Used Presses for pharmaceuticals & chemicals for sale (25)

Year of construction: 1999, condition: reconditioned (used), Rotary tablet press EU1"-441 – 29 stations + EU-B – 43 stations This high-performance tablet press is designed for the production of tablets with a maximum diameter of 25 mm using the EU-441 rotor and a maximum diameter of 13 mm using the EU-B rotor. The tablet press is suitable for producing shaped tablets (guided tooling). Technical specifications Max. pressing force: 100.0 kN Pre-compression: 100.0 kN Max. tablet diameter: 13.0–25 mm Max. filling depth: 18.0 mm (with corresponding filling curve) Max. tablet thickness: 8.5 mm Die speed: 15–120 rpm Performance EU-441: 26,100 to 174,000 tablets/h EU-B: 38,700 to 309,600 tablets/h The machine is equipped with four frameless, double-walled plastic doors. This makes the die table easily accessible for cleaning and tool changes. The main drive, gearbox, and a central lubrication system are located in the machine cabinet. At the rear of the machine is a connection for an external exhaust and filter system, which keeps the pressing chamber largely dust-free. Product feed The product is fed in via a stainless steel hopper and directed into the Fill-O-Matic mixing impeller shoe. From there, the dies are filled. The mixing impeller shoe can be easily removed for cleaning. The finished tablets are discharged via a discharge chute and collected. Rejected tablets are automatically separated via a sorting diverter. Monitoring system The machine features a monitoring system with: Tablet jam monitoring Level control Filling hopper monitoring Measurement of the resistance of the punches Ejection force measurement Individual rejection The system enables: Statistical evaluation Documentation via printer Permanent press force monitoring Automatic adjustment of the press force Automatic rejection of defective tablets Quick stop in case of exceeding limit values. Electrical equipment The electrical installation is located in a separate control cabinet, which can be positioned independently of the machine. The following additional devices can be connected: Vertical dust collector Metal detector. Scope of delivery Machine without tableting tooling Filling curves for: EU-441 (10 mm and 12 mm) EU-B (8 mm) The changeover rotor is located on a Fette rotor trolley, which is included in the scope of delivery. If required, a control system upgrade can be offered. Machine and operating manual as well as validation documents are available in German. Condition Approx. 34,000 operating hours Regularly maintained Very good mechanical and visual condition. Hodpfx Ajzl Tigea Ejfi

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Slugger model with 12 station in special tooling Max. compression force of 120KN 16/20 station available in D tooling with 100KN compression force Square model with GMP construction. Optional electro magnetic clutch for Non pharma / heavy duty application ACVFD as an option for the main motor. High torque motor for slugging application. Ideal for Slugging/Effervescent tablets/Veterinary/Non pharma applications. Load cell for compression force monitoring available as an option. Hsdjrrgtropfx Aa Eofi 38mm diameter round tablet compressed with ease.

Condition: used, Year of construction: 2004, Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Feeding screw: 0.1–180 rpm Compaction screw: 1–460 rpm Compaction zone with pressure rollers: 1–30 rpm Granulation zone with star rotor and screen: 0–180 rpm Force: 1 – 20 KN/cm Gap width: 1.0 – 6.0 mm Pressure roller speed: 1 – 30 rpm Roller diameter: 250 mm Roller width: 100 mm Hjdex R Ar Repfx Aa Ejfi Capacity: 60 – 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical, control, and safety cabinets are not available. These items can be quoted separately.

Year of construction: 2004, condition: used, functionality: fully functional, ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 200 Machine for compaction of the raw material is exclusively effected by the press rollers under hydraulic pressure. Specifically for use in the production area. Built in 2004. CHARACTERISTICS - Control system: external control cabinet - Roller diameter: 200 mm - Roller width: 75 mm PRODUCTION - Output: up to 500 kg/h - Maximum pressing force: 20 kN/cm - Maximum roller gap: 5 mm - Maximum roller speed: 38 U/min DIMENSIONS - Footprint: 2,010 mm x 1,245 mm x 1,700 mm - Weight: 2,450 kg - Cabinet size: 2,100 mm x 800 mm x 600 mm Hjdpfxjycw Uvs Aa Eefi - Weight without switch cabinet: 2,050 kg - Switch cabinet weight: 400 kg

Condition: new, Year of construction: 2020, pressing force: 300 t, machine/vehicle number: DF0240 - Rev.00, pressure:300 t passage width:600 mm stroke:500 mm Weight of machine approx.:8,5 t dimensions:ca. 2275 x 1650 x 4050 mm Return Capacity:30 t Engine Output:30 kW Max Working height:800 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec Travel:500 mm Ram plate:600 x 600 mm Table size:600 x 600 mm Table height above ground level (approx.):850 mm Oil Tank Capacity:350 l Oil cooling (electric):1,5 kW (max) ejector stroke:250 mm pressure of ejector:50 t Maintenance Balcony:2.800 ? Drip pan to prevent oil spil:2.800 ? Upper and lower tooling (for 8kgs salt stone):11.000 ? automatic filling with 500 kg depot:58.000 ? speed increase to 80 mm/sec:19.000 Hsdpfxjdxvfkj Aa Eefi every additional meter conveyor belt:850 ? Light barriers front and back:6.800 ? Side trim:4.200 ? 7m roller coaster-for salt stone transport and interim storage:12.900 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Year of construction: 2000, condition: ready for operation (used), Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible. Hedozadmgopfx Aa Ejfi

Condition: used, Year of construction: 2001, functionality: limited functionality, machine/vehicle number: 09-305, overall weight: 4,800 kg, total length: 1,120 mm, total width: 1,300 mm, total height: 1,890 mm, FETTE tablet press in need of renovation. Sold with: - 1 turret change trolley - 1 defective control panel (controls section to be refurbished) Also sold with 2 turrets: - 1 20-station turret (EU1-441 G 10) Tablet output: min 30,000 - max 120,000 Maximum tablet diameter: 25 mm Rotation speed: 25 - 100 min1 Die diameter: 38.1 mm Die height: 23.8 mm - 1 30-station turret (EU 19 H 11) Tablet output: min 45,000 - max 216,000 Maximum tablet diameter: 13 mm Rotation speed: 25 - 120 min1 Die diameter: 24 mm Height Die: 22.22 mm Electric: 400 V Precompression (kN): 50 Compression (kN): 80 Hfodpfxewpu Sys Aa Eji Maximum tablet size (mm): 13 / 25 mm

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: CBR29010, input voltage: 380 V, total width: 1,310 mm, total length: 1,400 mm, total height: 2,280 mm, control cabinet height: 2,200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, overall weight: 4,500 kg, Equipment: documentation/manual, COURTOY R292F Tablet Press Missing the two tablet chutes and the cables between the electrical cabinet and the machine. All documentation, including electrical diagrams, is present (in French). Year: 1999 Serial No.: CBR29010 Punch Type: D Weight (kg): 4500 Production Rate/hour: 43,000 - 350,000 Compression (kN): 100 Precompression (kN): 10 Maximum Tablet Size (mm): 25.40 Hfjdswpuzhopfx Aa Eji Outer Die Diameter (mm): 38.10 Die Height (mm): 23.81 Punch Diameter (mm): 25.40

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm Hodpfx Aogrkigoa Eofi heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0277-Rev06, pressing force: 10 t, pressure:10 t distance between columns:200 mm stroke:200 mm weight of the machine ca.:1,5 t dimensions of the machine ca.:2000 x 1420 x 760 m heating plates :660 x 210 mm :200 mm :200 mm Oil Tank Capacity:70 l Hodpfsffamyex Aa Ejfi Table Height:1100 mm :125 mm Ram Height:250 mm

Year of construction: 2020, condition: like new (used), pressing force: 150 t, pressure:150 t stroke:500 mm Weight of machine approx.:ca. 8,5 t dimensions:1200x1800x3100 mm Engine Output:10 kW Max Working height:1000 mm Approaching Speed max. :9,9 mm/sec Pressure Speed:100t = 9,9 bis 0 mm/sec Table height above ground level (approx.):1000 mm :Schmiernippel column diameter:230 verchromt mm Return Speed:25 mm/sec :500 l demand for oil:ca 400 l Hsdpfx Ajdxvfisa Esfi Maintenance Balcony:5800 ? :3900 ? :2800 ? :4800 ? :29000 ? :8200 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Year of construction: 2020, condition: reconditioned (used), pressing force: 400 t, machine/vehicle number: DF0317, pressure:400 t passage width:600 mm Hedjd E Irhjpfx Aa Eefi stroke:400 mm Weight of machine approx.:14 t dimensions:2380 x 1680 x 3580 mm Engine Output:36 kW Max Working height:750 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec column diameter:230 mm Return Capacity:40 t speed rapid traverse:25 mm/sec Travel:500 mm Oil Tank Capacity:600 l Oil Cooling:1,5 kW :6 m Monitor:WEG 12 Zoll :6800 ? :4200 ? Speed increase to 80 mm/sec.:19000 ? every additional meter conveyor belt:850 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: used, pressing force: 30 t, machine/vehicle number: DF0139, pressure:30 t passage width:1000x1000 mm Hjdpfxsfxykho Aa Eofi stroke:800 mm total power requirement:3 kW weight of the machine ca.:5 t dimensions of the machine ca.:3360x1300x1360 mm return capacity:3 t column diameter:75 mm traversing speed:bis 200 mm/sec. :0-10 mm/s :200 mm/sec table height over floor:900 mm distance table - lower edge of ram:1000 mm :126 mm diameter of piston:71 mm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, pressing force: 20 t, total length: 2,400 mm, total width: 1,500 mm, total height: 2,400 mm, overall weight: 2,000 kg, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, control cabinet length: 60 mm, control cabinet width: 80 mm, height adjustment type: hydraulic, Equipment: documentation/manual, Hidrobrasil Tablet Press – 20 t – C-Frame – Manual Loading Press For sale is a hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of 20 t, specifically designed for applications in the pharmaceutical and chemical industries. The machine is ideally suited for the production of tablets, as well as for precise pressing and forming tasks in smaller batch production and laboratory applications. ==== Technical Data & Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Machine type: Tablet Press - Design: C-Frame / Single-Column Press - Year of manufacture: 2023 - Location: Gelsenkirchen, Germany - Pressing force: max. 20 t - Machine weight: approx. 2 t - Total height: approx. 2,400 mm ==== Working Area - Max. opening width: 500 mm - Stroke / min. opening: 400 / 100 mm - Table height above floor: 800 mm ==== Speeds - Rapid closing: 120 mm/sec - Pressing speed: 5–10 mm/sec ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Pressure accuracy: ±5 bar - Main pump: Gear pump, approx. 10 l/min - Oil volume: approx. 150 l (HLP 46) - Main motor: 22 kW - Total connected load: approx. 6 kW ==== Precision & Stability - Parallelism deviation: ±0.1 mm at 20 °C - Deflection: max. 0.3 mm/m ==== Control & Safety - Control voltage: 24 V DC - Light barriers: SICK / Pilz / Schmersal - Two-hand control, optionally foot control - Safety design complies with EU standards and UVV ==== Equipment - Table top designed as a tray with 50 mm edge and drain - Position adjustment via sensors - Pressure adjustment: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 Hfjdpfx Aetv Ewdja Eji ==== Production & Features - Multi-tool: 8 pressing cylinders - Output: approx. 8–12 parts per minute - Hydraulic unit fully removable for maintenance ===== Tablet production, pharmaceutical industry, chemical applications, laboratory presses, small batch manufacturing Hydraulic press, tablet press, single-column press, C-frame press, pharma press, laboratory press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Year of construction: 2004, condition: used, Used Kilian E 150 PLUS single sided rotary tablet press. Has stainless steel covers. 26 stations capable of up to 16 mm tooling, EU-B of toolings. Manually adjustable fill depth up to 20 mm. Pre-pressing at 23 kN and manually adjustable main pressure up to 100 kN (10 tons). Maximum capacity 162 800 tablets per hour. Stainless steel change-speed forsed feeder. Press is driven by el. Motor 4kW/3ph/400V/50hz with frequency changer. New 2004. Hfodpswm Ar Ajfx Aa Eji

Year of construction: 2007, operating hours: 138 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 900K707385, Tablet Press PRESSIMA – as new, in ex-works condition Hfsdpfxjy Hl Aqe Aa Esi Fully functional machine with complete documentation and software. Including multi-tip tooling set EU-D (5 × 4mm) (purchase price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, in either EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital readout on the machine panel • Digital display of parameters set via handwheels • Note: No automatic control system available Technical Data • Speed: 10–75 rpm • Max main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Two-wheel feeder, variable speed • Drive motor: frequency controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and press area: stainless steel • Press area unpainted, easy access, hard-nickel-plated surfaces • Central extraction port • Central manual lubrication pump for punches • Automatic lubrication pump for punches and guideways • Feeder motor integrated in the headpiece Mechanics • Handwheels for tablet thickness, main pressure, pre-compression, and fill • Rotary flap between fill tube and feeder • Solid pre-compression and main compression stations • Scrapers on upper and lower punches • Magnetic brakes on lower punches • 12 mm fill shoe as standard • Lower punch is lowered after dosing • Lower guideway and ejection rail easily removable • Machine status display on control panel Measuring and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/analysis of: o Main compression (upper) o Main compression (lower) o Pre-compression (upper) o Ejection force o Scraping force o Upper and lower punch displacement • Measuring amplifiers for main, pre-comp, ejection, and scraping force included Equipment / Features • Upper and lower punch shank bores with 4.8 mm keyways for guided tooling • Chamber-type feeder • Turret hard chrome plated • Main compression force measurement incl. indicator on operator terminal • Accessory kit type 8 MX: o 4 EU-B blank dies o 4 EU-D blank dies o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Condition: new, Year of construction: 2026, total width: 1,500 mm, total length: 2,500 mm, total height: 3,200 mm, Rotary tablet press SPT- TP600 2-shift production; Touch screen, PLC control panel; HMI (Human Machine Interface); SPT-TP 600 Number of stations (max.) 16 stations 1 Max. tablet ejection 3000 - 18000 T/h Hfjdpfeuac Sfex Aa Eoi 2 Max. tablet diameter round mm 50 3 Max. Tablet thickness mm 15 4 Max. Main pressing force t 30 6 Dimensions mm 1500 x 2500 x 3200

Year of construction: 2026, condition: new, Rotary Tablet Press SPT-TP 400 with high speed production capacity. High speed production capacity; According to GMP Regulations; Touch screen, PLC control platform; HMI system; SPT-TP 400 Number of station (max.) D=30 B=36 BB=45 1 Max.Tablet output tab/h 125000 170 000 215 000 2 Max.Tablet dia. Round mm 13 16 25 Shaped mm 14 19 25 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 10 Hodpfjdy Dzrsx Aa Eofi 5 Max. Pre compression force Ton 2 6 Machine Dimension mm 1000 x 1230 x 2000

Year of construction: 2026, condition: new, Rotary Tablet Press SPT- TP 500 D with double sided press with 2 layer production. Double sided press; 2 Layer production; According to GMP regulations; Touch screen, PLC control plarform; HMI system; SPT-TP 500D Number of station (max.) D=41 B=49 BB=59 1 Max.Tablet output(double sided) tab/h 270 000 360 000 420 000 Max.Tablet output 2 layer tab/h 90 000 115 000 140 000 2 Max.Tablet dia. Round mm 13 16 25 Shaped 14 19 25 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 10 Hfedpsdy Dz Ajfx Aa Esi 6 Machine Dimension mm 1150 x 1550 x 1950

Year of construction: 2026, condition: new, Rotary tablet press SPT-TPL200 is the small rotary press for R&D and small scale production. According to GMP regulations; Touch screen, PLC control platform; HMI system; Description SPT-TPL 200 Number of station (max.) D=13 B=16 BB=19 1 Max.Tablet output tab/h 46 000 57 000 68 000 Hjdpfx Aody Dziea Ejfi 2 Max.Tablet dia. Round mm 25 16 13 Shaped mm 25 19 14 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 5 5 Max. Pre compression force Ton 1 6 Machine Dimension mm 600 x 1106 x 1705

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Single-Punch Tablet Press Model CPR1 The CPR 1 benchtop press is a single-punch machine designed for tablet production. Powder is loaded into a hopper and directed through a stainless steel tube into the die cavity. The adjustable punch compresses the powder, and the finished tablet is ejected from the machine. The press operates with a continuous motion utilizing cam disks. An operator panel equipped with a tablet counter is included. The machine is capable of producing up to 3,000 tablets per hour. The tablet press can be fitted with tooling for round, oblong, or oval tablets. Punch and die changes can be carried out simply and quickly. All product-contact parts are made of AISI 316 stainless steel. Technical Data Hfedpfoykukqjx Aa Eji Machine dimensions CPR1: 350 x 500 x 720 mm Net weight CPR1: 80 kg Electrical connection: 1 Ph. 230 V. 50 Hz Electrical power: 1.20 kW Tablet output: max. 3,000 tabs/h Tablet size range: 4–20 mm

Condition: used, Year of construction: 1999, GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Hodpfxjx R Amho Aa Eefi Number of positions / stations: 18 Punch type: EU D Max. compression force: 100 kN Max. precompression force: 10 kN Production speed: 15,900 – 79,200 tablets / hour. Ø Max. tablet diameter: 25 mm Outer diameter of dies: 56 mm Die height: 23.81 mm Ø Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.

Condition: used, Year of construction: 1985, Perfecta 1000 rotary tablet press with electrical cabinet Hfodpfx Asx R Awmoa Eei   Manufacturer: Fette Model: Perfecta 1000 / P1000 Year : 1985 Number of pressing stations: 22 Maximum compression force: 80 kN Maximum pre-compression force: 20 kN Maximum tablet diameter: 25 mm Maximum tablet thickness: 10.5 mm Maximum hourly throughput: 72,600 tablets Maximum filling height: 22 mm Pitch diameter: 315 mm Die plate speed: 15-55 rpm Punch shape: EU 1 Die diameter: 38.1 mm Die height: 23.8 mm Punch body diameter: 25.4 mm Upper punch length: 133.6 mm Length of lower punches: 133.6 mm Depth of punch insertion into die: 2 – 6 mm Machine footprint: 1030 x 1090 mm Net weight: 1800 kg Documentation available

Condition: used, Year of construction: 2003, Manufacturer: IMA Kilian Model : E150 plus Hjdpfsx R A Ulox Aa Esfi Version : 26-EU-B Year: 2003 Number of stations: 26 Die type: B Punch type: EU-B / IPT-B Punch configuration : die diameter: 30.16 mm height of dies: 22.22 mm max tablet diameter: 16 mm max filling: 15 mm max main compression: 80 kN max precompression: 23 kN Production rate: 7,800 – 160,000 tablets / h Technical documentation available Weight: 1500kg  

Year of construction: 2025, condition: new, Rotary tablet press for tableting single-layer tablets. Easy punch tool change, quick to clean, low noise operation. Including dust collector, tablet deduster and vacuum feeder. - Specifications: press tool: D; number of punch stations: 15; max. speed of the machine in neutral: 77 cycles/minute (corresponds to approx. 69,000 tablets/hour); max. tablet diameter: 25 mm; max. filling depth: 20 mm; max. precompression force: 12 kN; max. main compression force: 100 kN; product contact parts are made of stainless steel SUS 316L, chassis is made of stainless steel 304; power consumption: 5.5 kW; machine dimensions: 660×690×1620 mm; weight: 675kg. Hsdpjv Nl Sfjfx Aa Eefi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.