Used Laboratory equipment for sale (28)

Condition: ready for operation (used), Bathless Dissolution Test System with 6 Vessels. The DISTEK Evolution 6100 Bathless Dissolution Test System is a revolutionary piece of equipment that eliminates water bath issues with its patented bathless technology. It is designed to meet today's demanding standards for accurate temperature control and test reporting, maintaining much tighter tolerances for temperature and RPM than conventional water bath systems. The unit has been tested and comes with a 30-day warranty, with slight cosmetic blemishes from normal use. With six complete sets of vessels, lids, shafts, paddles, and heating jackets, the Evolution 6100 offers enhanced precision and functionality. It offers rapid media heating, precise individual vessel temperature control, and advanced method storage and sorting capabilities. Key Features Patented bathless technology for accurate temperature control 6 complete sets of vessels, lids, shafts, paddles, and heating jackets Rapid media heating and precise individual vessel temperature control Advanced method storage and sorting capabilities Specifications Dissolution Vessels: Six Standard/Up to Seven Vessels Volume: 500mL - 1000mL programmable Vessel Heating Rate: Approx. 1.5C per minute RPM Control Range: 25-300 RPM, digitally controlled, closed loop Resolution: 0.1 RPM Accuracy: 0.2 RPM Display: LED's, .75 (19mm) high Motor: High Torque, Permanent Magnet Vessel Temperature Control: Independently controlled two-zone heater jackets Display Resolution: 0.01 C Accuracy: 0.25 C Interface Ports: RS-232 (2), RS-485 (1), Parallel Printer (1) Construction Materials: Cast Aluminum, Stainless Steel, Acid resistant solid state heating elements, Engineered Plastics Electrical Power: 115V 15V 50/60Hz 15A or 230V 15V 50/60Hz 9A Weight Metric: 86.1826 kg Imperial: 190 lb Dimensions Metric: 27.94 cm x 53.34 cm x 116.84 cm Imperial: 11 in x 21 in x 46 in Bjlqswg Rrwsz R Tiowl Harmonized Code 841989

Year of construction: 2016, Condition: like new (used), Anton Paar MCP 150 Polarimeter – Used, Excellent Condition This Anton Paar MCP 150 Polarimeter is offered in excellent condition from a well-maintained GMP-compliant laboratory. Ideal for laboratories requiring precise optical rotation measurements and full 21 CFR Part 11 compliance, especially in pharmaceutical, fragrance, and food quality control applications. Key Features: - Model: MCP 150 - Wavelength: 589 nm (LED) - Measuring range: ±89.9°, resolution 0.001°, accuracy ±0.01°, repeatability ±0.01° - Peltier temperature control (15–35 °C), with ±0.1 °C accuracy - Compact design: 370 × 320 × 130 mm, 8.6 kg - Interfaces: USB, Ethernet, RS232, CAN bus - Compliant with: 21 CFR Part 11, Ph. Eur., USP, JP, GAMP5, GMP Included Accessories: Bwjlqswbhktez R Tisl - Quartz control plate (+8°Z, +3°OR) with Toolmaster™ wireless ID - 100 mm stainless steel polarimetry tube with Luer adapter and Peltier temperature control - USB dongle for Anton Paar PS software license - Full original documentation including: - Installation Qualification (IQ) - Calibration certificates - User manual (German) Condition: Used, but in excellent working condition. Device and accessories are clean, well-maintained, and fully functional. Directly from a controlled GMP environment Located in Liestal, Switzerland.
Contact for quotation, shipping, or inspection.

Condition: new, Functionality: fully functional, New device!! Special offer!!! New price: €160,000 Firing and thawing chamber for the pharmaceutical industry. Application Pharmaceutical and Bioprocessing. The Farrar Scientific Controlled Rate Chamber permits fast freeze/thaw from +40C to -80C, uniform bulk freezing and/or thawing of Phase-Change Material (PCM) or products contained in a variety of containers (bags, bottles or any size containers) such as single use system (SUS), polycarbonate vessels or polypropylene vessels. Temperature Range Programmable +40 ̊C to –80 ̊C Gbs7obps Bwolqz R Tov Rnl Doijl Chamber Volume 659.8 L (23.3 Cu. Ft.) Interior Dimensions (W x D x H) 34” x 27.5” x 43” 863.6 x 698.5 x 1092.2mm Exterior Dimensions (W x D x H) 75” x 38” x 80” 1901.5 x 960.4 x 2028.8mm Pull Down Empty Chamber < 38 minutes from +25 ̊C to –80 ̊C Door Open Recovery at –80 ̊C < 10 minutes 100L Load +25 ̊C to –80 ̊C < 12 Hours Unit comes with the complete documentation. Also the factory report. The unit is unused and in its original packaging. Shipping worldwide in a wooden box. (#7709) No further warranty or guarantee.

Year of construction: 2015, Condition: ready for operation (used), Four Kern precision scales from different product families are available. 1) Kern 440-49N, type: single-range scale, weighing system: strain gauge, max. weighing weight: 4000g, readability: 0.1g, resolution: 40000, linearity: +/-0.3g, reproducibility: 0.1g, weighing dimensions X/Y: 150mm/170mm. 2) Kern PRF 3000-2, type: single-range scale, weighing system: strain gauge, max. weighing weight: 3000g, readability: 0.01g, resolution: 300000, linearity: +/-0.05g, reproducibility: 0.03g, weighing diameter: 120mm. 3) Kern EW 1500-2M, readability: 0.01g, calibration value: 0.1g, max. weighing weight: 1500g, reproducibility: 0.01g, linearity: +/-0.02g, weighing diameter: 140mm. 4) Kern EW 4200-2NM, type: single-range scale, weighing system: tuning fork, max. weighing weight: 4200g, readability: 0.01g, resolution: 420000, linearity: +/-0.02g, reproducibility: 0.01g, weighing dimensions X/Y: 180mm/160mm. Documentation available. On-site inspection is possible. Bwelqz Rov Rfqkj Tisl

Condition: excellent (used), Laboratory testing equipment Technical characteristics: 1) Perkin Elmer Clarus 69 gas chromatograph Name: Gas chromatograph Model: Clarus 69 Year of manufacture: n/a purchased 2021 Manufacturer: Perkin Elmer Country of manufacture: Singapore CE marking yes ID number: 690S19111503 Number of units worked n/a Technical data: • Power supply 220-240 V / 50-60Hz • Dimensions 83 x 67 x 82 cm • Weight 69 kg • Scanning speed variable in the range of up to 12500 amu/sec • Mass range 1.0 - 1200 (amu) • Power 3120 VA 2) Set for spectrophotometric determinations and titration Name: Set for spectrophotometric and titration determinations Model: - Year of production: n.d. purchased 2021 / 2020 Manufacturer: Methrom Country of production: Switzerland CE marking yes Identification number: - Number of units processed n.d. Technical data: • OMNIS Titrator in stirrer • OMNIS per. mod.w/o • OMNIS Main module SR Bolqjv H Ruyez R Tijwl • Dosino • Dosino • Conductivity Module 3) Density meter DMA 501 Anton Paar Name: Density meter Model: DMA 501 Year of manufacture: n.d purchased 2021 Manufacturer: Anton Paar Country of manufacture: Austria CE marking yes ID number: 83293429 Number of units worked n.d Technical data: • Power supply 220-240 V / 50-60Hz • Dimensions 38 x 27 x 18 cm • Weight 13.5 kg • Measuring range Density: 0 g/cm3 to 3 g/cm3; Pressure: 0 bar to 10 ba • Accuracy Density: 0.001 g/cm3 ; Temperature: 0.3°C 4) Spectrum Two NIR InGaAs Parameter Constancy Monitor Name: Spectrum Parameter Constancy Monitor Model: DMA 501 Year of production: n/a purchased 2021 Manufacturer: Anton Paar Country of production: Austria CE marking yes ID number: 83293429 Number of units worked n/a Technical data: • Power supply 220-240 V/50-60Hz • Dimensions 30 x 21 x 45 cm • Weight 13 kg • Detector type LiTaO3 5) Viscometer Visco QC 100 -R Name Viscometer Model: DMA 501 Year of production: n/a purchased 2021 Manufacturer: Anton Paar Country manufacture: Austria CE marking yes Identification number: 83264979 Number of units worked n.d. Technical data: • Power supply 220-240 V/50-60Hz • Dimensions 38 x 59 x 36 cm • Viscosity range from 1.6 to 40 million • Max. spring torque 0.7187 [mNm] Equipment: • Hydrogen generator PG H2 250 Plus PerkinElmer no. VPHG-000225 • Oil-free compressor DK 50 2V50S/M EKOM no. S6595-12-2020 • Zero air generator N-GC 1500 PLUS PerkinElmer no. NGC170215614 • PerkinElmer TURBOMATRIX 40 Gas Chromatograph Attachment No. HS40S1912284 • Dell OptiPlex XE3 C1PZF73 Computer • Dell OptiPlex XE3 C1X8G73 Computer • Dell Vostro 3681 F5TSF73 Computer • Signal Wiring • Power Wiring A set of laboratory devices used for: • separation of gaseous substances and those that can be converted to a gaseous state under chromatographic analysis conditions - by evaporation or by chemical changes • determination of the presence and concentration of a substance in a sample • analyses enabling quantitative determination of a specific substance dissolved in a sample • density analyses • control of parameter constancy • viscosity

Condition: used, Functionality: fully functional, IMA COATING MACHINE, MODEL GS EVOLUTION LAB Laboratory machine and for small production batches. Thanks to its interchangeable drum it can process a wide range of capacities (from 0.5 to 30 liters). MACHINE FEATURES three interchangeable baskets automated easy scale-up Bjlqjv E Hf Eoz R Tijwl MANUFACTURING CHARACTERISTICS Minimum/maximum working capacity: 0.5÷30 l Pan diameter: 820 mm (ca) Pan mouth diameter: 300 mm (ca) ENERGY CONSUMPTION Pan motor power: 0.55 KW (ca) Process air delivery: 350 m³/h (ca) Power consumption for standard equipment: 14 kW (ca)

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Bwjlqsf I Ew Hez R Tisl Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, TECHNICAL DETAILS Bwelqz R Teu D I H Sjisl - Volume : 4.3 [l] - Timer : 0-120 [min] - Temperature setting : 0-100 [°C]

Condition: good (used), MANESTY ACCELACOTA laboratory coating turbine Perforated turbine with counter blades Spray arm For batch sizes of around 15kg Bwjlqz Rsi Enzgs Tisl

Condition: good (used), Year of construction: 2009, Functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Bwelqz Revpu U Ne Tijl Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 3 25°C/60%RH - A0431_00 - Year of construction: 2009 Climate chamber 4 30°C / 65% RH - A0432_00 - Year of construction: 2009

Year of construction: 2015, Condition: excellent (used), Clean Air Workbench Heraguard HPH 15 Thermo Scientific Used Location Cologne regularly serviced Bwjlqz R Tsiv S Agjiol Laboratory resolution various microscopes and other equipment gladly

Year of construction: 1996, Condition: used, Incubator with control up to approx 80 ° with about the internal dimensions 400 x 500 x 350 Bwolqzobylq He R Tiel

Condition: good (used), Atlas automated chemical synthesis system Bwolotwdp Asqz R Tijl

Condition: used, TECHNICAL DETAILS - Magnification : 6,4-10-16-40 - W 10/23 Bwolsug U Rtoqz R Tijl

Condition: as good as new (ex-display), Sodium Chloride 35 Pack each one is 25 Kg Bwelqzeqyynyj R Tiol

Condition: good (used), Year of construction: 2005, Functionality: fully functional, (2x) Climate chamber for stability tests Bolovpu Tloqz R Tiowl The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 1 25°C/60%RH - A0429_00 - Year of construction: 2005 Climate chamber 2 25°C/60%RH - A0430_00 - Year of construction: 2005

Year of construction: 2012, Condition: excellent (used), CyBIO Felix 305015-100-24 Belqjiv S Eqez R Tiewl Pipetting robot year of construction 2012

Year of construction: 2021, Condition: excellent (used), We offer a countertop autoclave in very good condition. Boljumth Ssqz R Tiswl Autoclave Prestige Medical 12L, sterilization temp 121 stC Year of production: 2021 Brand: PrestigeMedical Model: Classic Extended Media Personal collection from Gadansk (Poland, Poland)

Year of construction: 2020, Condition: like new (used), Sympatec laser diffraction system. HELOS/BR multi range, laser diffraction sensor for particle analysis with automatic set-up of selectable measuring range of up to 5 range modules between 0.1 micron – 875 micron. RODOS, dry dispersing system, injector diameter 4 mm, bulk hardened steel; with funnel adapter, including flow – optimized extraction, recommended particle size range: product dependent up to 1500 micron. VIBRI, intelligent vibratory feeder, for the RODOS or GRADIS system family, complete, comprising chute, input funnel 150 cm3 and connecting cable for RS485. SUBMICRON module, R2, for HELOS/R multi range series, measuring range: 0.25/0.45 – 87.5 micron. TOPMICRON module, R4, For HELOS/BR multi range series, measuring range: 0.50/1.8 – 350 micron. Nilfisk ATTIX 33-2H PC, 230V AC, dust class H Computer system Fujitsu ESPRIMO E957 E90+, i7-7700 3,60GHz, SSD. Fujitsu TFT display 27” Bjljh Nyfcoqz R Tiowl PAQXOS software, for the operation of all Sympatec instruments with TCP/IP communication, for computers with Windows 7 or 10, on data storage media, including documentation and software protection key.

Year of construction: 1996, Condition: good (used), machine/vehicle number: 3.41.6.0411, Hamo T420 cleaning and sterilizing machine APPLICATION Bslodx I Ugeqz R Tijwl For efficient cleaning of various materials and components such as glassware, vessels, filling equipment components and and other parts in the Biotechnology and Pharmaceutical Manufacturing Industry. DESCRIPTION - The l-lamo T-420 Pharmaceutical Washing Machine is equipped with a programmable PC controller control system. - Hamo Pharmaceutical Grade washing machines are designed, manufactured, validated, and documented to the latest GMP standards - The washing machine offers up to 99 fully programmable cycles - Perform up to 99 different phases. - Menu Language German, can be switched Technical specifications: Model T-420 Instr. No 3411 Machine no. 3.41.6.0411 Voltage: 3x400 V 50 Hz Amps: 25 kW: 14.4 Year of construction: 1996 More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Functionality: fully functional, For sale is a used water treatment system from ELIX type Essential 10 Description according to the manufacturer's website: Bwelju Tpbtoqz R Tiel Elix® Essential systems are suitable for laboratories that require an easy-to-use, economical solution for a constant and reliable supply of type 2 water. The patented Elix® electrodeionization technology, in combination with other coordinated water treatment technologies such as pre-treatment, reverse osmosis and irradiation with a bactericidal UV lamp (for Elix® Essential UV systems), produces type 2 pure water of consistently high and reliable quality. Thanks to Elix® modular technology, these systems do not require resin changes and therefore have low and predictable operating costs. Water quality: Type 2 Production volume: 200l/day

Condition: good (used), Year of construction: 2009, Functionality: fully functional, Climate cabinet for stability tests TCS series climate cabinets are specially designed for storage and stability tests in the chemical-pharmaceutical industry. Test chamber volume: 1060 l Temperature range: 0 to +50 °C Humidity range: 20 to 95% r.h. Internal dimensions W x H x D in mm 610 (2x) x 1500 x 585 External dimensions W x H x D in mm Bwolqovpu Shoz R Tijl 1460 x 2105 x 980

Year of construction: 2014, Condition: good (used), Millipore Flow Cxtometer Guava easy Cyte 8 HT year of manufacture 2014 regularly serviced .with PC and software Location Cologne Bwjljiv S Arsqz R Tijl Laboratory closure various equipment available , please request detail list

Condition: used, TECHNICAL DETAILS - Max. heating bath temperature : 99.9 [°C] - Heating bath model : water/liquid bath Bwolqzeu D I H Ee R Tijl - Heating bath volume : 14 [l] - Cooling : No

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Climatic chamber for stability tests TCS series climatic chambers are specially designed for storage and stability tests in the chemical-pharmaceutical industry. Test chamber volume: 1060 l Temperature range: 0 to +50 °C Humidity range: 20 to 95% r.h. Bjlqjvpu I Nsz R Tiowl Internal dimensions W x H x D in mm 610 (2x) x 1500 x 585 External dimensions W x H x D in mm 1460 x 2105 x 980"