Used machining centers (vertical) X-axis travel 600-699mm for sale (240)

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 182823025, functionality: fully functional, operating hours: 2,417 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 650 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 400 kg, controller manufacturer: Heidehein, overall weight: 13,000 kg, controller model: TNC640, nominal power (apparent): 60 kVA, rapid traverse Z-axis: 1,417 m/min, rapid traverse X-axis: 1,417 m/min, rapid traverse Y-axis: 1,417 m/min, workpiece diameter (max.): 500 mm, operating hours of spindle: 2,417 h, Equipment: documentation/manual, Perfect running machine, 5 axle G6 Axile. Bodpevumzxjfx Akneww Can be shown in running condition.

Condition: repair required (used), Year of construction: 1999, operating hours: 5,050 h, functionality: limited functionality, machine/vehicle number: 2885-0681, total height: 2,540 mm, total length: 1,900 mm, total width: 2,530 mm, Equipment: documentation/manual, Product CNC machining center Brand Deckel Maho Type DMC 63V Measurements WxDxH approx. 190x253x254 cm Year volgens opgave 1999 Specifications Bods Aguunepfx Aknjww Serial number 2885-0681, operating hours: 5,050. Siemens control system. Please note: The circuit board is defective; a replacement part is included and is part of this lot. The machine has been disconnected from the power supply and all fluids have been drained. Details Please note! The buyer is responsible for providing lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: excellent (used), Year of construction: 2022, operating hours: 798 h, functionality: fully functional, machine/vehicle number: S102221332GKBCP, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, torque: 74 Nm, total height: 2,564 mm, total length: 3,264 mm, total width: 2,930 mm, overall weight: 2,850 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 98 h, spindle nose: SK 40, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HURCO VM10i Bedpfx Aez Ei Amjknoww A vertical machining center in compact format, in almost new condition. !!! 98 operating hours of the spindle !!! Work area Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniformly distributed) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Feed rate Rapid traverse X-axis / Y-axis / Z-axis 28 / 28 / 28 Main spindle Spindle taper (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Tool changer Magazine slots 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Includes coolant tank (62 liters) and chip conveyor, as well as extensive accessories (machine vises, chucks, software for processing DXF files). An inspection is possible at any time. The Hurco is currently still connected and can be tested.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,742 mm, total width: 2,265 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 6,000 g, product length (max.): 2,441 mm, number of axes: 3, This 3-axis DMG MORI DMC 635 V ecoline was manufactured in 2014. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMC 635 V ecoline vertical machining centre we have for sale. Contact us for further details. - Control: HEIDENHAIN TNC 620 (MC 7420D / TE 7150 keyboard / SLIMline panel)- Number of Axes: 3 (X, Y, Z)- X-Axis Travel: 635 mm- Y-Axis Travel: 510 mm- Z-Axis Travel: 460 mm- Table Clamping Surface: 790 x 560 mm- Max. Table Load (Center): 600 kg- Table T-Slots: 4 / 14H12, distance 100 mm (1 reference slot 14H7)- Table Height from Floor: 720 mm- Spindle Speed Range: 20 - 12,000 rpm (1/min)- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 83 Nm / 57 Nm- Tool Taper / Interface: SK40 (DIN 69871 / ISO 7388/2 Type A or DIN 69872 Form A/B)- Tool Clamping Force: 8 kN- Tool Magazine Capacity: 30 stations- Max. Tool Diameter (Adjacent Empty / Full): 130 mm / 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 6 kg (Max. total magazine tool load: 90 kg)- Rapid Traverse (X / Y / Z): 30 m/min- Feed Rate (X / Y / Z): Continuously programmable up to 20,000 mm/min- Positioning Resolution / Uncertainty: 1 µm / 16 µm (VDI/DGQ 3441)- Coolant Tank Capacity: ~120 l- Machine Weight: ~3,900 kg (3,950 kg with 30-tool magazine)- Apparent Power: 17 kVA- Nominal Line Current (In max): 28 A- Main Fuse: 35 A (Short-circuit breaking capacity: 0.35 kA)- Power Supply: 400 V AC (3/N/PE), 50/60 Hz- Control Voltage: 24 V DC / 230 V AC- Pneumatic Supply Pressure: 5.5 - 8.0 bar (Air consumption: 30 m³/h without blow-off; +20 m³/h continuous)- Machine Dimensions (W x D x H): 1,880 mm (2,265 mm with coolant tank) x 2,441 mm x 2,742 mm (Transport height min: 2,330 mm)- Required Floor Space: 4,500 x 4,400 mm Technical Specification Taper Size SK 40 Bwode Agb Uvspfx Aknew

Condition: used, Year of construction: 2011, operating hours: 19,500 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Siemens, controller model: Siemens 840D SL, overall weight: 34,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 70 bar, spindle nose: SK 50, number of slots in tool magazine: 320, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Universal Machining Center REIDEN BFR 24 – 4000 mm – TOP Configuration For sale is a high-precision 5-axis universal machining center REIDEN BFR 24 from 2011, in very good condition. The machine comes from industrial production and is ideally suited for machining large and complex workpieces in machine, tool, and mold making. Due to its robust design and high-quality Swiss manufacturing, the REIDEN BFR series offers the highest precision, stability, and reliability. ⚙️ Technical Data Manufacturer: REIDEN (Switzerland) Type: BFR 24 Year of construction: 2011 Control: Siemens 840D sl Axes: 6 (simultaneous machining possible) Travel distances: X: 4000 mm Y: 1000 mm Z: 1200 mm B-axis: ±120° C-axis: 360° Spindle: Mount: SK50 Power: 45 kW Speed: up to 7,000 rpm 🧰 Equipment / Accessories Bjdpfjzhnl Ujx Aknoww ✅ Tool magazine with 320 positions ✅ approx. 500 SK50 tool holders (!!) ✅ Pallet changer with 3 pallets ✅ Internal coolant system 70 bar ✅ Measuring probe Blum ✅ Stationary table 1600 x 2350 mm ✅ Magnetic/vacuum clamping plate 1050 x 2240 mm ✅ Chip conveyor ✅ various hydraulic lines, renewed in 2023 🚚 Other Machine can be inspected while powered on Machine is available from January 1, 2027 Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase contract (legally required) Sales / Transfer conditions: • Dismantling, removal, and transportation are the responsibility of the buyer and at his risk. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your response in order to coordinate the further details directly.

Condition: excellent (used), Year of construction: 2019, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Sinumerik, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece weight (max.): 600 kg, table load: 600 kg, overall weight: 5,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,200 h, coolant supply: 12 bar, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bertikales BAZ DMG MORI CMX 600 Year of manufacture: 2019 Control system: DMG MORI SLIMline® Multi-Touch control Operating hours: 19,200 h Spindle hours: 9,200 h Coolant pressure: 12 bar Technical data: Spindle speed: 10 - 12,000 rpm Drive power: 9/13 kW Torque: 54/80 Nm Tool holder: SK 40 Number of magazine positions: 30 Travel ranges: X-axis: 600 mm Y-axis: 560 mm Z-axis: 510 mm Direct path measuring system in all axes Production package 1 Bwjdpfxoz Ihums Aknew

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 13064, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 400 kg, total height: 2,380 mm, total length: 2,600 mm, total width: 2,200 mm, table width: 450 mm, table length: 800 mm, table load: 400 kg, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,620 h, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 24, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, LILIAN SVM-60 3-axis machining center Year of manufacture: 2012 Bedszi N Aqopfx Aknjww Travel ranges (X x Y x Z): 610 x 460 x 510 mm Control system: Heidenhain TNC620 Including option for probing cycles and thread cutting without compensation chuck RS232 / RJ45 interfaces Dual-arm tool changer with 24 tools Direct-drive spindle, oil-cooled, 12000 rpm SK40 tool holder, DIN 69871 Rapid traverse X+Y 36 m/min, Z 30 m/min Heidenhain glass scales X+Y+Z Heidenhain TS 440 probing system Handwheel Enclosure with sliding door Work area lighting Coolant system Oil mist extraction Automatic central lubrication 3-color alarm and status indicator 400V/50Hz, 15 KVA Compressed air requirement: 6 bar Weight: 4000 kg Dimensions W x D x H: 2200 x 2600 x 2380 mm Control system operating hours: 18780 hours Spindle running time: 5620 hours Optional: Various clamping tools SK40 (milling chuck, threading chuck, drill chuck, shrink-fit chucks, turning tool holders, etc.) Allmatic machine vise

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm, spindle cooling). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle hours. Machine can be connected and tested on-site. Bjdpfszr Rugox Akneww

Condition: used, Year of construction: 2002, machine/vehicle number: 810715, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 810D, table width: 500 mm, table length: 800 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: DC, Equipment: chip conveyor, documentation/manual, Vertical machining center DECKEL MAHO DMC 63V Year of manufacture: 2002 Machine number: 810715 Condition: Used Delivery terms: Free on truck Location: 57482 Wenden Availability / Collection date: The machine is expected to be available in November 2026 and must be collected on a fixed date to be agreed upon (likely in calendar week 48-2026). Payment terms: Payment in advance - by bank transfer Internal no.: 181-1 Can be inspected while running: Yes Technical data: Control: Siemens Sinumerik 810D Tool holder: SK 40 Operating hours: 76,500 (will increase slightly, as the machine is still in production until collection) Spindle hours: 24,100 (will increase slightly, as the machine is still in production until collection) Travel distances X / Y / Z: 630 / 500 / 500 mm Table dimensions: 800 x 500 mm Table load: 500 kg Tool changer: 24-position Feed rate in X / Y / Z: 30,000 mm/min Rapid traverse rate in X / Y / Z: 30,000 mm/min Spindle speed max.: 10,000 High-pressure coolant system Chip conveyor 400 V / 30 kVA / 50 Hz Scope of delivery: Available manuals The hydraulic vices, the associated hydraulic unit, the tool holders, and the zero-point clamping system are not included in the scope of delivery! Dimensions & Weights: Installation dimensions L x W x H approx.: 4000 x 3000 x 2650 mm Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►Upon request, we can offer transport to the destination. Bwodpfx Aksz Nhizjnsw ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 - X-Axis Travel: 760 mm - Y-Axis Travel: 610 mm Bwedpfx Aezvf Sujknsw - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg

Condition: good (used), Year of construction: 2017, operating hours: 46,510 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, overall weight: 6,650 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 7,658 h, number of slots in tool magazine: 20, Equipment: chip conveyor, Control system: Heidenhain TNC 640 Table surface: 1,100 x 570 mm Max. table load: 1,000 kg Rapid traverse rate X / Y / Z: 42 m/min Chip conveyor Measuring probe Bjdpfxs Afymvs Akneww Internal cooling lubricant system (IKZ)

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Bsdpo Af Nzuefx Aknoww - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, resulting in very few spindle operating hours! - Pallet dimensions: approximately 320 x 320 mm Bwsdjy Tvcuepfx Aknow - The pallets are clamped onto the rotary table - Tool holder: HSK-E 40 - For further technical data, see the images - With technical documentation - With HSK-E 40 tool holders and three pallets Attention: The item must be picked up between July 21st and July 23rd, 2026, on a date to be confirmed. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: excellent (used), Year of construction: 2013, operating hours: 10,326 h, functionality: fully functional, machine/vehicle number: +.1035, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, overall weight: 4,800 kg, spindle speed (min.): 14,000 rpm, operating hours of spindle: 10,326 h, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, Mikron VCE600Pro Excellent condition!! Year of manufacture: 2013 Spindle hours: 10,326 Control system: Heidenhain iTNC530 DXF file import Handwheel Travel distances: X-axis: 600 / Y-axis: 500 / Z-axis: 540 Spindle: SK40 with 14,000 rpm 24-position tool changer Regulated spindle cooler IKZ internal cooling Band filter Air cooling through the spindle Spray ring for spindle ISO/BT 40 Direct measuring system / linear scales Tool - laser measurement Renishaw 3D probe Renishaw OMP40 Bodpfx Akez Saglsneww Chip conveyor Top condition / without the vises shown in the pictures.

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Bwodpfx Akszd Agrsnew Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 12 m/min, controller manufacturer: Fanuc, controller model: Series 16i-M, workpiece weight (max.): 300 kg, total height: 3,140 mm, total length: 2,785 mm, total width: 4,825 mm, table width: 450 mm, table length: 700 mm, table load: 300 kg, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, spindle nose: MAS 403 - BT40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: documentation/manual, This is a very high-quality, 3-axis CNC jig boring machine/machining center from the Japanese manufacturer YASDA, specializing in extremely precise machining. The YBM-640V is primarily used for: Die and mold making. Precision components for the aerospace, medical, and semiconductor industries. Workpieces requiring tolerances of just a few micrometers. The machine comes from a very high-end machining company where it has always been perfectly maintained and is still in excellent mechanical condition, befitting YASDA's standards. Measurement reports are available upon request, and the machine can be inspected in working order by appointment. Additional options & accessories: Electronic handwheel Renishaw OMP60 workpiece probe. Filtermist extraction system. Bedpfszrm N Tox Aknjww Weight & dimensions approx. 7,500 kg approx. 2785 x 4825 x 3140 (L x W x H)

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, CNC Vertical Machining Center “DECKEL MAHO M 1” With Siemens 828 D Shop Mill control Year of manufacture: 2022, Commissioning: 9/2023 Travel ranges: X 550, Y 550, Z 510 Spindle speed range: 20 – 12,000 rpm, stepless With the following accessories: Fixed angular table, 850 mm x 650 mm clamping surface Vertical tool changer with 24 magazine positions (SK 40) IKZ 20 bar Electronic handwheel 3D measuring probe Renishaw PP 40 Tool length measurement Renishaw TS27R Full protection enclosure with sliding doors and interior lighting Coolant system Chip conveyor Oil mist extraction Coolant spray gun 3 adjustable machine feet Operating manuals Bwsdpfoz A D Dmjx Aknjw THE MACHINE IS IN EXCELLENT CONDITION!

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, overall weight: 10,700 kg, Control unit defective, can be used as a source of spare parts. For self-collection. Details see attachment and available upon request. The following parts have been removed: Axle control module Bodpfez Atpnox Aknjww PCU Control unit for cooling system

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530 control unit, Working area X 600 x Y 450 x Z 450 mm Spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle Bsdez Hm Dkopfx Aknoww Machine weight 6,100 kg, Connection 16 kW Fuse rating 32 A Operating voltage 400 V, 50/60 Hz

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm Bjdszzyg Dopfx Aknoww z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) drive power: 7,5 kW total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. 4-axis CNC machining center with pallet changing system – 2 workstations (A/B), each equipped with its own CNC-controlled 4th axis and chuck. A particular advantage of this machine is its swivel table: Equipped with a swivel table, the S6040 allows workpieces to be loaded and unloaded while machining is in progress. This significantly increases the machine's productivity. The swivel time is only 3.0 seconds. *

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Bwjdpszcpu Ijfx Aknew Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: excellent (used), Year of construction: 2014, DMG MORI Bjdpfx Aksxgk Nmoneww DMC 635V ecoline Year Built 2014 Control : Heidenhian Spindle 12,000rpm Taper : BT40 ATC 30

Condition: excellent (used), Year of construction: 2007, DMG DMC 1035 V Machining Center DMG DMC 1035 V with Heidenhain ITNC 530 Control, Year 2007, in Excellent Original Condition The machine comes from the toolmaking department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2007 Technical Details X-travel: 1,035 mm Y-travel: 560 mm Z-travel: 510 mm Control: iTNC 530 Heidenhain Main Spindle: Speed Range (Main Spindle): 20 – 8,000 min⁻¹ Drive Power (Main Spindle): 13 / 9 kW Tool Holder BT 40 Draw Bar: ISO 7388-3-A AD40 Work Table: Clamping Surface: 1,200 x 560 mm Max. Table Load: 1,000 kg Table Height above Floor: 720 mm T-slots: 5 x 14 x 100 Tool Changer: Number of Tool Stations: 20 Max. Tool Diameter: 80 mm Max. Tool Diameter with free adjacent slot: 130 mm Max. Tool Length: 300 mm Max. Tool Weight: 6.0 kg Tool Change Time: 1.6 sec Chip-to-chip Time: 7.0 sec Feeds: Feed Rate: 24,000 mm/min Rapid Traverse: 30 m/min Connected Load: 20 kVA Machine Weight approx.: 4.5 t Required Installation Space approx.: 4.0 x 4.0 x 2.5 m About the machine: Bodpexqgrxsfx Aknsww Offered here is a DMG DMC 1035 V machining center with a Heidenhain ITNC 530 control. This machining center is in excellent original condition. It comes from a facility where it was used primarily for training purposes, meaning minimal hours of operation. The control is very easy to operate. The guideways are regularly lubricated by centralized lubrication. The DMG DMC 1035 V has been mechanically and electrically inspected by us. Take the opportunity to visit and inspect the DMG DMC 1035 V under power at our premises. You will find further milling machines from leading manufacturers on our website.

Condition: good (used), Year of construction: 2001, functionality: fully functional, operating hours: 4,550 h, Controller SIEMENS SINUMERIK 810/840D Table size 800 x 500 mm Table load 500 kg X travel 630 mm Y travel 500 mm Z travel 500 mm Spindle speed 8000 rpm Tool holder type SK40 ATC magazin 24-fold Repid speed 30 m/min Weight 4500 kgs Dimensions LxWxH = 3100 x 2100 x 2400 mm Bsdpfx Akoy T I Ayensww Accessories - Coolant tank - Manuals The machine was used barely. Good condition.

Condition: used, Year of construction: 2006, Equipment: documentation/manual, Control Fanuc 0M Two palletes Table dimensions – 650x420 mm Bodpfx Akezxxv Esnsww Axes: X 580mm, Y 420 mm, Z 490 mm Spindle 12 000 rpm, SK40 Machine dimensions 2500 x 2100 x 2500 mm Machine weight 3900 kg