Used filtration systems for sale (28)

Condition: ready for operation (used), overall weight: 3,300 kg, pressure: 3 bar, temperature: 100 °C, power: 18.5 kW (25.15 HP), tank capacity: 11,950 l, ATEX reactor manufactured by BACHILLER in stainless steel 316L with agitation and half-coil, with a capacity of 11.950 litres. Peripherals are not included. General characteristics: Manufactured by BACHILLER Material Stainless steel 316L Weight 3300 Kg BODY HALF-COIL Design pressure -1/3 bar 5 bar Test pressure 4,41 bar 8,08 bar Design temperature 100 ºC 150 ºC Capacity 11.950 L 350 L Motor characteristics: Ppodpfxoq Nmvio Aalol Manufactured by ABB MOTORS Power 18,5 kW Frequency 50 Hz Rotational speed 1460 rpm Reducer characteristics: Manufactured by NORD Ratio 22,87 Rotational speed 54 rpm

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Pedpfsx R D Efex Aalepl Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Manufacturer: Usifroid Usifroid Reference : SMJ 100 FPI Type : freeze dryer Number of trays : 2 Surface area per tray : 100 cm x 50 cm 2 air compressors Ppjdpfx Aox R Av Ajaljl 1 refrigeration unit : R22 and 502 1 circulation pump 1 heating system Missing parts : Hydraulic unit Vacuum pump

Condition: used, Year of construction: 1988, Manufacturer : Comber Model: Pharmadry PH 100 Year : 1988 Type : vacuum dryer   Maximum temperature: 99°C Material: 304 and 316 stainless steel (in contact with product). Classification: Atex EEx IIB T4   Main tank diameter : ø 500 mm Main tank depth: 700 mm Power: 4 HP Filter Pressurised receiver tank Tubular heat exchanger   Ppodpfx Asx R Avisalsl Gaskets: new Paint: new Mechanical seal: As is, good condition

Condition: used, Year of construction: 1989, Batch fluidised bed dryer in stainless steel with spray granulation. Manufacturer : Glatt Model: WSG-C200 Year: 1989 Previous use: pharmaceutical Product pan capacity: 700 litres. Product capacity: 200 – 280 Kg Air filtration and heating battery. Bag filtration Heat exchange: tubular Pedpfx Asx R An Soalspl Temperature control: multiple sensors Spraying: yes Watson Marlow peristaltic pump Spray nozzle Frame and tower: 316 stainless steel Electrical cabinet Sold with 2 pans and protective pockets Trolley reverser: available Documentation: available in German Spare parts Valves available Fan not available. Hot water generator / boiler not available

Condition: used, // Sold as is or reconditioned // Vacuum paddle dryer mixer Ppodpex Rz Spjfx Aalsl Used for products such as powders/powdery substances. 316 stainless steel Tank diameter 1000 x 2000 Volume: 1100 litres Jacketed 86 litres / 1 bar - 120°C Heated agitator 235 litres / 1 bar - 120°C Agitation by 8 scraping blades Loading via 400 diameter Discharge 350 diameter with guillotine valves ADF 15 kW motor Self-cleaning filter

Condition: used, - Material: Stainless steel - Pneumatic version / ADF - EX - 2 truncated 400L tanks on trolley (per dryer) model WSG120 / D.1200 / 900 X PF.500 - 1 tank turner common to both dryers - Control cabinet - Safety by 2 explosion membranes coupled to nitrogen gas cylinder Pedpfx Aex Rz Nbjalepl

Condition: used, Year of construction: 1986, Manufacturer: Guedu Year : 1986 Type : Reactor dryer Podpfx Asx Rz Iqjaljpl Engine : hydraulic Reactor volume: 280 L Shell circuit : Tank: 14.6 L / 0.9 m2 Bottom: 13.75 L / 0.55 m2 Corrosion allowance: 1 mm Test pressure (half shell): 12 bar Working pressure (half shell): 6 bar steam Test pressure (tank): 6 bar Working pressure (vessel): 3.99 bar gas and 10 torr vacuum Operating temperature: - 20°C + 160°C Welding coefficient : 0,7

Condition: used, Year of construction: 1997, Micoflow insulator - Glovebox Glovebox insulator The device is unused. Pjdpfx Aevw I Npsalopl with microfilter extraction unit type 112108614A36, flow rate 1870 m³/h with 2 airlocks (for feeding and discharging work materials) Inlet/outlet size: W:400 x D:260 x H:430 mm ilumination 2x glove ports Castors (appliance can be moved) Front panel made of polycarbonate Interior dimensions: W:1200 x D:650 x H:100 mm Machine dimensions: W: 2100 x D: 850 x H: 2100 mm Weight: approx. 400 kg *

Condition: good (used), Year of construction: 1983, functionality: unexamined, 2 pieces 1x Alfa Laval H10-RC Ppsdpfx Aaer Nvg Ssljl 1x Alfa Laval H10

Condition: new, Year of construction: 2025, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. Ppodpsq Nw Uqjfx Aalsl This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Year of construction: 1991, condition: excellent (used), Cartridge filter VelaCart B750 of the company Seitz-Filter-Werke Type: VELAcart B750 - 16H07 DN 080 Year of construction: 1991 Factory No.: 1992 Filter insert: Candle Capacity: 105 litres Clamp screw type: M20 x 85 A2 (10 pieces) Ppodpefbckusfx Aalsl Candles: Quantity: 16 pcs. Length:73 cm Mesh size: 5 x 3 mm (length x width) Container: Permissible operating pressure (bar): Liquid 10 / Gas 10 Permissible operating temperature (°C): Liquid 85 / Gas 85 Dimensions: Height: approx. 1.78 m width: approx. 56 cm Weight: approx. 150 kg In very good condition!

Year of construction: 1988, condition: excellent (used), Cartridge filter of the company Seitz-Filter-Werke Factory No.: 1988 Psdpfx Asfbckwsaljpl Type: S000-31H07 DN 100 Year of construction: 1991 Capacity tank: 243L Screws: M20 x 100A2 (14 pcs.) Container: Permissible operating pressure (bar): Liquid 6 / Gas 6 Permissible operating temperature (°C): Liquid 85 / Gas 85 Candles: Quantity: 31 pcs. Length: 1 m Mesh size: 5 x 3 mm (length x width) Dimensions: Height: approx. 2.13 m Width:approx. 65 cm Weight: approx. 300 kg In very good condition!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Total vessel capacity (L): 62 Ppjdpfxoxxxqvj Aalsl Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Ppjdpfx Aeqzx Dbealjl Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. 7 packages; Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm 5 extra Euro pallets with accessories

Condition: used, Technical details: Sieve diameter: 1000 mm Explosion protection: ATEX certified Equipment: Ppodpfx Aoxv Ai Dealel - Including control cabinet - With ultrasonic equipment - Incl. various sieve frames - Previously used for powder coatings

Condition: used, Technical details: Sieve diameter: 1200 mm Explosion protection: ATEX certified Equipment: - Including control cabinet - With ultrasonic equipment - Includes various sieve frames Ppsdpoxv Ah Hofx Aalel - Previously used for powder coatings

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, Enamelled steel filter nutsche Estrella AG, Switzerland Capacity: 760 litres, filter nutsche, suction nutsche, pressure filter Year of manufacture: 1994 Documentation: complete Operational condition: fully functional Diameter: 1000 mm Filter area: 0.75 m² Permitted operating pressure: -1/+2 bar Permitted operating temperature: -10/+200 °C Support structure: upright on legs with subframe Opening: hydraulic opening assistance Ppsdpfx Aju U Afuealjl Enamel quality: blue colour, Email 2000 Estrella Total volume: 760 litres Overall height open: 2440 mm Height closed: 1590 mm L x W: 2000 x 1300 mm

Condition: used, functionality: unexamined, machine/vehicle number: Infinity GPS-4, Used Aeronex Infinity GPS-4 Gas Purification System Manufacturer: Aeronex Inc. Model: Infinity GPS-4 Description: CDA Gas Purification Cabinets / Auto-regeneration System / Purifiers Max Flow: 130 SLM Max Pressure: 150 PSIG Filtration: 0.003 Micron 220V (EU-standard) Pjdpfx Asxn Nc Ujaljpl

Condition: ready for operation (used), An HPLC separation column YMC for the analysis and purification of chemical substances in liquid samples is available. Phase: C18, particle sizes (analytical): 3µm/5µm, particle sizes (preparative): 10µm/15µm/20µm/50µm, pore size: 12nm, surface area: approx. 330m²/g, carbon content: 14%, pH range: 2–7.5, max. operating pressure: 200bar. An on-site inspection is possible. Ppodpfx Aaoxnbrzjlsl

Condition: ready for operation (used), functionality: fully functional, Plant for the production of ultra-pure water Podpfjw Nn Itsx Aalepl MACHINE DETAILS Control panel: TP177B PN/DP Color EQUIPMENT Drawings Manual

Condition: used, machine/vehicle number: 01, space requirement width: 850 mm, overall weight: 562 kg, total length: 1,700 mm, total height: 1,900 mm, GAF bag filter, container capacity 200 liters, double-jacket capacity 30 liters, permissible operating pressure container 10.5 bar, permissible operating pressure double-jacket 5 bar, operating temperature 150 °C, material in contact with the product stainless steel 1.4435 (V4A). The filter is mounted on a galvanized steel trolley with wheels. Pedpfxjvt Tg Ss Aalepl

Condition: new, functionality: fully functional, machine/vehicle number: AML SKH-445, overall weight: 5,100 kg, pressure: 3.8 bar, filter area: 456 m², space requirement height: 6,361 mm, space requirement length: 4,011 mm, space requirement width: 4,361 mm, Filtration System AML SKH-445 Ppjdow S I Iropfx Aalsl Due to a cancelled order to Russia, Haver & Boecker currently has 4 brand-new compact dust collectors available at a reduced price. 🔹 Material: Stainless Steel 304, ATEX-certified 🔹 Advantage: Compact design – no overhead clearance required for filter replacement 🔹 Insulated: Suitable for temperatures from -27°C to 45°C 🔹 Capacity: 30,000–36,000 Nm³/h per unit A unique opportunity to acquire high-quality dust collection solutions quickly and cost-effectively. Interested? Send us a message for more details!

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. 1 piece control valve, 4 pieces pressure measurement with display, 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, Podpfx Ajf Dc D Healepl 1 piece pre-assembly of the plant in the factory of the contractor,

Year of construction: 1991, condition: good (used), The system has explosion protection EEx dIIA/IIB-T4 Name: Nutsche filter dryer Manufacturer: Rosemund Type: RLF02-648-91 Year built: 1991 Material: Tank, heater and stirrer: 1.4435 Ppjdpfxeiv Id He Aalol Operating pressure: Vessel: - 1 / 6 Bar Coils / Jacket: - 1 / 6 Bar Max. operating temperature: Vessel: - 50 / +150 °C. Coils / Jacket: - 50 / +150 °C. Dimensions: L 1650 x W 1170 x H 2400 mm Empty weight: About 2000 kg Technical doc.: Yes Message: Hydraulic drive 5.5 kW Electric motor: power 5.5, speed 1500 rpm, design V1, protection class IP55 explosion protection: EEx dIIA/IIB-T4 Accessories: A base frame and a hydraulic system Condition: Used-good Price: On request