Used Die-sinking EDMs with x-travel of 300-399mm for sale (55)

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, Charmilles Roboform 350 µ Year of construction 2007 C-frame construction Fixed table with lowerable basin Csb Etuerqf D Hszfjgt Travel: X=350 mm, Y=250 mm, Z=350 mm Max. Workpiece size: X=780 mm, Y=530 mm, Z=300 mm Max. Workpiece weight: 500 kg Max. Electrode weight: 50 kg Distance table - chuck: 150 - 450 mm Working current 64 Ampere Best achievable surface Ra 0.1 µm Integrated Accura C-axis Linear glass scales with 0.05 µm measuring resolution Incl. pneumatic chuck Erowa ITS 50 Incl. 32-fold electrode changer (rotary) Machine weight (net): 2800 kg Machine dimensions (L x W x H): 1900 x 1690 x 2522 mm The machine is cleaned, serviced and then tested after receipt of order. We are also happy to commission the machine for you.

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: documentation/manual, This Zimmer & Kreim die-sinking EDM machine from 1992 is for sale. The PEC 850 machine is in good used condition and has always been well looked after and serviced. Most recently, the entire z-axis was overhauled (spindle, bearings, etc.). The machine can be viewed by appointment in 42697 Solingen. It is currently out of service because a control board needs to be replaced. If you are interested in purchasing it, we will do this before the viewing. The machine is sold without guarantee or warranty. Returns are not possible. Errors in the description excepted. Cob Etov Dgy Tjuzfegt

Condition: used, table length 400 mm table width 300 mm Cobevwgq Se Etuzfegt x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm

Condition: used, TECHNICAL DETAILS - Table dimensions : 700 x 480 [mm] - Dielectric capacity : 600 [l] TRAVELS - Travels on X/Y/Z axes : 350 x 250 x 250 [mm] - Travels on U/V axes : +/- 90 [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 900 x 680 x 250 [mm] - Max. part weight : 400 [kg] - Finishing quality : 0.125 [μm] WIRE GUIDE - Wire diameter : 0.15 - 0.30 [mm] - Coil weight : 5 - 8 [kg] - Speed : 30 - 270 [mm/sec] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] Cgob Etjuhq Rlsuzfot WEIGHT & DIMENSIONS - Machine floor space : 2500 x 2500 [mm] - Machine height : 2200 [mm] - Machine weight : 2890 [kg] MACHINE HOURS - Number of working hours : 1266 [h] EQUIPMENT - CNC : Charmilles Pentium III CPU - Remote control - Cooling unit

Year of construction: 1991, Condition: used, Vertikal EDM machine with accessories as shown in the pictures. Cgob Etuol Sm Nlozfot

Condition: excellent (used), Year 1998 Cgjb Etjvzk Nmjuzfet Table size 397 x 300 mm Longitudinal movement 300 mm Transverse movement 250 mm Vertical movement 250 mm Tool changer 4 EROWA holder Magnetic plane, 405 x 200 mm Cooling water system

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, AGIE Spirit 2 Year of manufacture 2008 Travel paths (X/Y/Z): 350 x 250 x 250 mm Max. workpiece dimensions: 630 x 400 x 185 mm Max. workpiece weight: 200 kg Integrated C-axis, speed U=0-40 1/min Manual bath height adjustment Generator AGIE APG Spirit Removal rate: 600 mm³/min Best surface: Ra 0.2 µm 4-way electrode changer in the magazine Operation via 15" flat screen with mouse Jog box for manual operation Cobevzpr Te Etuzfegt Simple program creation via AEP Machine dimensions: 1850 x 2100 x 2360 mm Total weight: 1280 kg The machine is cleaned, fully serviced and extensively tested by us. We are happy to offer we offer you the following optionally: - Transport - Commissioning and instruction - Clamping devices - Dielectric

Condition: used, Year of construction: 2007, Diesinking / EDM Cgjb Etsvt Syksuzfjt Travel distance X: 350 mm Travel distanceY :250 mm Travel distance z: 350 mm table size X: 600 mm table size Y: 450 mm max. workpiece size X: 650 mm max. workpiece size Y: 420 mm max. workpiece size Z: 250 mm max. workpiece weight: 400 kg cooler

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,370 h, Functionality: fully functional, machine/vehicle number: 592.100.023, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, table width: 400 mm, table length: 600 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-Y-Z travel paths: 350 x 250 x 300 mm X/Y axis speed: 6 m/min Z axis speed: 15 m/min Integrated C axis: ACURA-C Working area Working tank dimensions: 900 x 630 x 350 mm Dielectric unit content: 500 l Max. table dimensions: 600 x 400 mm Distance floor/table: 1,000 mm Min./Max. Distance between table and quill: 170 / 520 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Filling height: 0 - 290 mm Tool and electrode changer Electrode changer: 40 places Number of tools: 60 Generator type: ISPG Working current: max. 60 A Robot Easy ERE-009410 Base: Robot Easy UPC Max. transfer weight: 250 kg (for UPC pallets) Control: EROWA control and interface cable Control: Pneumatic chucks Gripper: RCS 5 Magazine plate: UPC with 4 positions (320 x 320 mm) Total weight: 1,500 kg Cooling Control cabinet: Integrated air/water heat exchanger Dielectric: Integrated dielectric/water heat exchanger Control Operating system: Windows XP Data input: 15" LCD color screen, mouse or touchscreen Software: AGIEVISION 5 or DPControl MACHINE DETAILS System dimensions: 1,410 x 2,460 x 2,660 mm System dimensions including robot: 2,600 x 2,500 x 2,700 mm Net weight without dielectric: 3,830 kg Space requirement: 3,400 x 4,400 mm Fire extinguishing system: Automatic CO2 fire extinguishing system Form 2000 Switch-on time: 100,549 h EDM hours: 41,371 h EQUIPMENT Cgsb Etovxrqtouzfet - Automatic CO2 fire extinguishing system Form 2000 - Robot Easy ERE-009410 with EROWA control, gripper RCS 5, and magazine plate UPC - MTS Gripper Link Rapid - Integrated air/water heat exchanger and dielectric/water heat exchanger - Without magnetic table

Condition: used, TECHNICAL DETAILS - Table dimensions : 700 x 480 [mm] - Dielectric capacity : 600 [l] TRAVELS - Travels on X/Y/Z axes : 350 x 250 x 250 [mm] - Travels on U/V axes : +/- 90 [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 900 x 680 x 250 [mm] - Max. part weight : 400 [kg] - Finishing quality : 0.125 [μm] WIRE GUIDE - Wire diameter : 0.15 - 0.30 [mm] - Coil weight : 5 - 8 [kg] - Speed : 30 - 270 [mm/sec] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2500 x 2500 [mm] - Machine height : 2200 [mm] - Machine weight : 2890 [kg] MACHINE HOURS - Number of working hours : 266 [h] EQUIPMENT Cob Etuzouhq Rfsfjgt - CNC : Charmilles Pentium III CPU - Remote control - Cooling unit

Year of construction: 1989, Condition: not inspected (used), Control Sodick Mark XI Travels X / Y / Z: 350 x 250 x 280 mm Travel C: 360 ° 16-fold tool changer extinguishing system Cobod Ra Abj Etuzfsgt

Condition: used, Spark erosion machine Manufacturer: Charmilles Technologies Model: Form 2 – LC Year of manufacture 1992 Generator: 50A Cjb Eovld Iwstuzfogt Space requirement: 1200 x 1300 x 2200 mm (LxWxH) Weight: 1100kg Work basin: 800 x 480 x 250 mm (LxWxH) Travel paths X/Y/Z: 300 x 200 x 150 mm Electrode weight: max. 60 kg Workpiece weight: max. 500 kg Equipment: - 3-axis digital display Heidenhain VRZ 760 - System 3R clamping device - Machine light - Fire extinguishing device The machine can be demonstrated on site under power. All information without guarantee Subject to errors and prior sale

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 315 mm, workpiece weight (max.): 500 kg, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Heidenhain dialog control TNC 223 B Planetary functions: available Magnetic tape drive: available Rotary spindle: available C-axis: controlled Work table Cob Eevt S Smetuzfegt Dimensions (L x W): 576 x 400 mm Dielectric height above table: 265 mm Maximum workpiece weight: 500 kg T-slots number x width: 3 x 10 mm Distance table - spindle: 475 - 160 mm Work head Adjustment range X-Y: 350 x 250 mm Adjustment range Z: 315 mm Resolution X-Y-Z: 0.001 mm Resolution C-axis: 0.001° Rapid traverse speed: 1000 mm/s Maximum electrode weight with/without rotation: 15 / 50 kg Dielectric supply Filter system: paper candle filter Cooling: electrically controlled heat exchanger Capacity: 200 l Paper candle filter: 3 pieces Accessories and equipment Electrode changer: 16-way Chuck: EROWA Rinsing distributor: 14-way Rinsing volume regulator: 15 levels C-Box: available MACHINE DETAILS Dimensions (H x W x D): 2,465 x 840 x 1,395 mm Weight: 1,850 kg Generator Dimensions (H x W x D): 1,800 x 600 x 920 mm Weight: 300 kg Rated current: 30 - 60 -120 A Connection value: 7 - 15 - 23 kVA

Condition: used, Year of construction: 2010, Diesinking / EDM Travel distance X: 300 mm Travel distanceY :250 mm Travel distance z: 250 mm table size X: 500 mm Cgjbjvtfwpo Etuzfet table size Y: 350 mm max. workpiece size X: 740 mm max. workpiece size Y: 470 mm max. workpiece size Z: 150 mm max. electrode weight: 5 kg max. workpiece weight: 550 kg electrode changer: 4 - time Fire extinguishing system

Condition: good (used), Year of construction: 1995, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 1,550 mm, total width: 1,800 mm, total length: 2,050 mm, A Charmilles Technologies die-sinking EDM machine of the Roboform 30 type is for sale The machine is fully functional and ready for immediate use Technical data Year of manufacture: 1995 X-path: 350 mm Y-path: 250 mm Z-path: 300 mm C-path: 360 ° Measuring resolution: 0.5 µm Working basin: 370*940*590 mm Capacity: 200 l Cgjbouy T Aqs Etuzfot Table: 500*400 mm max workpiece weight: 500 kg max workpiece dimensions: 350*750*525 mm Mains supply: 240 V/50 Hz/10 kA Dimensions: 2,050*1,800*1,550 mm Weight: 1870 kg Transportation and loading can be arranged on request, at an extra charge. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, TECHNICAL DETAILS - Strokes X x Y x Z : 350 x 250 x 350 [mm] - Max. part dimensions : 650 x 580 x 250 [mm] - Max. part weight : 400 [kg] Cjb Etuzsuhcbiefogt - Machining intensity : 72 [A] - Tools magazine capacity : 28 - Dielectric volume : 415 [l] - Machine floor space : 2.689 x 1.855 [mm] - Machine height : 2.593 [mm] - Machine weight : 3.000 [kg] - Welding hours : 39.554 [h] EQUIPMENT - CNC AGIEVISION with color screen LCD : 10,4 ['] - Deported electronic crank-handle - Axis C - Spindle chuck : EROWA - Automatic retractable tank - Integrated filtration : DAI 2

Condition: good (used), Year of construction: 1980, Travel X/Y/Z 350/250/300 mm, table size 480x360 mm, table - quill 450 mm, max. power 40 A; 4,8 kw; DRO Heidenhain, wire control system 3R, working hours 21383 h Cgsb Ejiv H Egjtuzfot

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, GF Machining Solutions FORM 200 mS Year of manufacture 2015 Die-sinking EDM machine in C-design Fixed table with lowerable container Travels (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Incl. pneumatic chuck Erowa ITS 50 or 3R Systems (optional) Max. Electrode weight: 50 kg Max. Inertia: 2000 kgcm² 32-fold electrode changer AC FORM HMI user interface Operation via 15" LCD color display with touchscreen Keyboard and manual control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg Cgjbeu Td Uhe Etuzfet The machine is cleaned and serviced by us after receipt of the order. This is followed by an erosion test. We will be happy to commission the machine on your premises and provide operating instructions. Optional: - Transportation - Cooling unit - Dielectric - Clamping device

Condition: like new (used), Year of construction: 2013, operating hours: 5,900 h, Functionality: fully functional, machine/vehicle number: 6388, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 50 kg, total height: 2,300 mm, total width: 2,350 mm, total length: 2,700 mm, table width: 400 mm, type of input current: AC, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 6 months, input voltage: 400 V, overall weight: 2,500 kg, input frequency: 50 Hz, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 15 m/min, Equipment: documentation/manual, EDM312MF20 Technical data: Adjustment travel: 450x300x300mm Workpiece clamping table 820x400mm Container size 900x520mm Filling height 300mm Distance table/electrode holder 150/450mm Workpiece weight max. 800Kg Dielectric max. 700l Dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz Power consumption 6.7 KVA Equipment: Color: light grey/blue MF20 user interface Display touch screen Cobou R Nvnj Etuzfegt Generator exopuls+ 60A Rev.4 Touch protection Linear scales in all axes X, Y, Z Cartridge filter 2 pieces Hydac cooling unit Co² extinguishing system C-axis Hirschmann 50/min, holding brake Overhauled Manual control bar with enabling button Automatic lowering container Chuck Erowa, 3R, Hirschmann Warranty 6 months Options: MF30 user interface Tool changer 20/30-fold Commissioning on site Training course Transportation

Condition: used, Year of construction: 2002, Diesinking / EDM Travel distance X: 350 mm Travel distanceY :250 mm Cjb Eevtfn Ietuzfegt Travel distance z: 315 mm table size X: 576 mm table size Y: 400 mm max. workpiece weight: 500 kg C-axis quill chuck: EROWA

Year of construction: 1983, Condition: used, Jig, Charmilles Robocut 220 workspace Cgjb Etuzebq Hmmsfjt X 450 mm Y: 340 mm Z: 250 mm

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] Cgsb Etuzsuhcbcefot EQUIPMENT - CNC FANUC 16W control - cooling unit - cooling tank with pump - automatic threading

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, TECHNICAL DETAILS Travel X: 350 mm Travel Y: 250 mm Z travel: 300 mm C-axis: available Cgeb Etst Tbiwouzfjt Table size X: 500 mm Table size Y: 400 mm Workpiece weight: max. 500 kg Electrode changer: 16-fold EQUIPMENT - Extinguishing system kraft & bauer

Year of construction: 2002, Condition: refurbished (used), AGIETRON IMPACT 2, year of manufacture 2002; AGIEVISION 3 control, Pentium III Travels: X = 350 mm, Y = 250 mm, Z = 350 mm; Max. workpiece dimensions (L x W x H): 650 x 580 x 250 mm o. 820 x 420 x 250 mm Max. workpiece weight: 400 kg Distance table to quill: 170-520 mm Quill with automatic chuck of choice (Erowa / 3R Systems); 28-position electrode changer; Working tank can be lowered for optimum accessibility; Incl. C-axis for rotation, indexing and erosion (U=0-60 rpm); AGIE IPG high power generator with 72 A Removal rate copper/steel: 450 mm³/min Removal rate graphite/steel: 530 mm³/min Best achievable surface Ra 0,2 µm 10,4" LCD colour screen, lift keyboard and mouse, JOGBOX for axis procedure Machine weight (net): 3200 kg Machine dimensions (L x W x H): 2689 x 1855 x 2593 mm Incl. 6-month warranty on parts and service; Incl. commissioning and instruction on site; Free loading! Cgjbeg H I Spo Etuzfjt Optional: Transport, cooler, oil, clamping device

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, AGIETRON Hyperspark 2 HS iQ Year of construction 2008 Travel: X = 350 mm, Y = 250 mm, Z = 350 mm; Max. Workpiece dimensions (L x W x H): 650 x 580 x 250 mm Max. Workpiece weight: 400 kg Distance table to quill: 170-520 mm Quill with automatic chuck of your choice (Erowa / 3R Systems); 28-position electrode changer Work bowl can be lowered for optimum accessibility; Incl. C-axis for rotation, indexing and erosion (U=0-60 rpm); AGIE IPG high-performance generator with 72 A Removal rate copper/steel: 550 mm³/min Removal rate graphite/steel: 600 mm³/min Best achievable surface Ra 0.2 µm 15" LCD color screen, lifting keyboard and mouse AGIEJOGGER with LCD display and electronic handwheel Machine weight (net): 3200 kg Machine dimensions (L x W x H): 2689 x 1855 x 2593 mm Incl. 6-month warranty on parts and service; Cobjut Uzge Etuzfjgt Incl. commissioning and instruction on site; The machine is cleaned, overhauled and tested by us after receipt of the order. We are also happy to commission the machine on your premises. We also offer the following as an option: - transportation - cooler - Dielectric - Clamping device