Used Universal Machine for sale (64,601)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 172822005, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Swivel axis A: ±120° Rotary axis C: 360° Rotary table diameter: 500 mm Spindle speed (max.): 18,000 rpm Rapid traverse rate, X-axis: 36 m/min Rapid traverse rate, Y-axis: 36 m/min Rapid traverse rate, Z-axis: 36 m/min Number of tool slots in the tool magazine: 24 Positioning accuracy: 0.01 / 300 mm Repeatability: ±0.01 mm Pgsdpjy S Ua Nofx Amkol MACHINE DETAILS Control system: Heidenhain TNC530i Coolant supply: 20 bar Dimensions & Weight Dimensions (L x W x H): 3,015 x 5,050 x 3,000 mm Total weight: 9,000 kg Type of input current: Three-phase Power: 60 kVA Frequency: 50 Hz Rated voltage: 400 V Number of phases: 3 + PE Rated current at full load: 100 A Short-circuit strength: 25 kA Maximum load current: 200 A Fuse protection / rated current: 80 A Operating hours Spindle hours: 6,940 h Program runtime: 7,686 h Machine operating hours: 17,193 h Control system operating hours: 19,880 h EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Number of tool changer positions: 60 Maximum workpiece weight: 800 kg MACHINE DETAILS Control model: Heidenhain 430 EQUIPMENT Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Heidenhain TS 642 probe Pgedpfx Asy Szq Uomkol

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning Pgedpfx Amozagr Sskol working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length Pedjzagr Eepfx Amkjgl • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: used, Number of boring spindles 1 St. Motor output 1,1 kW Workpiece thickness ca. 100 mm Working width 650 mm Pgodpfslfcnwex Amksl Foot-operated drill machine Scheer type BM340

Condition: good (used), Year of construction: 2004, operating hours: 6,293 h, functionality: fully functional, For sale is a machining centre from the manufacturer Deckel Maho, model DMU 50. The machine is in good condition and can be inspected on site. Psdpoyghqvefx Amkogl

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details Psdpfx Aszaan Tjmkjgl x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment Pjdpszaakbofx Amksgl * Machine lamp

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication Pgjdpfey U U Nisx Amkjl * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2015, Internal item number: 26008 Universal Milling Machine Wagner FTA 400 Year of manufacture: 2015 Travel paths: X 400 / Y 200 / Z 380 mm Spindle mounting: SK40 Speed range: 50 - 2000 rpm Table size: 750 x 320 mm Workpiece weight: max. 285 kg Main drive: 2.2 / 3.0 kW Feed: 50 - 450 rpm (stepless) Quill diameter: 90 mm + Hydraulic machine vice + Safety enclosure (UVV-compliant) + Coolant pump + Operating manual Dimensions (LxWxH): 170 x 170 x 190 cm Weight: 1300 kg The machine comes from an educational institution and is in well-maintained condition. Pgsdpfxoymwpbj Amkol You are welcome to inspect the machine under power in over 500 m² of heated storage space.

Condition: used, Internal item no.: 26004 Universal Milling Machine Hermle UWF 800 Pgsdpfxsy Hitts Amkjl + 3-axis digital readout + Hydraulic machine vice Röhm + Rotary, swivel, tilting table + Steady rest + Machine documentation + Machine feet Travel paths: X 500 / Y 300 / Z 400mm Table: 600 x 320mm Spindle mount: SK40 Power: 3 kW Dimensions (LxWxH): 140 x 190 x 170cm Weight approx. 1,000 kg The machine comes from a training facility and is in well-maintained condition. You are welcome to inspect the machine under power on more than 500m² of heated storage area.

Condition: good (used), Year of construction: 2007, Internal item no.: 26009 You are welcome to inspect the machine under power on over 500 m² of heated storage area. Universal Milling Machine Intos FN20 Year: 2007 + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Travel: X 300 / Y 200 / Z 350 mm Pgodpfxsyg Dk So Amkjl Spindle taper: SK40 Speed range: 50 - 2500 rpm Clamping area of milling table: 240 x 600 mm Feed rate: 8 - 400 mm/min Rapid traverse: 1340 mm/min Dimensions (LxWxH) approx.: 130 x 150 x 190 cm Weight: approx. 1000 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Stimin FUS-22-2M Year of manufacture: 2000 Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Table size: 670 x 320 mm Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg Pjdpfx Amjygv Shskjgl The machine comes from a training facility and is in well-maintained condition.

Condition: good (used), Year of construction: 2005, Internal article no.: 24012 Universal milling machine Macmon M100 NC YEAR OF MANUFACTURE: 2005 Control: Heidenhain TNC124 + coolant pump + machine vice Travel: X 310 / Y 170 / Z 330mm Speed: 40-2000 rpm Mounting: SK40 LxWxH: 1200 x 1600 x 1850mm Pgjdpfx Ajrywa Rsmksl Weight: approx. 1000Kg

Condition: good (used), Internal article no.: 26031 Universal milling machine Deckel FP1 Infinitely variable feed + Various SK40 tool holders + Collet set (S20x2) + Hydraulic machine vice Röhm 110 The servomotor has been overhauled! Travel: X300 / Y160 / Z340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Pedpfx Amoyqx S Esksgl Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min The machine is fully functional and can be inspected under power, by appointment, in a heated storage area of over 500 m².

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Internal item no.: 26006 You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Pgodpeygv Upsfx Amksl Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Travel distances: X300 / Y160 / Z340 mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 The machine comes from an educational institution and is in well-maintained condition.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Pgjdjvvi I Ropfx Amkol

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 Pgodpfx Ameyzt Dlsksl number of tool places 30+190 Pos. A-axis ° C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 800 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2011, operating hours: 5,680 h, functionality: fully functional, Control system: WINMAX V08 Table dimensions: 1220 x 610 mm / D600 mm Table load capacity: 1000 kg X-axis travel: 1060 mm Y-axis travel: 610 mm Z-axis travel: 610 mm C-axis: 0 - 360 degrees A-axis: +/-92 degrees Spindle speed: 12000 rpm Pjdpfx Asy Ux Tfjmksgl Spindle taper: SK40 Drive power: 11/18 kW Weight: 7500 kg Dimensions (LxWxH): 3200 x 2450 x 2650 mm Accessories / Features - NC rotary table - Swivel spindle - CTS 20 bar (Coolant Thru Spindle) - Chip conveyor - Coolant system - RENISHAW zero-point measuring system with touch probe - Machine feet - Manuals The machine is in very good technical condition. Immediately available.

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale! Pgedpfxjy Umhds Amkel

Condition: used, x-travel 1000 mm y-travel 330 mm z-travel 500 mm table-size 1300 x 280 mm turning speed range 30- 1500 U/min Pgodpfxey Ul U Ns Amkel power requirement 2,5 kW tool adaptor ISO 40 | feed speeds 13- 620 mm/min | weight 2,1 t range L-W-H 2,0 x 1,5 x 1,9 m Universal tool room machine with digital scale - turn- and swiveling v- head . h- spindle - automatic feed - hand wheels - coolant system - machine light

Condition: ready for operation (used), Year of construction: 2001, operating hours: 44,134 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: HEIDENHAIN TNC426/430, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,150 mm Travel range, Y-axis: 710 mm Travel range, Z-axis: 710 mm Spindle speed, max.: 12,000 rpm Pgodpfxoy Uk Hws Amksl Table dimensions: 1,500 x 800 mm Table load capacity: 1,100 kg C-axis: 0 - 360° Tool interface: SK40 Number of tool magazine positions: 32 MACHINE DETAILS Operating hours: 44,143 h Control system: HEIDENHAIN TNC426/430 Total connected load: 62 kVA Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,800 x 3,000 mm Machine weight: 9,700 kg EQUIPMENT Coolant system NC rotary table mounted on the machine table Chip conveyor Electric handwheel Manuals / Documentation

Condition: used, Technical details: grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm Pgedpfxow Rktbo Amkjl workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad Pedpfxsu Ndf Ij Amkogl feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: used, Year of construction: 1982, Technical details: Pedow Rktzjpfx Amksgl grinding diameter: 350 mm grinding length: 1000 mm centre height: 225 mm grinding length: max. 1600 mm centre distance: 1540 mm spindle bore: 38 mm max. swivability: 90 ° weight of the machine ca.: 6,0 t dimension machine xH: 4,4 x 2,45 x 2,3 mm Machine with CNC package and DFU connection Multi-range measuring head for interrupted surface Tailstock with cylinder error correction Final balance balancing device *