Used machining centers (universal) over 1000mm X-axis travel for sale (152)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 21,967 h, functionality: fully functional, machine/vehicle number: 84.34, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,000 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (longitudinal): 1,000 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Control: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and travel speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Ibedpfx Adovxr Ilersf Program run: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table

Condition: good (used), Year of construction: 2003, functionality: fully functional, Controller HEIDENHAIN TNC426/430 Table size 3500 x 650 mm Table load 1362 kgs Travel X=3000 mm Travel Y=800 mm Ibjdpfx Ajwtgbbodref Travel Z=1100 mm Spindle swieveling +/-90 degree Spindle speed 15.000 rpm ATC 48-fold Weight ca 11000 kgs Dimensions LxWxH = 5900 x 4600 x 4500 mm Accessories, features - coolant through spindle 40bar/60l/min (it is recommended for gun drilling too !!!). - swieveling main headstock - additional table - coolant unit - tooling, tool cabinet and accessories shown on pictures.

Condition: new, Year of construction: 2023, functionality: fully functional, 5-axis travelling column machining centre - SAMAG SFZ3500- Ibodpfsttv Haox Adrjf with swivel head and internal rotary table (Ø:1000mm, interference Ø:1300mm) X:3500mm Y:1000mm Z:1000mm Spindle: SK50 max. 12,000rpm 54kW Tool changer: 60 Control: Heidenhain TNC7 Coolant system with paper belt filter Internal coolant supply: 40bar (max. 80bar) Internal air supply through the spindle 3D touch probes Collision monitoring (DCM) Kinematics Opt The machine is available at short notice and can be inspected and tested at the factory.

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm Iedpfjvxwuwex Adrjbf workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power

Condition: ready for operation (used), Year of construction: 2002, operating hours: 51,071 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS Travel X / Y / Z: 1,250 / 880 / 800 mm Control: Heidenhain Speed: 10,000 rpm B-axis: automatic Number of places in the tool changer: 120  Tool holder: SK-50  Number of pallets: 4 pieces Pallet dimensions: 1,000 x 800 mm MACHINE DETAILS Switch-on time: 51,072 h Spindle hours: 16,261 h Transport dimensions of machine: 5.5 x 3.0 x 3.1 m; 14.3 t EQUIPMENT - electronic handwheel - MillPlus 3D path control - blowing air spindle center - measuring probe: TS 641 - flushing gun - documentation - chip conveyor (hinge belt) - coolant system - preparation for oil mist extraction Iodpfx Asvtptuodrobf

Condition: used, Year of construction: 1996, x-travel 1500 mm y-travel 650 mm z-travel 650 mm size of pallet 1740 x 650 mm spindle taper SK 50 spindle turning speed range 25 - 6000 U/min feeds longditudinal/cross/vertical max. 8 mm/min rapid traverse longitudinal and cross 26 m/min rapid traverse vertical 20 m/min spindle throat 665 mm distance spindle nose and table 200 / 850 mm drilling in full material 50 mmø threading M 45 Ibedpfxjtqqtks Adref ATC 60 Pos tool diameter 125 mm wotkpiece diameter with 2 vacant positions 260 mm workpiece length 400 mm weight of tools max. 20 kg spindle drive 18,5 kW max. torque on the spindle max. 758 Nm Accessories: chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 7,470 mm, travel distance Y-axis: 590 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 15, Equipment: chip conveyor, documentation/manual, No minimum price – guaranteed sale to the highest bidder! Original price was approx. 200,000 EUR TECHNICAL DETAILS Travel path X-axis: 7,470 mm Travel path Y-axis: 590 mm Travel path Z-axis: 400 mm C-axis: 360° A-axis: available Number of axes: 5 Software: ITALCAM 3D Electrospindle power: 12 kW (0/24,000 rpm) Maximum torque: 9.5 Nm at 12,000 rpm Spindle speed: 24,000 rpm Spindle nose: HSK 63 F Number of spindles: 1 Number of slots in the tool magazine: 15 Spindle cooling: liquid Work area: 2 Machinable sides: 5 Standard clamping devices: 12, independently positionable Tool magazine: 15-position tool holder mounted on the slide Clamping force: 130 kg per clamping device Lubrication nozzles: 1 at the electrospindle Tank capacity: 2.2 liters Slide lubrication: automatic MACHINE DETAILS Dimensions (L x W x H): 9,800 x 3,100 x 3,000 mm Transport dimensions (L x W x H): 9,500 x 2,150 x 2,500 mm Weight: 3,500 kg Rated power: 18 kW Current consumption: 32 A Voltage: 400 V three-phase with transformer Frequency: 50/60 Hz Air pressure: 7 bar Accuracy: 0.1 mm Operating temperature: 10 to 35 °C Air humidity: 75 % Standard colors: RAL 7015 Chip conveyor system: chip conveyor belt Ibodjwqfi Eopfx Adref Machine safety: safety light barrier on three sides of the machine Operating interface: 17-inch LCD monitor EQUIPMENT - Documentation/manual - Infinitely variable speed setting - Chip conveyor - USB port on the control panel

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 11920000463, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, table width: 1,000 mm, table length: 8,000 mm, spindle motor power: 35,000 W, spindle nose: HSK-63, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, ACCESSORIES Chip conveyor Oil mist collector 60 positions in tool changer 980 liter high pressure coolant through the spindle system with paper band filter Isdpor Npvlefx Adrobf Infrared measuring sensor Tool measurement with BLUM Laser 3D Quick Set preparation Cooling unit Air blast through the spindle

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1110 000026 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS Working surface: 1,000 x 800 mm System: DMG Heidenhain Mill Plus Rotating table (4th axis): available X-travel: 1,250 mm Y-travel: 880 mm Z-travel: 800 mm Spindle Spindle mount: SK50 Max. spindle speed: 8,000 rpm Spindle motor power: 28 kW Pallet changer Number of pallets: 2 pieces Pallet size: 1,000 x 800 mm Tool magazine Ibedpjvwb Huofx Adrof Number of tools: 120 pieces

Condition: used, Year of construction: 2008, travel -x axis 10.000 mm travel -y axis 1.000 mm travel -z axis 500 mm control SIN840D Profile Length 7.200 mm profile width 300 mm height of profile 300 mm workpiece sizes max. 8.000 x 1.000 x 300 U/min spindle turning speed - stepless 1 - 24.000 U/min power capacity 15,00 kW tool taper HSK-A50 Feed X / Y- axis 1 - 60.000 mm / min. Feed z- axis 1 - 20.000 mm / min. B - axis +/- 180 ° C-axis 360 ° tool magazin: 24 tool length - max. 240 mm tool diameter 95 mm Ibedpfov T Nn Sex Adref wotkpiece diameter with 2 vacant positions 200 mm saw blade diameter max. 350 mm working area 7.200 x 300 mm total power requirement 30,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 13,00 x 5,50 x H3,80 m 5-axis high-speed machining center with SIEMENS SINUMERIK840D control, RECKERTH high-frequency spindle, 8 carrier units, each with a pneumatically operated clamping device, arranged in the Y-direction and adjustable in the X-direction via one positioning axis each, BLUM tool measurement. Machine can be inspected under power.

Condition: good (used), Year of construction: 2006, operating hours: 51,929 h, functionality: fully functional, machine/vehicle number: 86684, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller model: Siemens 840d + Shopmill, total height: 3,210 mm, total length: 10,000 mm, total width: 4,500 mm, rotational speed (max.): 8,000 rpm, Equipment: chip conveyor, documentation/manual, with cross slide, SK 50, machine has a swivel head, plus Rotary table d= 800mm, traveling column and headstock made of high-quality machine casting, direct measuring systems in the basic axes X/Y/Z, power: 75 KWA, control voltage: 24 V, frequency: 50 Hz, back-up fuse: 16 A maximum, circuit diagram:86684, including: Rotary table, adaptive, diameter 800 mm, coolant pump: with 4 x Grundfos motors, and 1 x Walther Flender motor, extraction unit: type: ESB 300/38.1 with 37 kW, serial number: 6861-001 and Flender motor, cooling system from Rittal, tool magazine with 78 places Dismantling by the buyer, on-site support for loading, inspection recommended. Isdpfx Ajw A Hntedrobf

Condition: used, Year of construction: 2006, CNC Heidenhain TNC530 Ijdswutxijpfx Adrjbf X/Y/Z 1,500/800/1,000 mm Swivel axis 0-180° A-axis C-axis B-axis Max. workpiece weight 1,500 kg Machine weight 18,000 kg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,530 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 54, TECHNICAL DETAILS Control: Sinumerik One - Spios 24 touch Travel X: 1,530 mm Travel Y: 530 mm Travel Z: 465 mm Spindle and Tool System Number of tools: 54 Milling spindle: High-precision milling spindle, in-line spindle with direct drive, no belt Spindle speed: max. 12,000 rpm Spindle power: 15.2 kW Spindle torque: max. 97 Nm Tool holder: SK40 DIN 69871 Tool changer type: Double gripper Spindle pressure: 22 bar Table System Rotary-tilt table: 2 axes, D = 650 mm Table design: Precision design “T” Fixed table: left in the working area Hydraulic brake: on B and C axes Rotary feed: dual, at the center of the C axis Table load: 500 kg B axis: -5° / 110° Isdpfx Adowu Ebisrobf Direct measurement system: on B and C axes Direct measurement systems: on X, Y, and Z axes Control Control type: Siemens SINUMERIK ONE Language selection: CNC dialog German, English as second language Touch panel: SPIOS Touch V2 Operation: Multi-Control-Wheel, multifunctional hand-held control unit Software: Machining software: ONE-Dyn. Operate 3A-Fr Programming function: ShopMill step programming Axis machining: 4-axis with rotary axis 3D function: 3D simulation of the finished part Residual material detection: included DXF reader: single license Machining tracking: recording of machining process Kinematic measurement: Cycle 996 Memory upgrade: 2 GB additional user memory Probing functions: for integrating measuring probes MACHINE DETAILS Cooling and Pressure Universal chip conveyor: with coolant tank High-pressure tank: 22 bar Spindle preparation: for high pressure Blow air: additional blow air at the spindle head Spindle probe preparation: available Robot Integration Robot door: available Interface: UNIROB universal robot interface Electrics Operating voltage: 3×400 V ±10 % Mains frequency: 50 Hz (±2%) Mains system: TN system (5-wire system) Standards: Technical design according to CE EQUIPMENT - Chip conveyor - Blow air at the spindle head - Robot door right - UNIROB universal robot interface - BLUM spindle probe

Condition: good (used), Year of construction: 2022, Universal Machining Center Machine type: DMG DMF 360 / 11 Control: Heidenhain TNC 640 Celos Year of manufacture: 2022 TECHNICAL DATA: Travel: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm B-axis C-axis Number of controlled axes: 5 Dynamics package for DMF 360 linear (Y1100) Rapid traverse (X/Y/Z): 80 / 60 / 60 m/min Spindle speed range: 20 - 10,000 rpm Drive power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK 50 Tool changer Tool stations: 120 Ibedpfx Aowtdgnsdrof NC rotary table Table size: 4,200 x 1,100 mm Max. table load: 1,200 kg Equipment features: Internal coolant supply (IKZ): 40 bar Coolant tank: 980 l Chip conveyor Chip flushing gun Oil mist extraction Air through spindle center Touch probe: Heidenhain TS 460 Prepared for 3D quickSet Automatic doors Electronic handwheel

Condition: good (used), Year of construction: 2008, Universal machining center: Moving column Machine type: AXA VHC 2 - 1760 XTS Control: Siemens 840 D ShopMill Year of construction: 2008 TECHNICAL DATA: Travels: X-axis: 1,760 (2 x 630) mm Y-axis: 600 mm Z-axis: 800 horizontal or 770 vertical mm A-axis B-axis: +/- 100°, hydraulically clamped, infinitely variable interpolation Ibodev Nhwdepfx Adref Rapid traverse: (X/Y/Z): 40 / 40 / 30 m/min. Number of controlled axes: 5 Speed range: 30 - 6,000 1/min. Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool changer Tool positions: 36 NC rotary table: AXA RTA 4L-520 Faceplate: Ø 520, for vertical & horizontal setup mm Tailstock: manual, center height 280 mm Machine weight: 12,000 kg Space requirement (LxWxH): 5.2 x 3.4 x 3.3 m Equipment features: Internal cooling (IKZ): 30 bar Chip conveyor: Discharging to the left, integrated 200 l coolant tank Coolant system Coolant tank: 400 l Measuring probe: 3 D, Renishaw RMP 60 with RMI receiver (wireless version) Optional use of external cooling with compressed air or emulsion Direct path measuring system: Heidenhain Operating mode: 4 Separating plate for work table for pendulum machining Hardened flat guides Counter guides coated with sliding surface (Turcite) Renewal of the sliding surface of the basic slide X/Y in 2022.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1148000080, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-travel: 1,000 mm Y-travel: 1,000 mm Z-travel: 1,000 mm C-axis: 360° Control: MillPlus IT Heidenhain Tool magazine Capacity: 60 slots Spindle Max. spindle speed: 12,000 rpm Spindle mount: SK50 DIN 69871 Table Clamping surface: 1,000 mm x 800 mm MACHINE DETAILS Total power requirement: 65 kVA Machine weight: approx. 24.5 t Space requirement: approx. 6.50 m x 5.20 m x 3.50 m EQUIPMENT - Pallet changer - Electric handwheel HR410 - 4th operating mode - BLUM Laser tool measurement - Vibration sensor - IKZ pressure level 40 and 80 bar - Rotoclear Air filter system Coolant system 980 l Ibodovrfnfjpfx Adrjf Chip conveyor

Condition: new, Year of construction: 2024, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC 640, Work area Travel X: 1,250 mm Travel Y: 950 mm Travel Z: 580 mm Clamping area (L x W): 1,360 x 960 mm Table load max.: 2,000 kg Spindle Ibsdpfx Aswptd Isdrof Technology: Direct drive Speed: 15,000 rpm Tool holder: HSK63-A General Tool changer: 30 positions Machine bed: High-strength Meehanite cast iron Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min Equipment Chip management: Scraper belt chip conveyor Chip flushing in the workspace Measuring system: Direct (linear scales) Coolant management: Internal coolant supply (ICS 30 bar) Parts and work area cleaning: Rinse and compressed air gun

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Isdpfxewmm D Ns Adrjbf Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data Iedpfx Aewlqpysdrebf - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Condition: like new (used), Year of construction: 2012, Model: MILL 2000 5 axis CNC SIEMENS 840 X, Y, Z (mm) 2000 - 480 - 630 Swiveling head (B axis) +/- 100°. Rotating spindle NC-WENDER with vice Bar machining Milling head 12.000 rpm / 140 Nm Tools 163 HSK-A 63 DIN 69893 IKZ 70 bar Heidenhain linear measuring system Measuring probe Iedpoiraffefx Adrobf 3D touch probe Renishaw Chip conveyor

Condition: excellent (used), Year of construction: 2015, operating hours: 14,094 h, functionality: fully functional, machine/vehicle number: UT 0609, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! 5-axis universal machining center with integrated 2-axis CNC rotary/tilting table TECHNICAL DETAILS Machine type Control: Heidenhain TNC 620 Travel path X: 1,520 mm Travel path Y: 520 mm Travel path Z: 460 mm Rapid traverse: 48 m/min Table Turning diameter: Ø 650 mm (removable to 500 mm) Table load: max. 500 kg Swivel range: -5° to +110° Milling spindle Speed: up to 12,000 rpm Drive power: 19 kW Torque: 121 Nm (10% duty cycle) Tool change Capacity: 24 tools (double arm changer) Tool size: ISO 40 according to DIN 69871A MACHINE DETAILS Control switch-on time: 31,943 h Machine switch-on time: 23,443 h Iedpov Iazxsfx Adrebf Spindle running time: 14,094 h Coolant Tank capacity: 200 liters Centrifugal pump: 83 l/min at 8 bar EQUIPMENT - Additional rigid table on the left in the work area - Full splash guard cover - Work area light - Hydraulic and heat compensation - Direct measuring systems for all axes - Preparation for high-pressure flushing - Chip conveyor - Manuals on CD-ROM - Laser probe U-series - Calibration burr with SK 40 tool holder - Preparation interface for Blum infrared measuring probe - Workpiece measuring probe for milling machine - SK40 pull stud - Software additional equipment: Touch system function Automatic kinematic measurement using touch system cycles Swivelling of the processing level and reundtuisch processing

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,200 mm, controller model: Heidenhain iTNC 530C, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, The machine was recently repainted (inside and out) Isdpfxsv D N Ime Adrebf TECHNICAL DETAILS X-axis: 2,000 mm Y-axis: 900 mm Z-axis: 1,200 mm Rapid traverse speed (X/Y/Z): 30 / 30 / 25 m/min Main spindle Speed range: 30 - 7,500 rpm Drive power: 25 kW Max. torque: 540 Nm Tool holder: SK 50 DIN 69871A Swivel range: ±115° Resolution: 0.001° Distance spindle nose - table Vertical: 0 - 740 mm Horizontal: 250 - 1,050 mm NC rotary table Faceplate diameter: 1,500 mm Table speed: 20 rpm Max. table load: approx. 1,500 kg Tool changer Capacity: 60 tools Tool holder: SK 50 Max. tool diameter: 110 mm Max. tool diameter with free adjacent tool box: 180 mm Max. tool length: 400 mm Max. tool weight: 15.0 kg Changeover time: approx. 8.0 s MACHINE DETAILS Dimensions: approx. 10.0 x 7.0 x 4.0 m Weight: approx. 33.0 t Connected load: 75 kVA Operating hours: The last service visit was in December 2019. At that time, the operating hour meter showed 42,554 hours, which was confirmed in writing by the manufacturer, AXA. The machine was dismantled in February 2020. EQUIPMENT - Swivel milling head, continuously adjustable positioning - Pick-up station - Coolant system with high-pressure cooling - Internal coolant supply - Oil mist extraction - Paper belt filter - Hydraulic unit - Measuring probe - Electric handwheel - Various tool holders (approx. 10 pieces) Rotary table is sold without the chuck shown. Any vises, tool holders, and jaw chucks shown are not included!

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: Heidenhain, controller model: TNC640, Control : Heindenhain TNC 640 Technology : Direct drive Speed : 12,000 rpm Power : 30 kW Torque : 176 Nm Ibodpfjtpm Stox Adref Taper : SK 40 Toolchanger : 40 stations Working area Movement X : 1,000 mm Movement Y : 600 mm Movement Z : 650 mm Fixed Table (X/Y) : 1,100 x 600 mm Load capacity : 1,200 kg Others Rapid traverse (X/Y/Z) : 36/36/32 m/min

Year of construction: 1996, condition: good (used), machine/vehicle number: Nr.: 171, BAZ Alzmetall 35 CNC incl. chip conveyor data see photos Dimensions LxWxH 3700x2270x2820 mm chip conveyor 800x4000x1500 mm Function untested Ibedehfwq Eopfx Adrsf

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,850 mm, travel distance Z-axis: 1,000 mm, feed length X-axis: 20,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 20,000 mm, Droop & Rein Modimill built in 2001 Fidia C20 Iedpfx Adovk Ubxjrsbf