Used center lathes 0-299mm turning diameter over bed for sale (120)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Technical Data: >> Year of manufacture: 1992; Machine No. 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Features: switching mm/inch, coordinate mode selection ABS/INC, halving of display value, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> Collet chuck with NEW collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change toolpost with 4 steel holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Operating manual, spare parts diagram Rsdpfx Ahox Eb A Uozsbt About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is of course fully functional. The carriages all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces with ground finish quality. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: good (used), Leadscrew and feedscrew lathe type Celtic 12 Centre height: 160 mm Centre distance: 500 mm Spindle speeds: 35 - 1560 rpm Multifix tool holder A Lathe chuck Live centre Rbodpfxox Dy U Ts Ahzet

Condition: used, Year of construction: 1997, total length: 1,500 mm, total width: 800 mm, total height: 1,500 mm, Empty weight: 700 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1101050 - Drive system: Conventional - Power [kW]: 4.2 - Centre height [mm]: 125 - Swing over bed [mm]: 250 - Carriage turning diameter [mm]: 160 - Distance between centres [mm]: 500 - Bed width [mm]: 160 - Spindle bore [mm]: 38 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 3000 - Transport dimensions: 1500mm x 800mm x 1500mm (l x w x h) Rbjdpfx Aox Dyqujhzot - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1974, LZ-Lathe Fabr.Boley Type: 6 LZ Year 1974 Rbsdpfx Aheqw U Uwozjt Center height : 140 mm center distance : 500 mm spindle speed : 28-3550 rpm spindle bore : 32 mm collet chuck device, 3-jaw chuck, quick-change tool holder Parat. Machine documentation available, machine can be demonstrated under power.

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm In good condition. Redpewah Rqjfx Ahzjbt See data sheets for details.

Condition: used, Year of construction: 1962, functionality: fully functional, center height: 205 mm, center width: 1,200 mm, bed width: 320 mm, overall weight: 1,200 kg, Leadscrew and feedscrew lathe Meuser M0L - Year of manufacture: 1962 - Fully functional, connected, ready for demonstration - Centre height: 205 mm Rbjdpox Ihanofx Ahzjt - Centre distance: 1200 mm - Spindle bore: 47 mm - Spindle speeds: 28 - 1250 rpm - Bed width: 320 mm - Total power requirement: 5.5 kW - Machine dimensions LxWxH: approx. 2.30x1.10x1.25 m - Weight: approx. 1200 kg - Extensive accessories (see photos) - Serial no.: M0L - 30158

Condition: good (used), Year of construction: 1980, Center height: 130 mm Swing over bed: 260 mm Swing over cross slide: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 Size 5 Drehdurchmesser über Support: 140 mm (repeated, omitted for English) Spindle speed range: 35.5 - 3150 rpm Feed range, longitudinal: 0.04 – 0.4 mm/rev Feed range, cross: 0.02 – 0.2 mm/rev Rbsdpfjxz Rfksx Ahzot Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 - 36 pitch Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2140 x 850 x 1400 mm Weight: 1100 kg Accessories / Special Features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change toolpost system “Multifix” Size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake linings and gearbox newly mounted Delivery time: approx. 2-3 weeks Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1995, Digital display Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock Rbodpfxjwhrg So Ahzjt

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Rjdpon Ard Dofx Ahzobt

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured Redspz Hubjpfx Ahzsbt - Chip rear wall - Operating instructions - Used as seen -

Condition: good (used), functionality: fully functional, Used EMCO EMCOMAT 14D lathe in good condition Toolmaker's precision Travel in X/Z: 135 / 590 mm Distance between centers: 650 mm Center height: 140 mm Infinitely variable speed control Constant cutting speed MAIN SPINDLE Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Guideways hardened and ground 3-point mounting of the machine bed Diagonally ribbed, induction-hardened machine bed Rigid, split leadscrew cover Electromechanical spindle brake Chuck guard The machine is equipped with the following options: Quick-change tool holder EMCO 3-AXIS POSITION DISPLAY (TURNING) Rbodsx Emp Ajpfx Ahzst Chip protection door Machine lamp Coolant device Tool drawer Current new price: approx. €32,130 gross, plus the listed options Can be demonstrated and tested under power. Free loading by forklift or crane.

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Rbsdpfxoxyh Ndo Ahzjt Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Redpsu Uh U Ijfx Ahzjbt

Condition: excellent (used), functionality: fully functional, Schaublin lathe type 125B in very neat condition. Rbjdpox Auv Aofx Ahzjt Specifications: - Swing over bed: 270mm - Distance between centers: 500mm - Spindle speed: 40–3000 rpm Accessories: - Heidenhain digital readout ND780 on 2 axes - Multifix toolholder with 6 holders - 3-jaw self-centering chuck with inside and outside jaws - Set of change gears - 2 x drill chuck - Live center - Machine feet - Drive flange - Set of collets with drawbar - Machine lighting

Condition: good (used), MOMAC SC 200 NC teach-in turning machine Fagor 8050 TC CNC control year of construction 1999 max. turning diameter 400 mm max. turning diameter above bed 200 mm max. turning length 1000 mm speed 0-2300 rpm spindle passage 52 mm tool changer 8 positions 1x fixed pair of glasses 1x glasses moving including tool holders/extra jaws and documentation Rbjdpfx Ahstt Atdszjt machine is connected for inspection

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Rsdpow I A Uxsfx Ahzsbt Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 Rbjdsu Aftgjpfx Ahzst >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm Rjdpfx Ajvtp Edjhzjbt >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8 from training workshop Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 3768 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Rodpfjvkfhpox Ahzjbt Accessories and equipment: >> 3-axis digital display from Easson ES8 >> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube >> 1 three-jaw chuck with 2 sets of jaws >> 1 four-jaw chuck with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Bed stop >> Turning device To the machine : We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Rbjdpfx Ahjvivmyezet Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: Rodpfx Aew Idllehzebt >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 Rodpfxow Dvv Aj Ahzjbt - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Year of construction: 1970, condition: used, Center lathe Reiden R200 Redpfxehtaaue Ahzjbt Center height 200mm center width 1000mm 380V speed 16 - 1580 rpm

Condition: good (used), functionality: fully functional, Type 4 Rbjdexyqm Sjpfx Ahzet Technical data : Center width approx. 400 mm Center height above bed 120 mm 24 speeds from 71 - 2240 rpm Drive power 0.6 / 0.8 kW Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Rjdpfxsxykafo Ahzebt Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE