Used Filling machines & closing machinery for sale (14)

Condition: ready for operation (used), Year of construction: 2008, Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible. Csh7Ahmlv3

Condition: excellent (used), This machine is suitable for capping bottles etc. at speeds of up to 4,200 objects per minute. Uc98Layi The machine can handle bottles with a diameter of 18 - 90 mm.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, - a cap dispenser, - laminar flow, - spare parts, - belt conveyor 2200mm x 40mm, sold without peristaltic pump. Qu93Iodja YOM 2010 EXCELLENT CONDITION

Year of construction: 2015, Condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C Cxxy9D20Hd - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: new, Year of construction: 2023, IMA - Powder Filling Line 1) HYDRA LINEAR BOTTLE WASHER, MODEL 1800-23-B Linear washing machine, suitable for washing glass and/or plastic containers in use in the pharmaceutical industry, ensures the removal of particulate contamination of at least 3 log. (particles such as glass, fibers, oxides, etc.). The machine, at its maximum stated productivity, operates at 20 mechanical beats per minute, ensuring long washing times and low mechanical stresses for the bottles and the machine. Designed and built in accordance with cGMP. Dh8Hpgwjd 2) BLUE GALAXY STERILIZATION TUNNEL, MODEL 1250/FLS. Tunnel is designed to be inserted within a production line requiring a continuous dry heat depyrogenation process for glass containers. The tunnel consists of three main zones: 3) ROTARY TABLE DOWNSTREAM TUNNEL RT 120 Rotary accumulation, sorting or loading table suitable for handling stable cylindrical containers, glass or plastic, in coupling with packaging lines. 4) XTREMA PWD L MICRODOSING MACHINE Bottle filling and capping machine with intermittent linear positive motion with max. speed of 400 bottles/min. Suitable for volumetric dosing of powders, using vacuum-pressure technology, and application of rubber caps. Prepared for integration with a 100% IPC system 5) ALU 400 CAPPING MACHINE Continuous rotary motion machine, with brushless motorization, for applying and edging aluminum caps, with or without Flip-off, on cylindrical capped glass or plastic containers. 6) HYDRA 480 VIAL WASHING MACHINE The HYDRA 480 machine is designed for continuous washing of cylindrical or shaped glass or plastic containers. Includes parts for washing full-size vials. Designed and built in compliance with cGMP parameters. 7) 2-STATION TRAPPER V/600 Automatic trapper for plastic or metal bottles from upstream machine. The machine has two stations and can process 2 trays per station. Each station has an independent mechanical movement that allows picking full trays and storing new ones without stopping production. Machine without painted parts. Stainless steel structure, with stainless steel surface

Year of construction: 2023, Condition: new, Sample filling system of a disinfection liquid bottle filling line for smaller bottles with a filling volume of up to 100ml. The fully automatic filling process includes: Aligning and feeding of the bottles; filling with 2 to 8 filling heads and with high accuracy by anti-drip device; automatic alignment, feeding and capping of the lids / spray caps, single or double sided labeling of the bottles; outfeed and collection of the bottles to a collection table or to the next production station. -Specifications: number of filling nozzles: 4 (can be customized for a surcharge); number of heads for lid positioning and capping: 1, each (can be customized for a surcharge); filling range: 30-100ml; dosing method: by piston pump; accuracy: +/- 1%; speed: max. 2000 bottles/hour, at 100ml max. 500 bottles/hour; label size: L10-350mm, W10-200mm; product contact parts are made from corrosion-resistant AISI 316 stainless steel, plastic/rubber parts are food grade. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. Pgsrh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), With accessories, an inspection is possible. Fdufwods2B

Condition: like new (used), Tube filling and closing machine for plastic tubes. Blykqwucwnk Sealing process with hot air. Output of max. 60 tubes/min. Filling quantity: 2-500 ml. Manufacturer: Obermeyer Floor Space: 240 x 170 x 245 cm

Year of construction: 2020, Condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Models of packaging see appendix - are manufactured by us! Fb9Cklh Perfomance: 5,000 liquid packages per hour depending on container shape and the viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) The dosing range is set when the machine is at a standstill, via the dosing pump control unit. The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given.

Year of construction: 2023, Condition: new, Filling and capping system for aseptic and precise filling and capping of small bottles with small liquid volumes as used for eye drops, nasal sprays, nail polishes, esoteric oils etc. Dosing by piston pump. - Specifications filling and capping system: number of filling nozzles: 4; number of capping heads: 2; filling volume: max. 10ml/bottle; speed in neutral: max. 60 bottles/min; accuracy: = ± 1%; suitable bottles: glass, PP, PE, PVC; product contact parts from stainless steel 316L. Citddzt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 2012, This system consists of filling machine, screwing machine and the transfer from one to the other. Includes two HIBAR Pump 4S3-R2 high-precision dosing pumps and one as a spare part. Formats: 8ml-1000ml. A list of all formats on request. Documentation available. Glass container with pipette: volume: 8ml/28ml/30ml, base dimensions: 28mm/34mm x 34mm/35mm, height: 65mm/67mm/67mm, filling opening: 10mm/10mm/20mm. PET container with pipette: volume: 30ml/50ml/60ml, base dimensions: 32mm/37mm/38mm, height: 68mm/72mm/88mm, filling opening: 10mm/10mm/21mm. PE container with splash: volume: 250ml/1000ml, base dimensions: 56mm x 42mm/85mm x 69mm, height: 140mm/210mm, filling opening: 18mm/19mm. Documentation available. Bl97Ywodhbg

Year of construction: 2000, Condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. Cdu89Wza In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH More technical details you found in the Datasheet.

Year of construction: 2023, Condition: new, Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops, nail polish and other. Infeed by infeed line; possibly from an sorting system upstream (which is not included in this system). The system includes a container unscrambler, which sets the small bottles after the filling into an outfeed line. The system is PLC controlled. - Specifications: max. speed of the machine in neutral: 50 bottles/Minute; filling capacity: 20-60ml; 1.75kW; 6-8bar. All theses specifications are just examples. The final system will be custom-built. - Please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation. Bwcabx2K7Q Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2011, Condition: used, Voltage: 400V, connected load: 5.5kW, including tools, machine was completely overhauled. Cguj0Vta