Used Heat treatment equipment for sale (7)

Condition: used, SKU : 204U026 Location : Barneveld Make : Werner & Pfleiderer Bjmiv089Li Type : ZSK 58 F96E . : 231616 Sizes Screw diameter : 57.8 mm Main Features Motor : 74 KW Inlet diameter : 100 mm L/D : 27 Specified Features - Double screw extruder Double screw extruder : check Screw diameter : 57.80 L/D : 27 Co-rotating : check Vented : check Water cooling : check AC-motor : check Screw speed : 191 rpm Material : Nitriding steel 1.8519 Year of construction : 1995 With switchgear : check (as is) Floorspace : 2.5x1.4 m Total height : 1,5 m Extra Specifications : the currently installed “head” on the extruder is a cleaning head. this is not a die. - there are 2 screw shafts present. - no screw segments present. - this extruder comes with brush screws. - the extruder comes with 4 extra housing segments. this extruder was part of a complete system. any associated machines are: Collin Calander Pharma 200x400 , sku: 204U929 Sollich KK240 - Belt cooler, sku: 204U035 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: good (used), WILL + HAHNENSTEIN E - TEB - 2 Electric heating chamber Heating output: 8.5 kW Operating temperature: max. 150 ºC Internal chamber dimensions: 139 x 92 x 159 cm Manufacturer: Will+Hahnenstein Year of construction: 2010 Floor Space: 175 x 130 x 220 cm Dpqpe7

Condition: new, Year of construction: 2018, Unused and installed De Lema type DLST/L dry heat steriliser / depyrogenation unit with Hosokawa Micron dispensing isolator. De Lema unit designed at 250 deg.c. for the depyrogenation of dry aluminium canisters with cycle time of approximately 7 hours. Tray capacity between 15 & 35 canisters per tray depending on size. The Hosokawa unit designed for filling canisters with powder including closure and bagging of canisters. Dispensing time is approximately 1.33kgs/min depending on product, number of operators, distribution of canister size and filling volume. Total makespan between 22.9 minutes to 29 minutes depending on product and canister size. The system was designed to handle the following size canisters: Dpl3N7 - 2.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 144mm - 6.25 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 309mm - 12.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 383mm - 32 litre with neck diameter 116mm, body diameter 300mm, height (w/o closure) 539mm System installed and commissioned but has never been operated on any products. Further technical specifications, additional information and site inspections are available upon request.

Condition: excellent (used), Year of construction: 2007, 0 200 °C internal dimension 1,2 x 1,3 x 2,0 m 0 400 V / 50 Hz 0 3000 l B8Wqx3Qri3 current capacity 23 Kw weight of the machine ca. 2 t dimensions of the machine ca. 2,0 x 1,7 x 2,7 m

Condition: excellent (used), Year of construction: 2014, Operating hours: 2,731 h, Functionality: fully functional, Machine/vehicle number: 60501401, Type of input current: three-phase, Total width: 2,000 mm, Total length: 4,100 mm, Total height: 2,800 mm, Protection type (IP code): IP54, Power: 30 kW (40.79 HP), Mechanical vapour recompression vacuum evaporator with forced circulation for water treatment. Edwrbzzg Nominal production of distillate: 15000 l/24h Comissioned in 2014 and hardly used, fully functional.

Year of construction: 2011, Condition: used, Box Length: Box Width: Box Height: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm 7Vy2Wmevm7 access door W x H: 800 x 980mm with safety locking system room height 1400mm

Condition: used, Functionality: fully functional, Machine/vehicle number: 416700, Type of input current: three-phase, Workpiece weight (max.): 363 kg, Total width: 760 mm, Total length: 800 mm, Total height: 1,560 mm, Input voltage: 400 V, Used Huber model Unichiller 350Tw-H12 spez. Operating temperature range: -20°C...100°C, temperature stability at -10°C is 0.2K. Cooling power at 15°C is 35 kW, at 0°C is 25 kW, at -10°C is 16 kW, at -20°C is 10 kW. Refrigerant R449A. Unit includes 5,7" colour touchscreen, ethernet and USB and RS232 connections, circulation pump. Overall dimensions 800 x 760 x 1560 (h) mm, weight (netto) 363 kg. Dnyprv