes at 10 mm stroke: 35 min⁻¹ Throat depth: 510 mm Working height to die: 1070 mm Installation height: 350 mm Punching table width: 255 mm Punching capacities with standard punching attachment and table: Ø 31 mm in 12 mm material Ksdpeyapl Ijfx Ad Nowt with universal punching saddle: U-beam, web: 100–300 mm I-beam, web: 80–300 mm U-beam, flange: 100–300 mm I-beam, flange: 80–300 mm Punching capacities with special punching attachment SV 58 / 65: Ø 58 mm in 7 mm material / Ø 65 mm in 6 mm SV 90: Ø 90 mm in 4 mm SV 130: Ø 130 mm in 3 mm Machine data: Rated power: 4 kW Oil capacity: 45 l Net weight (incl. oil): approx. 1,320 kg Machine dimensions (L × W × H): 108 × 65 × 168 cm

Condition: good (used), Year of construction: 2008, CNC Deep Hole Drilling Center Machine type: Degen UTB800/G Control: Heidenhain TNC310 Year of manufacture: 2008 TECHNICAL DATA: Travel distances: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed rate: 6,000 mm/min Swivel range: Z: +/- 10° Table size: 1,100 x 650 mm Max. table load: 2,000 kg Tool holder: HSK 63 Kwodpfowxaf Rsx Ad Net Max. speed: 4,000 rpm Drive power: 7.5 / 5.5 kW Drilling diameter: 4–25 mm Accessories: Electronic handwheel High-pressure pumps Internal cooling (IKZ): 0–90 bar Coolant tank: 600 l Paper band filter

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231432, CNC short turning machine – Citizen Miyano BNE-51MSY Year of manufacture: 2018 Condition: Very good, fully operational Availability: At short notice Brief description For sale is a Citizen Miyano BNE-51MSY CNC short turning lathe in MSY configuration featuring main and counter spindles, as well as a Y-axis. This machine is ideal for precise and cost-effective complete machining of complex turned and milled parts in series production. Equipment / Highlights - Fixed headstock (short turning) - Main spindle + counter spindle - Y-axis - 2 tool turrets, each with 12 stations - Driven tools - Simultaneous machining capability - High rigidity and process reliability Technical data - Max. bar capacity: Ø 51 mm - Max. turning diameter: approx. 165 mm - Max. turning length: approx. 380 mm - Main spindle speed: up to approx. 5,000 rpm - Counter spindle speed: up to approx. 5,000 rpm - Control: Mitsubishi MELDAS - Machine weight: approx. 8,000 kg Kwedpfx Asx Tg Sgsd Njt The machine is fully functional, both electrically and mechanically. Complete technical documentation available. The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale!

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231463, Machine Designation: CNC Short-Turning Lathe Manufacturer: Index Model: ABC Year of Manufacture: 2017 Kwjdpfx Ajx Tftvod Net Control System: Fanuc 32i-B Operational Status: Fully operational Operating Hours: approx. ___ hours Technical Data Spindle Bore: Ø 42 mm Travel and Feed Data: X-Axis Travel: approx. 90 mm Z-Axis Travel: approx. 280 mm Rapid Traverse X: approx. 27 m/min Rapid Traverse Z: approx. 36 m/min Upper Turret (Main Tool Carrier): Number of Stations: 8 (1 synchronizable) Tool Mount: VDI 25 Capable of powered tooling Lower Turret: Number of Stations: 6 Non-driven Rear Side: 5 stations for back-working operations Simultaneous Machining: Up to 3 tools at the same time Coolant System & Chip Conveyor Bar Feeder: IRCO ILS MUK 7012-II, Year 2015 Accessories / Tooling / Manuals Machine Dimensions & Weight Machine: approx. 2830 × 1500 × 2200 mm, Weight: approx. 3,500 kg Coolant System & Chip Conveyor: approx. 1600 × 1250 × 1780 mm, Weight: approx. 680 kg Bar Feeder IRCO ILS MUK: approx. 1800 × 1000 × 1280 mm, Weight: approx. 650 kg The machine is fully operational and in good used condition. For further information or to arrange a live demonstration under power, please do not hesitate to contact us. All technical specifications and details are subject to change and error. Subject to prior sale.

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Kwedpfx Adsx E Inge Nst Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Technical data (all information without guarantee): Kodpfx Ajx Dtp Rod Njwt – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: excellent (used), 10 x deep hole drills make Botek 3 pieces 6,5 x 320 mm 2 pieces 10,2 x 190 mm Ksdpfxohl Awdo Ad Njwt 3 pieces 10,4 x 250 mm 1 piece 1 x 11 x 350 mm 1 piece 11 x 270 mm Weight 1,5 kg

Condition: good (used), Year of construction: 2020, operating hours: 1,431 h, load capacity: 1,400 kg, lifting height: 5,316 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, empty load weight: 1,600 kg, mileage: 1,431 km, Electric stacker Brand: Still (Germany) Year of manufacture: 2020 Capacity: 1,400 kg Lifting height: 5,316 mm; Overall height: 2,265 mm; Operating hours: 1,431 hours WEIGHING SYSTEM The battery is from 2018: Equipped with an automatic filling system and an external charger Schedule a test drive. Watch the video on YouTube Kedpsx S I S Eefx Ad Njwt

Year of construction: 2019, operating hours: 13,000 h, condition: used, machine/vehicle number: IntNr231388, Technical Description – PERO RO Industrial Solvent-Based Parts Cleaning System The PERO RO is a high-performance industrial parts cleaning system designed for the effective and environmentally friendly cleaning of workpieces and components using solvents. It is suitable for a wide range of applications within the metalworking industry and ensures high cleanliness standards while maintaining economic operation. Features: Kwsdpex Sv Unofx Ad Net • Cleaning with organic solvents (e.g. hydrocarbons or modified alcohols) • Closed-loop process with integrated solvent circulation • Suitable for small to medium batch sizes and varying component geometries • Automated process control for repeatable cleaning results • Robust construction for continuous industrial operation Typical Applications: • Degreasing of turned and milled parts • Cleaning before assembly or coating • Removal of coolants, oils, and particulates The machine can be inspected under power by prior arrangement. Specification and data subject to change and error, prior sale reserved!

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos Kwjdpfx Aowcldaod Net

Condition: good (used), T-slot plate, clamping plate with holes, plate field, welding table, welding table -Dimensions: 3012/2010/H710 mm -Panel thickness: 82 mm -Plate: with supporting ribs -Weight: 3370 kg Kwedpecpc Spefx Ad Not