Used Matec for sale (33)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,577 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Matec HV 30 was manufactured in 2007, featuring a Heidenhain iTNC 530 control, a new spindle installed in August 2021 with 5,577 hours, and a spindle speed of 12,000 rpm SK40. It offers X-axis travel of 3000 mm, Y-axis travel of 1000 mm, and Z-axis travel of 1100 mm. Consider the opportunity to buy this Matec HV 30 vertical machining centre. Contact us for more information about this machine. Pedpfsyfunrox Ah Hepl • Operating hours: 83,000 h • Total spindle hours: 32,800 h • New spindle installed: Aug 2021 → current spindle hours: 5,577 h • Material history: ~95% aluminum machining • B-axis: ±105° • C-axis: 360° • Handwheel • Tool magazine: 60 positions, SK40 • Internal coolant supply Additional equipment • Oil mist extraction • Renishaw probe Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Ppsdpfx Ahox Tg Stj Hsl Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: ready for operation (used), Year of construction: 2009, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, This 5-axis Matec 30-HV was manufactured in 2009, featuring a versatile universal machining center with a large X-axis travel of 3000 mm and a Y-axis of 600 mm. It includes a high-speed range up to 12,000 rpm, a tool magazine for 36 tools, and a high-pressure cooling system (70 bar). Ideal for complex 3D machining with its powered CNC rotary table and Heidenhain iTNC 530 control. Contact us for more information about this machine. Additional information Podpfxox D Rggs Ah Hopl • Dimensions of Machine (LxWxH): X = 3000 mm (table 3500 mm), Y = 600 mm, Z = 800 mm Horizontal • Rapid traverse: 48 m/min in the X, Y, and Z axes • Powered CNC rotary table for 3D machining • Tool magazine for 36 tools • Tool length max: 380 mm • 3D measuring probe with radio control and radio signal transmission • High-pressure cooling along and through the spindle (70 bar) • Coolant tank: 900 l • Automatic doors

Condition: excellent (used), Year of construction: 2013, 5-axis machining center (BAZ) Control: Heidenhain Travel paths: X 2000 mm, Y 600 mm, Z = H 800 mm, V 700 mm. Max. clamping weight (rotary table): 1200 kg Max. spindle speed: 18,000 rpm Pedpfx Ajyaba Dsh Hepl

Condition: good (used), Year of construction: 2021, Matec HV 700, Year of manufacture: 2021, Heidenhain TNC 640 control system, Psdpfx Ajyctf Doh Hopl X/Y/Z travel 2600/700/950 mm horizontal, X/Y/Z travel 2600/700/950 mm vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, ICS 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electronic handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition wall, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours,

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 15,000 rpm, Matec 5000 Travel: 5000x800x800 mm Table size: 5000x850 mm Kessler spindle, 15,000 rpm Tool holder: SK40 Pedpfxoych R Is Ah Hepl Tool magazine: 45 tools

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand BOSCH Model OSA3 Main Drive Number of axis 4 Movement X-Axis Movement 2000 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Tools Number of index 48 Type of tool holder HSK63 Media Chip conveyor Yes Ppjdpfx Ahjx Tkabe Hjl This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2004, Ref. -No.: 10387 Manufacturer: MATEC Type: 30 L / 6000 Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN iTNC 530 Podpfxex Sw Ebj Ah Hspl Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 800 mm Z-Travel: 600 mm Spindle Taper: SK 50 Table Load: 3000 kg Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 9000 RPM Max. Torque: 165 Nm Main Drive: 60 kW Weight Of The Machine Ca.: 24 t

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm NC swing head +/- 105° swiveling Heidenhain TNC640 Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Prepared for additional NC axis 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min Ppodpfx Ahsyaa Sfe Hel 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Tools and vices can be taken over if required.

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, table width: 1,200 mm, table length: 4,500 mm, rotary table diameter: 1,250 mm, NC Rotary table 1250 mm with 50 Rpm Full C-Axis  360.000 with HIGH TORQ Drive Pjdpfx Ahsx Sqf Is Hspl HSK-100 with 90 kW and 15.000 Rpm 5 Axis simulteneous package Last service in 2023  X - Travel: 4000mm Y - Travel: 1200mm Z - Travel: 1300mm A - Axis: 105° B - Axis: 360000° Table Length: 4500mm Table Width: 1200mm Table Ø: 1250mm Spindle Taper: 100ISO/Bt/Mk Power on spindle: 90kW Speeds / ranges: 15000Rpm ATC / revolver: 60 Coolant through spindle / Bar:70 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 10500mm Width: 4500mm Height: 4100mm Weight: 34000kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: VDI 40, number of slots in tool magazine: 36, Additional equipment: 4th axis IKZ (internal coolant supply) with 40 bar Swivel head with 1° increment Ppodpsx Sv A Sofx Ah Hel 3D wireless probe

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 15000 Spindle motor power 16 kW Tool taper HSK 63 Number of axis 4 Movement X-Axis Movement 1300 mm Y-Axis Movement 600 mm Z-Axis Movement 800 mm Table Table load 400 kg Tools Number of index 36 Type of tool holder SK40/DIN 69871 or HSK 63-A Media Chip conveyor Yes Pedpfxex D Ix To Ah Hepl This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, General Data Ppsdpfxox D D D Ee Ah Hol Machine weight 19000 kg Movement X-Axis Movement 4000 mm Y-Axis Movement 825 mm Z-Axis Movement 1100 mm Table Table load 4000 kg Turret Number of tool slots 48 Media Internal cooling Yes Additional Equipment Pneumatically opening doors Partition wall for two-field machining Ventilated measuring systems Optional: High-pressure pump (40 bar) and NC rotary table This 5-axis Matec 30 HV CNC vertical machining center was manufactured in 2000. It features a milling spindle with a speed range of 20-9,000 rpm and a drilling capacity in St 60 of 60mm. The machine boasts large travel distances with X-axis at 4000 mm, Y-axis at 825 mm, and Z-axis at 1100 mm. It supports a maximum table load of 4000 kg. If you are looking to get high-quality milling capabilities consider the Matec 30 HV machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2010, Movement X-Axis Movement 3000 mm Y-Axis Movement 600 mm Z-Axis Movement 800 mm B-Axis Movement ±105° C-Axis Movement 360° Additional Equipment Turning Package: Enables high-precision turning operations in combination with standard milling, facilitating turning and milling in a single setup. This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us. Ppodpfxex D Dy Hs Ah Hsl Application Types Milling

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0897, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 21,600 W, Matec 30 HV/S CNC Machining Center (2006) Heidenhain CNC Controller, Samsys+ Multi-3000 Barstock Loader Coolant Reclaim System, and Chip AugerMatec 30 HV/S CNC Machining Center Heidenhain Control 5-axis Spindle speed up to 18,000 RPM, spindle motor power 29 HP (21.6 kW) Ppedpjx Ap Hvefx Ah Hol tool capacity 24 tools, travel 30 x 20 x 20 inches (762 x 508 x 508 mm) includes SamSYS feeder Under maintenance parts missing Sublocation - Building 6

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 1000 mm surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° NC swivel head +/-90 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ppjdpsxx A Ncjfx Ah Hol Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2004, Travel X/Y/Z: 3000mm/800mm/800mm, speed: 9000rpm, tool positions: 48, rapid traverse: 30m/min, table dimensions X/Y: 3500mm/900mm, weight: approx. 12000kg. Documentation available. An on-site inspection is possible. Pjdpfoxwcucsx Ah Hjpl

Condition: good (used), Year of construction: 2010, Matec 30 L, year of manufacture 2010, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-position tool magazine, full enclosure of work area, direct measuring systems, chip conveyor, bellows with steel lamellae, 3D measuring probe, laser measuring device. Ppjdpfx Ahsxu U Upo Hsl

Condition: good (used), Year of construction: 2012, Matec 30 L, Podpfx Ahsw Uf Izs Hjpl Year of manufacture 2012, Heidenhain iTNC 530 control, X/Y/Z travel 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63-A spindle mount, Electric handwheel, 20 bar internal coolant supply, Paper belt filter, 80-way water coolant supply, Fully enclosed work area, Direct measuring systems, Chip conveyor, Bellows with steel blades, 3D measuring probe, Laser measuring device

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Bosch Rexroth, controller model: IndraMotion 10, rotary table diameter: 800 mm, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, short taper mount: 63 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis gantry-type machining center with 3,000 mm travel on the X-axis, 600 mm on the Y-axis, and 800 mm on the Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°. Turning package: Enables high-precision turning operations in combination with standard milling and facilitates both turning and milling in a single setup. Rotary table speed: 500 rpm. Pedpfx Ahoxn Ikdj Hepl Rota S Plus 800 chuck by Schunk. The operating hours counter is defective.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, Ppsdpfx Ahexg D Ate Hsl without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring Ppsdpexg Dhcsfx Ah Hjl - Automatic safety doors

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0728, X = 5,000 mm Y = 1,025 mm Z = 1,100 mm / Horizontal Z = 1,000 mm / Vertical - Continuously adjustable NC swivel head, +/- 105 degrees, as a CNC axis for horizontal and vertical machining, indexing accuracy +/- 5 seconds - Heidenhain iTNC530 controller, hard disk with approx. 21 gigabytes of free space - HSK100 motor spindle, speed range 20-8,000 rpm, drive power 44 kW, torque 350 Nm - NC rotary table SKH 4/630 Horizontal faceplate Faceplate diameter: 630 mm Standard height: 300 mm Indexing accuracy: +/- 12" Max. load: 900 kg Max. tangential torque at 63 bar: 2400 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis - NC rotary table SKH-NC 9/1450 Horizontal faceplate Faceplate diameter: 1450 mm Indexing accuracy: +/- 12" Without direct measuring system Ppjdpfx Ahsxgnfxs Hsl Max. load: 5,000 kg Max. tangential torque with clamping: 16,000 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis Special enclosure for rotary table diameter 1450 mm included Swing circle diameter: 1500 mm No turning operation possible! - 60 tool stations - Fully enclosed working area with roof - Bellows with steel lamellae - Direct measuring system for NC rotary table, indexing accuracy +/- 5 degrees - Direct linear measuring system for X, Y, Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Working area lighting, 6-fold - Mounting elements - 3D wireless measuring probe - Tool probing system for measuring and checking cutting tools in the machine, TT140 - Unilok ESM 130 zero-point clamping system 36 units integrated in the machine table 16 units embedded in the rotary table faceplate (diameter 1450 mm) 4 units embedded in the rotary table faceplate (diameter 630 mm)

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 0112, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 9,000 rpm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! Podpfx Ahsw Hrh He Hepl TECHNICAL DETAILS Travel distances Travel X: 1,500 mm Travel Y: 3,500 mm Travel Z: 1,000 mm Worktable dimensions: 4,500 x 1,600 mm Spindle and Tooling Max. spindle speed: 9,000 rpm Swivel range of angular head (B-axis): ±90° Tool holder: SK 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 5,000 x 3,700 mm Weight: 32,000 kg EQUIPMENT 2 ALMATIC machine vices Various clamping devices for the machine Technical documentation

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, machine/vehicle number: 1159, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,700 mm, number of slots in tool magazine: 40, swivel angle A-axis (min.): -105 °, swivel angle A-axis (max.): 105 °, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Placing a bid is binding and obligates the buyer to collect the machine within the specified period: July 28, 2025, to July 31, 2025. Machine includes approx. 90 tool holders TECHNICAL DETAILS Travel Range X-axis: 4,000 mm Travel Range Y-axis: 1,200 mm Z-axis Travel (horizontal): 1,700 mm Pjdpfx Aewu E Ezoh Hspl Z-axis Travel (vertical): 1,690 mm Rapid traverse: 30 m/min Swivel Head and Axis System Swivel Head: Two-axis universal swivel head, continuously adjustable in both axes simultaneously Clamping: Axes can be hydraulically clamped via M-function A-Axis Working Range: ±180° Torque without clamping: max. 1,750 Nm Torque with clamping: max. 2,500 Nm Direct measuring system: ±3″ B-Axis Working Range: ±180° Torque without clamping: max. 4,200 Nm Torque with clamping: max. 12,000 Nm Direct measuring system: ±5″ Spindle Speed range: 20 – 8,000 rpm Power at 40/100% duty cycle: 33/24 kW Torque at 40/100% duty cycle: 382/278 Nm Tool Magazine Number of tool stations: 40 Tool holders included: approx. 50 HSK 100 + 40 HSK 100 in magazine Max. tool weight: 20 kg Tool length: 460 mm Max. tool diameter with adjacent positions occupied: 125 mm Max. tool diameter without adjacent positions: 200 mm Tool change time: approx. 8.5 s Chip-to-chip time: approx. 9.5 s CNC Control Control: Siemens SINUMERIK 840 D-POWERLINE Rotary Table Type: NC rotary table with direct drive Faceplate diameter: 1,900 mm Max. load capacity horizontal (turning/milling): 5,000 kg Circular run-out accuracy: 0.02 mm Flatness accuracy: 0.015 mm over 1,000 mm Rated speed: 180 rpm at 100% duty cycle Total clamping surface: approx. 4,300 × 1,200 mm (excluding full diameter of NC rotary table) T-slots: 11 × 18H7 MACHINE DETAILS Installation dimensions: 8000 x 6000 x 5000 mm Weight: 45 t Transport width: approx. 3,450 mm Transport length: approx. 6,900 mm Loading height: approx. 4,015 mm EQUIPMENT - Two-axis universal swivel head with stepless adjustment - Direct measuring systems in A/B-axis - NC rotary table with direct drive - Siemens SINUMERIK 840 D-POWERLINE CNC control - 40-station tool magazine - Approx. 90 HSK 100 tool holders - Complete documentation The machine can be transported on trucks up to 3,000 mm wide.