Lead/traction spindle lathe

Weiler Primus VC

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, turning length: 500 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 30 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 30 rpm, Equipment: rotational speed infinitely variable, Distance between centers: 500 mm Center height: 140 mm Spindle bore: 40 mm Speed: 30 - 4000 rpm Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Fedpfx Ajvnr E Njfnspb Accessories: Operating instructions, lamp, multi-fix holder, collet chuck (at extra cost) Other accessories on request

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Fpjdpjhvml Isfx Afnjb Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: used, Year of construction: 1999, functionality: fully functional, Weiler Primus VC lathe, year 1999, equipped with a 3-axis Siemens digital readout, 3-jaw chuck, Multifix toolpost, rear splash guard, and electric chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by appointment. Fodpfox Afvgex Afnepb

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Fpedpfsv Ifxijx Afneb Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix tool holder, 24 longitudinal feeds, Metric thread, Inch thread,

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Travel paths • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines Fpjdpfx Ajv Dhw Tjfnsb - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: used, Year of construction: 1999, turning diameter 150 mm turning length 500 mm total power requirement 4 kW Fedpfx Afsvm Dv Denspb weight of the machine ca. 0,8 t

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: Fodjv D Ip Njpfx Afnepb - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 390 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 1,300 mm, bar passage: 65 mm, total height: 2,700 mm, total length: 7,000 mm, total width: 3,000 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Manufacturer: DMGMORI Type: CTXbeta1250TC Year of manufacture: 2008 (retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment: - automatic tool changer - swivel head as B-axis - belt filter system with internal cooling and chip conveyor - differential pressure clamping main/counter spindle - workpiece collection device - preparation for bar loader (optionally available) Technical data: Max. turning diameter 500 mm X-axis 450 mm Y-axis 100 mm Z-axis 1300 mm B axis 220 ° Spindle bore 65 mm Speed 5000 rpm Spindle power 34 kW Counter spindle speed 6000 rpm Counter spindle passage 52 mm Counter spindle power 20 kW Tool changer 24 B-axis mount HSK 63 B-axis spindle speed 12000 rpm B-axis power 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant device: Yes Internal coolant supply: Yes Options: · Full cabin · NC swivel head as B-axis · Coolant device and chip conveyor · Documentation · Geometrically within the new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer's tolerance for new machines - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) renewed Fpjdoubyv Rspfx Afnob - sliding plates overhauled - hoses and cables overhauled, drag chains revised - cabin doors repainted, viewing windows renewed - maintenance carried out according to manufacturer's specifications

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 864, center height: 140 mm, center width: 500 mm, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Digital display: Available Control: Siemens Sicomp IMC 05 Center height: 140 mm Center distance: 500 mm Clamping system Three-jaw chuck: Available Quick-change toolholder: Available Tailstock Type: Available Further information according to manufacturer - without guarantee Center distance: 500 mm Center height: 140 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 150 mm Main spindle Spindle head according to DIN ISO 702-3: Size 5 Spindle diameter in front bearing: 70 mm Fsdpfx Afov N Inionjpb Spindle bore: 43 mm Inner taper depth of the main spindle: 50 mm Main drive Drive power (100% duty cycle): 4 kW Speed range: 30 - 4,000 rpm Number of Gears: 1 Number of speeds: continuously variable Feed drive Number of feeds: 24 Feed range longitudinal/transverse: 0.02 - 0.63 mm/rev / 0.006 - 0.2 mm/rev Threading range Metric threads: 0.25 - 8 mm Inch threads: 80 - 2 TPI Tailstock Quill diameter: 40 mm Quill stroke: 85 mm Quill taper mount: MT 3 Machine dimensions Length x width x height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Fpodpfx Afew Ebdbsnjb Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: used, Year of construction: 2014, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately). Fpsdpfx Afovx Uvfenob