Used machining centers (universal) over 1000mm X-axis travel for sale (141)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,315 h, functionality: fully functional, machine/vehicle number: 4445, travel distance X-axis: 2,320 mm, travel distance Y-axis: 1,980 mm, travel distance Z-axis: 860 mm, controller model: Siemens Sinumerik 840D sl, spindle speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €425,000 plus VAT! Note: This sale concerns the sister machine of the identical Hamuel Reichenbacher machine that was recently auctioned. TECHNICAL DETAILS Travel distance X1/X2 axis: 2,320 mm Travel distance X3/X4 axis: 2,320 mm Travel distance Y1/Y2 axis: 1,980 mm Travel distance Z1/Z2 axis: 860 mm Fjdsztxczopfx Akvsgf Rotational range B1 axis: ±181° Rotational range B2 axis: ±181° Rotational range C1 axis: ±361° Rotational range C2 axis: ±361° Spindle speed: 40,000 rpm Tool holder: HSK-E40 Spindle power: 7 kW Number of spindles: 2 Travel speed in X direction: 90 m/min Travel speed in Y direction: 45 m/min Travel speed in Z direction: 90 m/min Number of tools: max. 6 Tool diameter with 4 tools: max. 40 mm Tool diameter with 2 tools: max. 240 mm Tool length from reference plane: max. 270 mm Tool weight: max. 2 kg Total weight of all tools: max. 24 kg MACHINE DETAILS Control system: Siemens Sinumerik 840D sl Compressed air supply Compressed air quality: according to DIN ISO 8573-1 Pressure: min. 7 bar Air volume flow: approx. 1,000 Nm³/min Voltage: 400 V (±5 %) Frequency: 50 Hz Mains connection: 3 phases, neutral conductor and protective conductor Short-circuit strength Ic: 17 kA Dimensions & Weight Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm Machine weight: approx. 15.0 t Operating Hours Spindle hours, spindle 1: 7,872 h Spindle hours, spindle 2: 7,315 h EQUIPMENT Chip conveyor Hexagon 3D measuring probe Note: Further technical details can be found in the attached offer. Clamping devices and tools are not included in the offer.

Condition: used, Year of construction: 1999, AXA VHC-2-M E vertical / horizontal machining centre X-axis travel mm 2.360 Y-axis travel mm 500 Z-axis travel mm 630 B-axis degrees -90 / +90 (Index 2,5°) Rapid traverse m/min 25 (X / Y) Table dimensions mm aprox. 2.400x600 Max. spindle speed rpm 6.000 Tool holder / taper SK 40 DIN 69871 A Tool magazine capacity 22 Fgsdpfxeztkzpe Akvof

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen Fgjdpfszta I Ejx Akvef • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm Fsdpfx Ajzta Ilskvjgf • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: good (used), Year of construction: 2002, functionality: fully functional, Technical details x-travel 2800 mm y-travel 2200 mm z-travel 800 mm Control Heidenhain iTNC 530 table surface area 3000 x 1200 mm tool taper HSK-A-63 spindle turning speed range 18000 U/min power capacity 18 kW feed range 35000 mm/min total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Additional information The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Fsdpozruchjfx Akvegf Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Condition: excellent (used), Year of construction: 2012, Equipment: chip conveyor, Spinner U5-1520 5-axis machining center Control system: Heidenhain 620 Year of manufacture: 2012 Table dimensions: 2-part – fixed 920x540 mm / rotary round table 650x500 mm (with enlarging ring) Travel in X-axis: 1,520 mm Travel in Y-axis: 520 mm Travel in Z-axis: 420 mm Spindle mount: ISO 40 Spindle speed: 12,000 rpm Automatic tool changer: 32 positions Spindle motor power: 15 kW Net weight approx.: 10,000 kg Accessories: Fedpfjztv Ihjx Akvjgf Internal cooling system with paper band filter Chip conveyor Handwheel

Condition: good (used), Year of construction: 2016, Vertical machining center Machine type: DMG Mori Ecomill 1100 V Control: Siemens 840 Dsl -Operate Year: 2016 SPECIFICATIONS Travel X-Axis: 1.100 mm Y-Axis: 560 mm Z-Axis: 510 mm Rapid motion: (X/Y/Z): 36 / 36 / 30 m/min. Spindle speeds: 12.000 rpm Spindle motor: 13 kW Torque: 82 Nm Tool: SK 40 Toolchanger Tool capacity: 24 Table size: 1.400 x 560 mm Fgsdpfjzrm H Sex Akvef Max. Table Load: 1.000 kg Equipment Chip conveyor Cooling pumps Internal cooling: 17 Prod. Pack 1 bar

Condition: excellent (used), Year of construction: 2015, operating hours: 1,300 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,400 mm, controller manufacturer: Heidenhain, controller model: 530 iTNC, table load: 6,000 kg, overall weight: 32,000 kg, coolant supply: 60 bar, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, KEPPLER HDC 3000 5-axis simultaneous machining Operating hours: approx. 20,500 h Spindle hours: approx. 1,350 h Control system: Heidenhain iTNC 530 - Electronic handwheel HR 550 FS with wireless transmission Spindle: HSK 100, 10,000 rpm, 200 Nm Tool changer: 40-position Coolant pressure increased to 60 bar External blow-off system Internal blow-off system, 5 bar coolant pressure (air) 3D measuring probe RMP 60 KinematicsOpt activated Calibration sphere with stand Chip conveyor Working area: X-axis: 3000 mm Y-axis: 2000 mm Z-axis: 1400 mm NC milling head (A-axis): - max. swivel speed 1 rev/s - max. acceleration 7 rev/s² - motor torque 700 Nm - clamping torque 2000 Nm - positioning accuracy + 6 - swivel angle +185° NC milling head (B-axis): - max. swivel speed 1 rev/s - max. acceleration 7 rev/s² - motor torque 1300 Nm Fedpsztmg Uofx Akvjgf - clamping torque 4000 Nm - positioning accuracy 6 - swivel angle ±185° Machine table: lxb 1600x2250 mm, table load: 6000 kg Table extension: 375 x 1600 mm Net list price: €510,000 Available very soon Disassembly and loading onto a truck are possible.

Condition: excellent (used), Year of construction: 1999, Control system: Heidenhain TNC 426 Travel ranges X/Y/Z: 1250 x 880 x 800 mm Fgodjzqv A Tjpfx Akvof Spindle speed: 8,000 rpm Tool magazine for 60 tools, SK 50 Universal milling head +0° / -90° indexing NC rotary table 1250 x 1000 mm Chip conveyor Measuring probe

Condition: excellent (used), Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Siemens 840 D tool adaptor SK 40 spindle turning speed - stepless 2 U/min feed speeds mm/min tool change unit 16 surface area 700 x 500 mm workpiece weight max. 500 kg weight of the machine ca. 4,4 t Overall size 2,8 x 2,6 x 2,5 mm Full coverhing/ housing Fgodezawmajpfx Akvef cooling device, handwheel only about 1.500 h

Condition: good (used), Year of construction: 2006, functionality: fully functional, x-travel 2500 mm y-travel 920 mm z-travel 820 mm Control Heidenhain iTNC 530 table surface area 3100 x 900 mm table load 3,0 t tool taper HSK-A63 spindle turning speed range20 - 18000 rpm rapid traverse (X,Y,Z) 100 / 60 / 60 m/min main drive (S1/S6) 35 / 25 kW total power requirement 92 kVA weight of the machine ca.25,6 t dimensions of the machine ca. 10,3 x 6,2 x 3,3 m Fgodpfezclwlox Akvjf Operating hours: 113475 Spindle hours: 58183 (June 2026) * 4-axes controlled * CNC control HEIDENHAIN iTNC 530 * Autom. swivel-type milling head (B-axis) +/- 105 deg. * 120-station ATC * Chip conveyor * Tool measuring device (laser) * Measuring probe (workpiece) * Electronic handwheel * Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, AXA Fgedpfx Aezrgz Ajkvof VHC-2-1760-XTS

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, controller manufacturer: Heidenhain, overall weight: 12,000 kg, coolant supply: 20 bar, number of slots in tool magazine: 36, Equipment: chip conveyor, documentation/manual, Manufacturer: MATEC Model: 30 HV Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Technical data Fjdezq T Efepfx Akvegf Travel in X: 3,000 mm Travel in Y: 800 mm Travel in Z: 800 mm Universal machining center with 4-axis swiveling head Preparation for 5-axis machining with CNC rotary table Spindle speed: 20–9,000 rpm Tool holder: SK40 Tool magazine with 36 positions Spindle power: 30 kW Internal coolant supply at 20 bar Coolant tank with 450 liters and paper band filter Portable electronic handwheel Ethernet interface Chip conveyor Central lubrication Full enclosure with roof Preparation for wireless Renishaw 3D probe Partition for dual-station system Condition Tool changer completely overhauled Machine in good, well-maintained condition Ready for demonstration under power and immediately operational

Condition: good (used), Year of construction: 1999, x-travel 2400 mm y-travel 2850 mm z-travel 1000 mm Control FIDIA C20 table dimension - longitudinal 2200 mm Fedpfjvwgphsx Akvjgf table dimension - cross 1800 mm table load 12 t workpiece tool changer 30-fach tool taper ISI SK-50 spindle turning speed range 5000 U/min power capacity - milling spindle 30 kW

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° Fgodpsy Ez Elofx Akvsf - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 11460000643, functionality: fully functional, operating hours: 35,319 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 10,000 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 10 rpm, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 125 P duoBLOCK, year of manufacture: 2006, operating hours (h): 35,319, serial no.: 11460000643, travels (X/Y/Z): 1,250/1,000/1,000 mm, spindle speed max. 10,000 rpm, 60-fold tool changer, B-axis, 190° swivel, HEIDENHAIN Mill Plus control, internal coolant supply, tool measuring system, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Fodpfjrkz Tfex Akvsgf

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, Fedszm Ticepfx Akvsgf A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, swarf conveyor, through spindle coolant,

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, feed length X-axis: 2,040 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 760 mm, total height: 3,500 mm, total length: 7,200 mm, total width: 4,000 mm, TYC FVP 2011 CNC Gantry Machining Center with Horizontal Head Main description PEGAS-GONDA s.r.o., a manufacturer of band saws, offers for sale a TYC FVP 2011 CNC gantry machining center with an interchangeable horizontal milling head. The machine was commissioned in 2007 and has been used exclusively in our production facility in a single-shift operation. It is fully operational, connected to power, and available for inspection under working conditions. Upon prior agreement, a test machining operation and a verification of the machine’s geometric accuracy can be arranged. Fgodpfx Ajzp Iqaekvsf The machine is being sold due to the modernization of our production technology. Technical specifications Manufacturer: TYC Model: FVP 2011 Machine type: CNC gantry machining center Year commissioned: 2007 Control system: Heidenhain Travel: X-axis: 2,040 mm Y-axis: 1,100 mm Z-axis: 760 mm Working table: Table dimensions: 2,000 × 1,000 mm Maximum table load: 3,500 kg Spindle and heads: Spindle taper: ISO 50 Vertical head speed: 6,000 rpm Horizontal head speed: 3,000 rpm Horizontal head indexing: 5° Tool magazine: Automatic tool changer Capacity: 40 tools Cooling: External coolant supply Internal coolant supply Machine condition Fully operational Connected and ready for demonstration Used in single-shift operation Test machining possible by prior arrangement Geometric accuracy inspection possible Technical documentation available Optional pallet clamping system A pallet clamping system with two pallets can also be supplied. One pallet is located inside the machine, while the second pallet can be used for workpiece preparation outside the machining area. This significantly reduces setup and preparation times. Price Machine price: EUR 82,000 net, plus VAT Optional two-pallet clamping system: EUR 4,167 net, plus VAT Inspection and further information The machine can be inspected and demonstrated under power at our production facility in the Czech Republic. Additional photographs and technical documentation are available upon request. A personal inspection, test machining, and geometric accuracy verification can be arranged for serious prospective buyers. Location: Slavkov u Brna, Czech Republic Seller: PEGAS-GONDA s.r.o.

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column Fjdpfx Akezmp E Hevjgf - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column Fedpfx Ajzmp Eyokvegf • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 Fsdszmp Emspfx Akvogf SPECIAL PRICE!

Condition: excellent (used), Year of construction: 2007, operating hours: 13,500 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, overall weight: 15,800 kg, operating hours of spindle: 13,500 h, coolant supply: 40 bar, We offer in good condition Deckel Maho DMU100P Duoblock from 2007 with only 13.500 spindle hours. Heidenhain iTNC530 control X-Axis travel: 1000 mm Y-Axis travel: 1000 mm Z-Axis travel: 1000 mm Internal coolant 40 bar SK40 12.000 RPM Spindle Table Ø1100 x 900 Fgedpfx Akszlyd Dsvjf Machine will be in stock in the next 2 weeks.

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm size of pallet 1.000 x 1.250 mm control SIN840D power capacity at 40 % load 38,00 KW spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min Fsdpfezpbfdjx Akvogf rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3.600 ° / min C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. table load 3.000 Kg tool magacine with 240 tool diameter 110 mm wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with control SIEMENS Sinumerik 840D incl. ShopMill electronical handwheel operating mode 4 240-position tool magazine 4-position pallet storage system TS641 measuring probe BLUM laser coolant system coolant through the spindle chip conveyor coolant cooling Machine can be inspected under power

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling Fedpfx Akjzlurijvegf • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole drilling • Fully enclosed machine • Large interference circle 2800 mm • Includes washing gun • Short delivery time, subject to prior sale

Condition: good (used), Year of construction: 2004, operating hours: 31,189 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 426/430PB, rotary table diameter: 800 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 36, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Matec matec-30 HV universal machining center, manufactured in 2004. Manufacturer: Matec Model: matec-30 HV Year of manufacture: 2004 Condition: good Category ID: 1463 Type ID: 4166 Fgjdozndurjpfx Akvsf Machine type: Universal machining center 2000 x 800 x 800 mm (x y z) Installed rotary table D800mm Swiveling head, incremental indexing of +-110° 15,000 RPM, SK40, internal coolant 40 bar / compressed air through the spindle, tool magazine with 36 positions Heidenhain TNC 426/430PB The machine is being sold because we need space, and it is coming directly from our production. The location is 85625 Baiern. The machine is still in production and can be inspected while powered on. If you have any questions or need more information, please send us a message or call us.