Used Weiler Primus 2 for sale (197)

Condition: good (used), Year of construction: 1987, CNC turning machine WEILER Primus 2 CNC, serial number 151, CNC control system by Bosch. Cjdpfxoz R R Eij Aiieri

Condition: good (used), Turning diameter 160 mm Turning length 500 mm Swing diameter over bed 400 mm Swing diameter over cross slide 220 mm Main spindle Main spindle bore 51 mm Spindle speed 5,000 rpm Csdpfxszwpl Ie Aiieri Bar diameter 42 mm Chuck diameter 160 mm Number of tool positions 12 Tailstock quill stroke 50 mm Tailstock spindle taper MK3 Travel - x 250 mm Travel - z 550 mm Total power requirement 30 kW Machine weight approx. 4,000 kg

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected while powered on. Technical data: Center distance: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MK 2 Credpfex Htf Hex Aiiji Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge. Crsdpfoz A Tgqox Aiisi

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> Crjdpfx Ajvivmyjiisi To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: used, functionality: fully functional, Mechanic’s lathe Manufacturer: WEILER, Model series: MDU 260 Technical data Manufacturer: Weiler Codpfj Ahql Isx Aiijri Type: MDU 260 Distance between centers: 500 mm Center height: 125 mm Swinging diameter over bed: 260 mm Swinging diameter over carriage: approx. 150 mm Speed range: 110 to 3,600 rpm Spindle bore: 28 mm Dimensions: approx. L 1.10 x W 0.50 x H 1.20 m Weight: approx. 350 kg Equipment • Collet set • Drill chuck • 3-jaw chuck, 2 sets of soft jaws • Multifix holder • 2nd drawbar + set of collets • Following center • Various HSS tools All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, machine/vehicle number: 1047, Used lead screw and feed spindle lathe WEILER LZ 280 Center height 125mm Center distance: 800mm Spindle diameter: 24mm Spindle speeds from 50-1,600 rpm with 3-jaw chuck Ø 125mm, quick-change tool holder size A with 2 holders, Digital display with scale for cross travel (1-axis), chip guard, control panel with switch cabinet, tool cabinet. Machine has been partially overhauled and repainted. Cedpfx Ais Ah Tl Djijri Machine is located at our facility in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by appointment.

Condition: used, functionality: fully functional, Mechanic's lathe Manufacturer: WEILER, Model series: MDU 260 Technical data Manufacturer: Weiler Type: MDU 260 Distance between centers: 500 mm Center height: 125 mm Swinging diameter over bed: 260 mm Swinging diameter over cross slide: approx. 150 mm Spindle speed range: 220 to 1,800 rpm Spindle bore: 28 mm Csde Ahqlkspfx Aiisri Dimensions: approx. L 1.10 x W 0.50 x H 1.20 m Weight: approx. 350 kg Equipment • 2 tool stations with Multifix holders • Drill chuck • Rotating center • Habel tailstock with collet chuck + set of collets • Various HSS tools All information is subject to change without notice. A demonstration under power is available at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm Cedpfxevtp Edo Aiiori >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws Crsdpfx Aisu Aftgeiji >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G, machine number 2679, in excellent condition, with draw and lead screw. Includes 3 chuck jaws 125mm, tool holder, and 4x Multifix AD2090 tool holders. Credoz Eqn Dspfx Aiisi Can be inspected and tested while powered on.

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key Crjdpszbc Daofx Aiiji - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key Cedpfx Aozbc Dtoiisri - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: used, L + Z lathe WEILER, type LZ PRIMUS GS Machine no. 1984, year of manufacture 1981 Distance between centers 400 mm Turning diameter over bed 250 mm Height of centers over bed 125 mm Turning diameter over carriage 140 mm Height of centers over carriage 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm, 18 steps Feed in longitudinal and facing directions Chuck flange, short taper DIN 55022, size 4 Tailstock internal taper MK 2 Drive power 1.1 kW and 1.5 kW, pole-reversing Cjdpfxjz N H Dqj Aiijri Power supply 380 volts, 50 Hz - Spindle speed controlled via 2 motor speeds and 9 gear stages - 3-jaw chuck WEILER, Ø 125 mm, with soft jaws - Quick-change tool holder MULTIFIX with 2 interchangeable cassettes - Coolant system - Collet set Ø 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 15 / 16 / 18 / 20 mm - 1 centering point for collet chuck - Turning center flange - Emergency stop - Folding chuck guard with electrical monitoring - Splash guard Space requirement L x W x H 1200 x 650 x 1380 mm Weight 325 kg Good condition

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted. Crsdpfezr Rnyjx Aiioi

Condition: ready for operation (used), L & Z Lathe WEILER CONDOR VS incl. RSF Digital Display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm Csdpfx Ajzn Rahsiijri -Speed range 28 - 2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 38mm -Tailstock -RSF Digital Display -Multifix base with inserts -3-jaw chuck & quick-change jaws -Collets / quick-change chuck incl. collets -Drill chuck / rotating center -Bed stop -Chip guard -Coolant system -Emergency stop / On/Off switch -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 900 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 -Condition: “Good” -Maximum turning diameter: 165 mm -Swing over bed: 330 mm -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm -Automatic longitudinal / cross feeds Credpezvy T Tefx Aiiji -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop -Documentation

Condition: ready for operation (used), L & Z Lathe / WEILER CONDOR VS 2 with new 3-axis digital readout from training workshop - 3-axis digital readout "NEW" - Center height: 165 mm - Swing diameter over bed: 330 mm - Center distance: 800 mm - Speed range: 28 - 2800 rpm - Automatic longitudinal / cross feeds - Spindle bore - Tailstock with center Cjdpfoy Ral Ijx Aiijri - Collets / quick-clamping device incl. 25 collets - 3-jaw chuck Röhm 200 mm with reversible jaws - Multifix / new with insert - Work light - Emergency stop - Bed stop - Machine feet - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 2007, cycle controlled lathe Machine type: Weiler E 120 x 3.000 Control: Weiler D3 Year: 2007 Power on time: ca. 41.000 h Csdpjzizd Tsfx Aiijri SPECIFICATIONS Max. turning length: 3.000 mm Turningdiameter: 830 mm Max. swing over bed: 1.200 mm Bettbreite 600 mm Spindle bore: 165 mm Spindelkopf DIN55027 Gr 15 Collets: Forkardt 3KS 800mm Spindle speeds: 1 - 280 / 4 - 900 rpm Transmission ratio: 2 Torque: 8.000 Nm Amount of turrets: 1 Sauter 4-Fach Kopfrevolver für 140mm Aufnahmen Tailstock Quill diameter: 140 mm quill range: 400 mm Equipment Electronical handwheel Hydraulisches Kraftspannfutter Forkardt 3KS 800mm Chip conveyor

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm Crodpfxjy Tmkvj Aiiji >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, functionality: fully functional, Mechanic's lathe, manufactured by WEILER Cjdpfoz D Ut Isx Aiieri Spindle speeds, continuously variable Level 1: from 160 - 900 rpm Level 2: from 320 - 1800 rpm Technical data: Center distance approx. 500 mm Center height above bed approx. 125 mm

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm Cjdpfx Aisy T Hqceisri >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: excellent (used), Year of construction: 2004, Weiler Primus VC Lathe Primus VC with Heidenhain digital readout, year of manufacture 2004, in excellent original condition. The machine comes from the prototype workshop of a renowned German mechanical engineering company. CE compliant! Technical Data: Crjdpfxoy I U Dys Aiioi Year of manufacture: 2004 Weiler Primus VC Center height: 140 mm Center distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE conformity declaration About the machine: The Weiler Primus VC is the smallest machine in the Weiler range. The Weiler Primus VC is a lathe for the highest demands: with stepless speed control, constant cutting speed, and a powerful 4 kW drive (40% duty cycle). The compact machine of great quality is found wherever maximum precision is required in limited spaces: such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a Weiler Primus VC lathe with Heidenhain digital readout, year of manufacture 2004. This lathe is in excellent, original condition. It comes from an operation where it was lightly used only for prototype construction. Very easy-to-use controls. The guideways are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically tested by us. Take the opportunity to view and test the Weiler Primus VC under power at our site. Further lathes from well-known manufacturers can be found on our website.

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, spindle motor power: 4,000 W, total height: 1,700 mm, total width: 890 mm, overall weight: 1,050 kg, bar diameter (max.): 43 mm, product length (max.): 1,570 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details. • Machine Type: Centre Lathe • Turning Length / Distance Between Centres: 500 mm • Swing Over Bed: 280 mm • Swing Over Cross Slide: 150 mm • Spindle Nose (DIN 55027): Size 5 • Front Bearing Diameter: 70 mm • Spindle Bore: 43 mm • Main Spindle Internal Taper: ME 50 • Drive Power (100% Duty Cycle): 4 kW • Spindle Speed Range: 30 – 4,000 rpm • Number of Feed Rates: 24 • Longitudinal Feed Range: 0.02 – 0.63 mm/rev • Cross Feed Range: 0.006 – 0.20 mm/rev Crodpfx Aezpwh Ujiiji • Metric Thread Range: 0.25 – 8 mm • Inch Thread Range: 80 – 2 TPI • Module Thread Range: 0.25 – 4 Module • Diametral Pitch (DP) Thread Range: 200 – 5 DP • Tailstock Quill Diameter: 40 mm • Tailstock Quill Travel: 85 mm • Tailstock Taper: MT3 • Operating Voltage: 400 V • Control Voltage: DC 24 V • Connected Load: 7.5 kVA • Nominal Current: 15.5 A • Frequency: 50 Hz • Main Fuses: 25 A • Machine Weight: 1,050 kg • Machine Dimensions (L × W × H): 1,570 × 890 × 1,700 mm Additional Equipment • 4-Position Quick-Change Tool Post PARAT Size 1, incl. 1 × WD 1/12 Tool Holder • 2 × WD 1/12 Tool Holders • Lever-Operated Collet Chuck for 173 E Collets • 13 × 173 E Collets, Clamping Range: 3–15 mm (1 mm Increments) • Fixed Steady Rest with Roller Jaws, Capacity: 15–100 mm • Movable Chip Splash Guard with Viewing Window • 8 × Levelling Elements Technical Specification Counter Spindle No Driven Tools No

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Crjdpov D Ip Nofx Aiisi Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -