Used mixer for sale (111)

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Fslhcoymayvsdw Ajpi

Condition: used, Year of construction: 2007, Fabricant : WAM Model : WBHY 550 PO Year : 2007 Type : Ploughshare mixer Total tank capacity: 550 L Useful tank capacity: 518 L Material : stainless steel Folhsziqfmecdw Aspi Number of ploughshares: 4 + 2 blades Spray nozzle: liquid injection Choppers : 2 (ATEX motors: 4 kW) Main motor power: 18.5 kW Machine dimensions: 130 x 230 x 145 cm Weight : 2000 kg Plan to install an electrical box: this request may be subject to a separate quotation

Condition: used, Used Vrieco approximately 300 litre capacity stainless steel conical mixer. Mixing cone measures approximately 1,200mm top diameter x 1,500mm high. Has top mounted electric drive / gearbox for stainless steel screw and stainless steel orbit arm. Has bottom outlet with valve. Unit is mounted in stainless steel frame with (4) legs. Fpjlhcszindmedw Aei

Condition: used, Reportedly unused GEA Niro Soavi model NS3006H homogeniser. Maximum flow rate 50 litre/hr with maximum pressure of 1500 bar. Unit includes pump and local controls. All mounted on stainless steel mobile frame. Fpelhozinb Sscdw Aei

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 12CG001009, Used GEA continuous mixing and granulation system, model ConsiGma1, stainless steel product contact surfaces, with Brabender feeder, twin screw continuous mixer, and fluid bed dryer granulator, with controls, CE and Ex rated, 400 volt, 50 Hz, seiral# 12CG001009, built 2012. Fpslhjtvm Ulscdw Aoi

Condition: used, Chemical Mixer, Stainless Steel Mixer, Chemical Mixer 2000 L, Used Machine Fslhcdwoyc Sfvj Aspi Manufacturer: Chemplex Type: T240 Electrical power: Heating: 20 kW Mixer motor: 3 kW Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Capacity: 2,000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet. Heating is provided by a 20 kW electric bottom heater. The mixer is equipped with a propeller-type agitator. It features a flat lid, which is openable and fitted with a safety grid. The lid includes 4 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a fail-safe (safety closed) function.

Condition: used, STAINLESS STEEL MIXER TANK, STAINLESS STEEL MIXER, ACID-RESISTANT, CHEMICAL INDUSTRY -Design: Flat-bottomed, cylindrical shell, openable lid mixer tank. Heating jacket on the bottom and shell, with the lid opened by a pneumatic cylinder. -Material quality: stainless steel -Overall dimensions: 1500x960x1750mm Fpelhjy Udcxscdw Aji -Internal tank size: diameter 800x800mm -Electrical data: 380V; 1.1kW; 2.5A -Mixer speed: ~100 rpm

Condition: used, Mixing Tank, Pressure Vessel, Used Machine Manufacturer: Robert Hinkel & Co Model: 9601 Volume: 200 L Operating Pressure: 3 bar Electrical Data: 380V; 2.0A; 0.75 kW Overall Dimensions: Ø 850 mm, height 1780 mm Design: Cylindrical tank with shallow-dished top and bottom, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable, secured with a flanged bolted connection. The lid includes a cleaning/inspection opening. Material: Carbon steel with painted surface Fslhcexacl Todw Aspi

Condition: used, Manufacturer: Grenier - Charvet Model: E 15 Year: 1973 ( Conformity certificate in 2001) Type : High viscosity paste mixer   Folhcdjzg Nf Tsw Aspi Motor power : 15 CV - 11 KW Speed variation: mechanical Previous use : Paint 220 L and 440 L vessels Mixing tool: Ø 960 mm butterfly Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm

Condition: used, Year of construction: 1989, Manufacturer: Pendraulik Model : WD R 24 Type: dissolver Year: 1989   Power : 17,5 KW ATEX class : (Ex) e G3 Mixing speed : 400 – 1500 rpm Speed variation : electric Dispersion disc: Ø 300 mm Recommended vessel: Ø 700 – 1000 mm   Fpolhozg Nf Hscdw Asi Mounting: wall or floor standing Sold with 1 bowl (additional units available on request). Vessel clamping: manual and mechanical Total height: 3520 mm Distance between mixing head and floor: 250 mm – 1400 mm   Technical Data available

Condition: used, overall weight: 207 kg, type of input current: three-phase, power: 11 kW (14.96 HP), Silverson FMX50 in-line high shear mixer, serial FMX50/0329. Stainless steel construction with tri-clamp inlet and outlet connections. Driven by ABB M3KP 160MLA2 motor, 11kW, 2936 rpm at 50Hz, 415V (nameplate also lists 400V and 690V options). Motor is ATEX rated Ex de IIB T4 Gb, certified IECEx LCIE 11 ATEX 3087 X / IECEx LCI 09.0008. Maximum working pressure 150 PSIG per unit nameplate warning. Unit weight 207kg. Sold EXW from Radcliffe, Manchester. Fpslhcdozib Dgow Aji

Condition: used, Used Fryma stand agitator with tempering unit Item number: 10897 Type: stationary Overall height: 1930 mm Overall width: 1320 mm Overall length: 1650 mm Leg height: 100 mm Motor: Power: 11-15 kW Speed: 2910 - 3490 rpm Voltage: 50 - 60 Hz Agitator: Dissolver Diameter: 100 mm Shaft length: 260 mm Tank: Volume: 46 L Material (media-contact): 1.4301 stainless steel Inner diameter: 400 mm Outer diameter: 450 mm Cylindrical height: 365 mm Outlet diameter: 22 mm Distance outlet to floor: 450 mm Fpolsyzp Hvohcdw Aji Tempering unit Make: Tool-Temp Overall height: 920 mm Overall length: 720 mm Overall width: 300 mm

Condition: used, Year of construction: 2005, functionality: fully functional, Used Muller model FTHSM 301 stainless steel drum lifter/blender. Suitable for blending, lifting, inverting and swiveling different type of barrels. Total height of column is 3400 mm, maximal lifting height (clamp axis) approx 2700 mm, maximum load up to 150 kg. Fpelhcdwozh Enme Asi Blender has following options: - blending: 2-10 rpm, rotating 360°, manually adjustable clamp inclination up to 30°, adjustable blending time 1-99 min. - inverting: 2 rpm, range 0-180° - lifting/lowering: 3m/min - swivelling: manually, max 350° - has a universal clamp with manual clamping operation by handwheel. Includes control panel.

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Fjlhcjx Axbcjdw Aspi

Condition: used, Used Winkworth approximately 30 litre capacity (product dependant) stainless steel z-blade mixer. (2) stainless steel z-blades driven by 3kw, 3/50, 1450 rpm motor. Fpelhezfigbocdw Aoi Weight: Estimated: Kg1000.0

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Fjlhcdjzfh U Djw Aopi Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. Fpelhcdwezfh Uqs Asi This unit is ready to run. A video of this mixer is available below.

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Fslozd Urgshcdw Aopi

Year of construction: 2010, condition: good (used), Sower mixer disperser Type: SWFS Power: 4 KW Feloi It T Eohcdw Ajpi Year: 2010 Speed: 1500 RPM Weight: ca 600 KG Dimensions: 145x55x165 cm LxWxH

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Fpslhcezcznyodw Aei Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Dimension : 110 x 103 x 150 cm Technical documentation available

Condition: used, Manufacturer : SPXFLOW Lightnin Model : Mi5P10 Year : 2015 Fpjlhcdwezbyp Hj Aji   Type: Pneumatic mixer / stirrer Diameter of the mixing head: 240 mm Length of the stirring shaft: 915 mm Shaft diameter: 25 mm Required pressure: 6 bar Speed variation: mechanical Manual lifting system / counterweight Lifting stroke: 1290 mm Maximum container width: 980 mm Dimensions:> floor to agitator (lower position): 0 mm Dimensions: floor to> top of mixing unit (raised position): 1255 mm Dimension : 1110 x 1300 x 3270 mm   Technical documentation available Video showing the machine in operation in our workshops

Condition: like new (used), Year of construction: 2012, JANKE + KUNKEL TURBOTRON SFH ATEX agitator Generator version with propeller agitator Max. batch size: 200 liters ATEX version Infinitely variable drive up to 1,100 rpm Manufacturer: IKA Year of manufacture: 2012 Space requirement: 170 x 130 x 225 cm Fjlhcdswu Uk Hjw Aepi

Condition: used, Używany poziomy mieszalnik wstęgowy wykonany ze stali kwasoodpornej produkcji WAM GROUP S.p.A. (Włochy) model WNHO2400E/0DK. Pojemność całkowita mieszalnika to 2400 litrów. Pojemność robocza około 1500 - 1700 litrów. Kwasoodporna komora mieszania ma wewnętrzne wymiary: średnica 1210 mm x długość 2000 mm i jest wyposażona we właz inspekcyjny zlokalizowany na ścianie bocznej o wymiarach: szerokość 1200 mm x wysokość 450 mm. Mieszalnik posiada mieszadło z przerywaną, podwójną wstęgom, przeciwnie ukierunkowaną które jest wykonany ze stali nierdzewnej magnetycznej (stal ferrytyczna). Mieszadło jest napędzane przez przekładnię zębatą oraz pasową silnikiem elektrycznym o mocy 18,5 kW, 1470 obr./min, 50 Hz. Robocze obroty wału około 29 obr/min. Urządzenie posiada dolny, centralny wysyp wyposażony w zawór klapowy, sterowany pneumatycznie. Wymiary wysypu: szerokość 220 mm x długość 250 mm. Górna pokrywa mieszalnika jest wykonana ze stali kwasoodpornej i jest wyposażona w centralne przyłącze o średnicy 390 mm. Specifications: Capacity: 2,400 L Material of construction: Stainless steel and magnetic non corrosive steel (ferritic steel) Width: 1,210 mm Horsepower: 18.5 kW Length: 2,000 mm Jacket: No Fjlhszbucnecdw Aepi Discharge Type: On bottom pneumatically operated valve Type Of Ribbon: Interrupted double counter-pitch ribbon screw Revolutions Per Minute: 29

Condition: new, Brand new PERRYmix model HVP 2000 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 2000 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 5.5 kW electric motor via NORD gearbox. - Swing arm driven by 1.5 kW electric motor via NORD gearbox. Material design: Fpjlhjzbub Rocdw Aei - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Options: - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 1000 with stainless steel arm and tilting half-circle top cover)

Condition: new, Brand new PERRYmix model HVP 600 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 600 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 2.2 kW electric motor via NORD gearbox. Fjlhcszbubwedw Ajpi - Swing arm driven by 0.37 kW electric motor via NORD gearbox. Material design: - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Options: - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 300 with stainless steel arm and tilting half-circle top cover)