Used Other machinery for chemical & pharmaceutical industry for sale (48)

Condition: good (used), Year of construction: 2020, operating hours: 1,960 h, The S2-900 provides exceptional dispensing accuracy and repeatability, and is ideal for high-volume manufacturing. The S2-900 dispenses precise small dots and consistent thin lines, coats and underfills in hard-to-reach areas, has a small footprint that maximizes floor-space, and increases throughput. The S2-900 performs with a wide range of fluids, processes, and substrates and easily integrates with jets and valves from Nordson ASYMTEK. Manual available upon request Note - 1. This is a pair of units with a custom conveyor system used to transfer cartridges between 2 systems. 2. 1 Used and 1 unused pair available 3. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Giolhovm E Nrscdwxet Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Gelhsun S I Tecdwxjit

Year of construction: 2008, Condition: new, Type: XZF / QA90L4A Goljizz D Tshcdwxeit Serial number: Power: 0.33 MPa / 1.5 kW Speed: / 1.390 rpm Diameter top: Weight: 210 kg Dimensions: mm Condition: unused

Condition: good (used), From liquidation of a Swiss pharmaceutical company. They were little used and are in good condition. Shipping worldwide. Lot includes: H30Z 200µ Diamond - Serial # 5805 H30Z 200µ Diamond -Serial # 6288 H30Z 200µ Ceramic - Serial # 5757 H30Z 200µ Ceramic - Serial # 5768 H30Z 200µ Ceramic - Serial # 4393 H30Z 200µ Ceramic - Serial # 6550 H30Z 200µ Ceramic - Serial # 7575 H10Z 100µ Ceramic - Serial # 5752 G10Z 87µ Ceramic - Serial # 5011 F20Y 75µ Diamond - Serial # 5803 P30 200µ Ceramic - Serial # 6239 J30Y 125µ Ceramic - Serial # 5640 HiP - 60F-51HF4 HiP - 60-41HF4 Gelhsn Awxyocdwxoit Microfluidizer® Processors are the gold standard in the industry for applications that require high shear. The fluids that are processed inside the Interaction Chambers™ can travel at velocities of up to 500 m/s, faster than the speed of sound (343 m/s). In addition to the high shear forces, impact forces from collisions with the micro channel walls and with the fluid itself are the other primary forces that assist in particle/globule size reduction. A change of velocity in magnitude or direction exposes the fluid to a high shear field. High turbulence inside the microliter volumes is also responsible for mixing on the nano scale.

Condition: excellent (used), From 2013, with vibrating feeder and four complete tooling sets. Machine was used by Recipharm in the UK. Gjlhcev T Hpasdwxsit

Condition: used, GLATT GPCG 15/25 Drying, granulating, coating, pelletizing Gelhcdjr Hq I Ajwxjit In addition to the WSG PRO, a GPCG PRO offers the possibility of an uninterrupted process thanks to the double chamber filter system. In addition to the drying or pelletizing insert, a Glatt HS sausage insert (bottom spray), a rotor insert (tangential spray) and a CPS insert are optionally available. From sophisticated powder coating to simple drying. Whether granulation / agglomeration, particle coating or pelletizing. Whether the nozzle is used to spray from above (top spray), from below (bottom spray) or from the side (tangential spray): The GPCG PRO masters all important fluidized bed processes.

Year of construction: 2015, operating hours: 15 h, Condition: like new (used), Functionality: fully functional, Mobile vacuum cleaners for laboratories and production Cleanroom vacuum cleaner series CR Safety Change DBGM Pre-separator ES VA Giolhcdov I R R Rswxot

Condition: used, Was in use for powder coatings, fully functional. Golhcjv Tw Sledwxoit Can be inspected in Arnsberg, Germany.

Year of construction: 2010, Condition: good (used), Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until 02/2022 Advanced AE immunoassay technology Meet clinical needs with acridinium ester (AE) technology that provides the flexibility and sensitivity needed for new and innovative assays. Comprehensive diagnostic clarification of various disease patterns thanks to a test menu with over 70 different assays. Simplified inventory management and reduced costs by using the same ready-to-use reagents on all ADVIA Centaur analysers. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded on the fly. Easier training and operation thanks to an intuitive, icon-based user interface. Less operator intervention as daily maintenance is low and the system does not need to be cleaned monthly or booted up daily. New and updated test definitions can be read in by the customer by simply scanning the 2D barcodes included in the usage information. Consistent, predictable turnaround time (TAT) and accuracy Up to 240 tests/hour for short turnaround time even during peak periods. Rapid prioritisation of emergency samples possible at any time thanks to a dedicated access (STAT port). Disposable pipetting tips prevent carry-over and contamination of samples. Automatically perform repeat and confirmatory testing for reactive hepatitis B surface antigen samples using Siemens Healthineers SMART algorithms. Direct connectivity Adapt to different sample volumes with easy connection to Aptio and VersaCell® X3 automation solutions. Efficient operation thanks to diagnostic IT including CentraLink® data management system Atellica Process Manager and Smart Remote Services for Diagnostics Direct pipetting from the automation solution through point-in-space technology. Shorter turnaround times for emergency samples thanks to a dedicated STAT port that allows front loading of emergency samples even when connected to an automation solution. Technical specifications Product specifications System type: Random access immunoassay system Throughput: Up to 240 tests per hour Time to first test result 18 minutes, further results every 15 seconds (method dependent) Method capacity on board: 30 test methods Indication groups§§ Gslhcshr Rw Isdwxsit Allergy, anaemia, diabetes, fertility, hepatitis, HIV, immunosuppressants, infectious serology, cardiology, Bone metabolism, Liver fibrosis, Adrenal function, Oncology, Thyroid diseases, Sepsis, Therapeutic drug monitoring (TDM) Continuous operation Loading and unloading of samples and consumables at any time during continuous operation. This includes sample racks, emergency samples, reagents, ancillary reagents, reaction cuvettes, sample tips, calibrators, controls, wash solutions, water and waste. Samples and sample management: Sample tubes 3 ml, 5 ml, 7 ml and 10 ml tubes, 1 ml and 2 ml secondary tubes, micro tubes Sample supply Universal rack with 5 positions for different types of tubes, total capacity 180 samples; loading and unloading during operation.

Condition: refurbished (used), Refurbished and pressure tested. Lot of 45 flanged safety relief valves, spring loaded. Pressure ratings between 0.5 - 9 Bar. Gijlhcdwsv Dw R Nexet

Year of construction: 2018, Condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. Gijlhcdwofn Iudoxjt 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Year of construction: 2014, Condition: used, Functionality: fully functional, Glatt GCSmart 500 drum coater drum coater in EX version. The machine is in very good condition and fully operational. Giolhsr Hn Ebjcdwxet

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 2469-0719, total width: 980 mm, total length: 1,052 mm, total height: 964 mm, type of input current: three-phase, overall weight: 20 kg, Equipment specifically designed for cleaning engines, engine parts, and accessories. The Motor Clean range is designed to meet the needs not only of automotive repair shops but also of marine and cogeneration engines, the aeronautical industry, and engine grinding and remanufacturing workshops. Gelhcjv Rnx Dedwxeit The products in the Motor Clean range achieve high-quality cleaning, effectively removing all types of sediment: grease, oil, and carbon deposits. Immersion cleaning in an ultrasonic tank achieves high-quality cleaning on any part with hard-to-reach gaps and cavities.

Condition: new, 80 Containers of valves, tanks and pumps Gijlsv H Acvjhcdwxjt

Condition: like new (used), Generates 2.5 m3 of oxygen per hour (95% purity) Gieljvn Nm Rshcdwxot

Condition: used, Manesty – ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP system to guarantee fast return to production In conjunction with our m-tecTM control system, Oystar Manesty provides a fully validatable Clean in Place (CIP) option. From the initial rinse through to compressed air cleaning of solution tubes, the XLTMCota Clean in Place (CIP) was designed to promote fast return to production by eliminating the need for manual cleaning. Simple and fast loading and unloading facility Tablets can be loaded with the front door closed or open using simple load chutes designed to suit different types of containers. Tablets are discharged by reversing the direction of the drum. This method has been proven to be extremely fast and gentle at the same for safe handling of the finished product. Weight : 1590 kg Coater Dimensions : H 2065 x W 1665 x D1475 Spray Guns : 3 Working Volume : 170 L Compressed Air Consumption (5bar from Coater) : 7.9 Air Volume Range (m3/hr) : 1500 – 2500 Main Heater Temperature Range (°C) : 10 – 85 Main Heater Steam Consumption ( kg/hr ) : 117 Goljvlyxrohcdwxeit Sold with : Donaldson Torit – Dust collector DCE DF02 12R

Condition: as good as new (ex-display), Year of construction: 2018, Functionality: unexamined, total width: 40,000 mm, total length: 9,000 mm, total height: 7,000 mm, type of input current: three-phase, IBC unloading and cip station EX with fume ventilation 5 ibc conatiners with driptray 2 product pumps Gelhcdwora Dlpexeit completely 316 stainless never used welding documentation registration available simatic panel

Condition: excellent (used), MAPS equipment for grinding and polishing Here we offer a Struers MAPS preparation system. High capacity Less consumables, less work Unparalleled reproducibility Main features for highest quality and high volume preparation Technical data: Connections: Power: Three-phase Compressed air: 6 bar (90 psi) - consumption approx. 200 l/ min Water: Supply via house connection, disposal via house waste water Size and weight: MAPS preparation modules Height: 1905 mm Length: 1535 mm Depth: 1115 mm Weight: 850 kg Specimen holder Sizes: 160 mm Ø and 200 mm Specimen holding arm Drive motor: 150 rpm, 0.37 kW (0.5 HP) Pressure force: 50-700 N in steps of 10 N Preparation station for plane grinding Main motor 5.5 kW (7.4 PS) Speed: 1450 rpm Grinding stone: Ø 356 mm, grinding width 115 mm Dressing: automatic dresser for the grinding stone circulation cooling unit: 60 l/ min, capacity 65 l Preparation station for fine grinding and polishing Main motor: 550 W (0.7 HP)/ 1.1kW (1.5 HP) Speed: 150/ 300 rpm Grinding/polishing wheels: Ø 300-350 mm Cleaning time: Set by the user. Cleaning method: Water, soap, alcohol, air Cleaning programs: 10 programs with 10 levels each Built-in computer components: Display: LCD display(13 lines of 42 characters each). Data storage: 30 methods with 10 levels each Type: MAPS equipment for grinding and polishing (04593046) SR:4590056 Condition: used / used Gelheg Aivxjcdwxsit Scope of delivery: (see picture) (Changes and errors

Year of construction: 2008, Condition: like new (used), MULLER mobile lifting column/jib with 1/2 rotation of the tank Load capacity 150 Need to be connected to lift Total weight 490kg Sold with 5 tanks: * 1 tank of 100 liters Gelhcdwsv Dtihsxjit * 2 tanks of 200 liters * 1 tank of 150 liters * 1 tank / hopper, with valve for powder, of 90 liters

Year of construction: 2006, Condition: ready for operation (used), Counting capacity: tablets: 2600/h, capsules: 800/h, containers: 30/h, batch capacity: 10000 units, material: stainless steel. Machine dimensions X/Y/Z: approx. 900mm/700mm/660mm, weight: approx. 40kg. Documentation available. On-site inspection is possible. Gielhevzbhyscdwxet

Condition: excellent (used), Functionality: fully functional, Huber Unistat Tango Refrigerated Heating Cooling Circulator -40..+200°C 230V Fully functional, ready to use. Please check out our other listings as well. Golevv Hv Eshcdwxjit

Condition: used, Year of construction: 1990, Manufacturer : Dumoulin Model: 5X Year : 1990 Type : Tablet coater / Drum coater Drum diameter : Ø 50 cm Total volume : 65 L Emptying / removal : frontal Spraying and cleaning nozzles Interior lighting Temperature sensor Watson Marlow 313S peristaltic pump Gielhovlzxgjcdwxjt Gerbhardt and Ebmpapst ventilation and suction Mobile chasis: 4 wheels

Condition: excellent (used), MAPS equipment for grinding and polishing Here we offer a Struers MAPS preparation system. High capacity Less consumables, less work Unparalleled reproducibility Main features for highest quality and high volume preparation Technical data: Connections: Power: Three-phase Compressed air: 6 bar (90 psi) - consumption approx. 200 l/ min Water: Supply via house connection, disposal via house waste water Size and weight: MAPS preparation modules Height: 1905 mm Length: 1535 mm Depth: 1115 mm Weight: 850 kg Specimen holder Sizes: 160 mm Ø and 200 mm Specimen holding arm Drive motor: 150 rpm, 0.37 kW (0.5 HP) Pressure force: 50-700 N in steps of 10 N Preparation station for plane grinding Main motor 5.5 kW (7.4 PS) Speed: 1450 rpm Grinding stone: Ø 356 mm, grinding width 115 mm Dressing: automatic dresser for the grinding stone circulation cooling unit: 60 l/ min, capacity 65 l Preparation station for fine grinding and polishing Main motor: 550 W (0.7 HP)/ 1.1kW (1.5 HP) Speed: 150/ 300 rpm Grinding/polishing wheels: Ø 300-350 mm Cleaning time: Set by the user. Cleaning method: Water, soap, alcohol, air Cleaning programs: 10 programs with 10 levels each Built-in computer components: Display: LCD display(13 lines of 42 characters each). Data storage: 30 methods with 10 levels each Type: MAPS equipment for grinding and polishing (04591046) SR: 4590055 Gelhcdwsg Aivfjxjit Condition: used / used Scope of delivery: (see picture) (Changes and errors

Year of construction: 2013, Condition: ready for operation (used), Output: 1000/min, number of cameras: 2. On-site inspection is possible. Giolhcdoucfxaewxjt

Condition: excellent (used), MAPS equipment for grinding and polishing Here we offer a Struers MAPS preparation system. High capacity Less consumables, less work Unparalleled reproducibility Main features for highest quality and high volume preparation Technical data: Connections: Power: Three-phase Compressed air: 6 bar (90 psi) - consumption approx. 200 l/ min Water: Supply via house connection, disposal via house waste water Size and weight: MAPS preparation modules Height: 1905 mm Length: 1535 mm Depth: 1115 mm Weight: 850 kg Specimen holder Sizes: 160 mm Ø and 200 mm Specimen holding arm Drive motor: 150 rpm, 0.37 kW (0.5 HP) Gislhcdsg Aitcjwxet Pressure force: 50-700 N in steps of 10 N Preparation station for plane grinding Main motor 5.5 kW (7.4 PS) Speed: 1450 rpm Grinding stone: Ø 356 mm, grinding width 115 mm Dressing: automatic dresser for the grinding stone circulation cooling unit: 60 l/ min, capacity 65 l Preparation station for fine grinding and polishing Main motor: 550 W (0.7 HP)/ 1.1kW (1.5 HP) Speed: 150/ 300 rpm Grinding/polishing wheels: Ø 300-350 mm Cleaning time: Set by the user. Cleaning method: Water, soap, alcohol, air Cleaning programs: 10 programs with 10 levels each Built-in computer components: Display: LCD display(13 lines of 42 characters each). Data storage: 30 methods with 10 levels each Type: MAPS equipment for grinding and polishing (04593046) SR:4590062 Condition: used / used Scope of delivery: (See picture) (Changes and errors