Condition: excellent (used), functionality: fully functional, The container was fitted with breakwaters to make it a viscous material promote mixing. Cool and heat the material using the jacket on the tank is done with liquid. Stainless still tank! Sizes: Height 1000 mm Diameter: 850 mm Volume: 550 l Electric motor: Manufacturer: Bauer 1,5kw 380v 50hz Type: D7300 Speed: 32u/min Gedpjg Rcp Hofx Afisuh Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), 12,500 liters per minute at 8 bar per pump with a power of 237 kW. Engine brand FIAT, model 9L15 Guedpfxjv Rwyde Afish

Condition: ready for operation (used), An HPLC separation column YMC for the analysis and purification of chemical substances in liquid samples is available. Phase: C18, particle sizes (analytical): 3µm/5µm, particle sizes (preparative): 10µm/15µm/20µm/50µm, pore size: 12nm, surface area: approx. 330m²/g, carbon content: 14%, pH range: 2–7.5, max. operating pressure: 200bar. An on-site inspection is possible. Godpfx Afsxnbrzjisuh

Condition: ready for operation (used), General Location Bremen Condition used Gsdpfx Aoinvcwjfisuh Tank volume 17,300 liters Max. permissible operating temperature 100 °C Specific weight of medium 1.2 (to/m³) Type of construction upright Stand form Feet Number of feet 4 pieces Technical data / dimensions Diameter inside 2,900 mm Cylindrical height 1,800 mm Total height 5,100 mm Wall thickness bottoms 4 mm Wall thickness cylinder 8 mm Equipment Technical documents Drawing,TÜV papers Manhole / dome in the top bottom (DN 600), hand hole Type plate Outlet 50 mm Remark slight adhesions Remarks 1 tank (internal no. 7081-3) with a smaller dent as well as a cut-off connection in the top bottom

Condition: used, Used Buhler horizontal hammer mill. - Carbon steel rotor has diameter approximately 980 mm. Gujdpfx Aexlhibjfijh - Rotor is divided into 3 section. - Rotor has (8) shafts, each shaft is equipped with (10) swing hammers. - Rotor is driven by 75 kW, 380/660 V, 1480 rpm, 50 Hz electrical motor. - Includes number of spare screens and switchboard.

Condition: good (used), Year of construction: 2016, Rosenmund pressure filter, 7 m², 316SS, extensive overhaul 2016, including segmented AGP outlet valve, screen segments, variable speed drive, hydraulic power pack, dry gas mechanical seal, mixer: RPM: 16–1460. P=15 kW. Year of construction 2016. Alloy: 316SS. Gujdev Rn S Depfx Afish

Condition: used, Used Nikro spol. s r.o. (Slovakia) 2013 total capacity polished stainless steel 316 L vertical reactor. Internal 1300 mm diameter x 1035 mm straight side height. Has bolted dished top and welded dished bottom heads. Internal rated 2 bar maximum pressure and 130°C maximum internal temperature. Stainless steel jacket rated 2 bar maximum pressure and 90°C maximum temperature. Jacket is insulated by black foam rubber and claded by stainless steel plate. 2-blade agitator driven through Nord gear box by 0.75, 50 Hz, 400 V, 1395 rpm electric motor. Has Anga mechanical seal on the shaft. Top head connections include (1) 200mm diameter manway. Central bottom discharge. Mounted on (4) lugs. Specifications: Capacity: 527 gal Diameter: 51.18" Straight Side: 41" Material of construction: Stainless steel Type Of Heads: bolted dished top and welded dished bottom Internal Pressure: 29 PSI Jacket Pressure: 29 PSI Internal Temperature: 130°F Type of stainless: 316 L Legs/Lugs: 4 Dimensions: 1300 mm diameter x 1035 mm straight side height Gedexlhhwepfx Afieuh

Condition: good (used), Alloy: 316 SS Godjv Rpbmjpfx Afiouh

Condition: used, Used SGL Carbon Technic Sas (France) model CKL7 diam.16 - 10 blocks, graphite (DIABON NS1) heat exchanger/cooler-condenser with surface area 102,6 sq. meters. Has 10 graphite blocks, each diameter 765 mm x 347 mm height. Construction material of shell P265GH (W.Nr. 1.0425). Process side rated full vacuum/3bar at 1 to 110 deg.C. Design pressure -1/3Bar at 1 to 110 deg.c. Service side rated 5 bar design pressure at 1 to 40 deg.C. Process side capacity 542 litre and service side capacity 648 litre. Product inlet diameter: 450 mm and 100 mm outlet. Dimensions: 1000 mm diameter x 4520 mm height. Mounted on (3) lugs. New 2010. Transport dimensions: 4700 mm lenght x 1 450mm width - 1700 hight. Guedpfx Asxlhgmjfioh Transport weight: 5 600 kg, (only exchanger 4950 kg). Weight: Actual: Kg5600.0

Condition: used, Used Morton model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Guodjxlhnwjpfx Afish Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: used, Used Flottweg model Z4D-3/409 Sedicanter horizontal decanter centrifuge. Bowl made of duplex stainless steel 1.4463, has inside diameter 470 mm, maximum rotation speed 4800 rpm, maximum sediment density 1.3 kg/dm3, maximum working temperature 50°C. Scroll and inlet protected by tungsten carbide. Unit driven by 30 kW motor. Includes hydraulic device for screw drive with power consumption 7.5 kW and differential 2-25 rpm, control panel and technical documentation. Gusdpfsxlgkdsx Afish Specifications: Bowl Diameter (Length): 18.504" Material Of Construction: Duplex Stainless Steel 1.4463 Motor Power: 30 hp Max Bowl Speed: 4,800 RPM Conveyor Material: Tungsten Carbide

Condition: used, Automatic machine for lipstick filling Manufacturer: Cosmatic (IT) Model: SM43 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. Gusdpfx Afjxlgkkoish New 2016.

Condition: used, Used Hosokawa model 35-MSC-44 nauta conical double screw mixer. - Working volume: 3125 litre. - Working pressure: Atmospheric. - Product contact parts: Stainless steel 1.4301. - Cone has dimensions (approx.): 2334 mm diameter x 3366 mm cone height / 4609 mm total height (bottom edge of discharge valve - drive). - Top semi-circular covers: 1x hinged cover with safety mesh, 1x bolted cover with man way and flange DN400 - Non-supported screw agitators (double screw design): driven by 11 kW, 1500 rpm, 400 V electric motor, final rpms of screws 70 rpm - Arm: driven by 1.1 kW, 1500 rpm, 400 V electric motor, final rpms of arm 0.82 rpm - Lump breaker: driven by 5.5 rpm, 1500 rpm, 400 V - Includes: inspection doors at the bottom of cone (approx. 800 mm height x 500 mm wide at the top / 250 mm wide at the bottom), discharge valve. - Mounted: (3) lugs. Gjdoxlgi Tjpfx Afisuh

Condition: used, Used Netzsch model 606.70 stainless steel dissolver. Mixing shaft with stainless steel toothed disc agitator diameter 550 mm driven by ABB electric motor 58 kW, 380 V, 1485 rpm, 50 Hz, rated EX-91.C.3460. Hydraulically lifted arm, total height in lower position approx. 2850 mm/total height in upper position approx. 4350 mm. Includes integrated lid (dia 1220 mm), can holding/fixing device, local control panel and electrical switchboard. Specifications: Gsdoxlgi Hspfx Afiouh Power: 58 kW

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Godpfoxlgiysx Afisuh

Condition: used, Used approximately 150,000 litre stainless steel vertical tank. Unit measures approximately 4000mm diameter x 11500mm straight side. Has welded dished top and flat bottom heads. Godexlgitspfx Afijuh Specifications: Capacity: 39,625.7 gal Diameter: 13.12' Height: 37.73' Type Of Heads: welded dished top and flat bottom heads Vertical/Horizontal: vertical Type of stainless: Stainless steel

Condition: used, Comprehensively tested, used Netzsch Max Shear 3 Inline disperser. Includes a stainless steel inline mixer with 76mm diameter slotted disintegrating head direct driven by 4 kW 3/50 2885rpm motor. Also includes double acting mechanical seal with 2.6 litre seal pot rated 10 bar at 60 deg.c. Mounted on stainless steel frame. Gusdpoxlgimofx Afieh

Condition: used, Used DeDietrich model CE10000 vertical glass lined reactor. Approximately 10,000 litre working capacity & 11,710 litre total capacity. Internal rated 6 bar/full vacuum design pressure at -25 to 200 deg.c. External mild steel jacket rated 6 bar/full vacuum design pressure at -25 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with drive. Unit is mounted on (4) legs. Specifications: Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 87 Gujdpfx Aexlgigsfieh Legs/lugs: 4

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. Gedoxlgh Nspfx Afieuh ?v=iV2YFSJEqPc

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Gsdpoxlghiefx Afieuh Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: used, Used GEMS approximately 56.8sqmt 316L stainless steel horizontall shell and tube heat exchanger. Unit has (260) 316L stainless steel tubes which measure approximately 19mm diameter X 3,650mm long 300 litre capacity, rated 9 bar design pressure at 80 deg.c. 316L stainless steel shell which measures approximately 500mm diameter X 3650mm long 420 litre capacity rated 2 bar/full vacuum design pressure at 120 deg.c. Unit has 316L stainless steel heads. Has bottom mounted support lugs. Last used as a shell condenser. Guedpfx Ajxlgg Ejfieh

Condition: used, Décanteuse centrifugeuse usagée Alfa Laval série 4500 modèle XMNX 4545 en acier inoxydable. Bol de 450/258mm de diamètre X 1460mm de long. Densité maximale des solides 1,2 kg/dm3. Entraînement par courroie du bol par un moteur de 30 kW et une boîte de vitesses à un maximum de 3250 rpm. Comprend une pompe d'alimentation unique en acier inoxydable Netzsch type IE 50 BK entraînée par un moteur de 4 kW. Comprend également un rouleau de rechange en acier inoxydable. Capacité nominale de 16 mètres cubes/heure en entrée avec 0,5% de solides secs et en sortie avec 5% de solides secs. Montée sur châssis avec réservoir de collecte des solides. Specifications: Material Of Construction: Stainless Steel Guodpfxexlggle Afioh Motor Power: 40.2 hp Max Bowl Speed: 3,250 RPM Size: 4500 Conveyor Material: Stainless Steel Other Extras: Netzsch type IE 50 BK stainless steel mono feed pump

Condition: used, Used LODIGE mixer Type M5R - Double jacket - Total volume : 5 litre - Useful capacity : 4 litre - Motor : 0.75 kw – Hp 1 – 220/380 volts - Variable speed Gjdpfxsxlgk Do Afiouh Specifications: Bowl Volume: 4 gal Motor Power: 1 hp Jacket (Y/N): Y

Condition: used, HOSOKAWA ALPINE Blade mill Gujdpoxlgk Rsfx Afijh Type ROTOPLEX A 80/160 RO 8 decks rotor with 5 blades 6 deck stator with 5 blades Motor : 160 kw – Rpm 1485 – 3x 380 volts

Condition: used, Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish. Specifications: Capacity: 830 L Diameter: 850 mm Height: 1,200 mm Type Of Heads: Dished Gujdpfx Aexldtpsfijh Vertical/Horizontal: Vertical Type of stainless: Stainless Steel AISI 316L and AISI 304 for The Jacket Legs/Lugs: 3 legs equipped with tensions cells