Used Dmf 220 for sale (4,962)

Year of construction: 2010, condition: new, Spare part for CNC BAZ Fabr.DMG MORITyp:DMF 220 LineaTeile sind Neu Ball screw for Y and Z axisGuide rails Packet for complete X axis with brake . Podpfx Aed S A Uneh Hjgg

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW Pjdpfx Ahetumqve Hjgg tool piece magazine with 100 pos. table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: Pedpfjtqmr Rsx Ah Hegg table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: good (used), Year of construction: 2004, operating hours: 5,012 h, functionality: limited functionality, machine/vehicle number: 15115221654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 100, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, Note: Minor relay error. TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Rapid traverse X-axis rapid traverse: 100 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Feed rate X-axis feed rate: 20 m/min Y-axis feed rate: 20 m/min Z-axis feed rate: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swivel spindle (B-axis): +90° to -90° Tilt-action of swivel spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control system Control system manufacturer: SIEMENS Control system model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h On-time: 17,969 h Connected load: 60 kVA Total length: 6,800 mm Total width: 3,900 mm Total height: 2,750 mm Pgodpfowd N D Tox Ah Hsg Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor - Continuously adjustable speed - Technical documentation and manual - Hydraulically clamped rotary axis - Tilting spindle with 2.5° indexing

Condition: like new (used), Year of construction: 2026, operating hours: 72 h, functionality: fully functional, machine/vehicle number: MT100SP, turning length: 350 mm, turning diameter over cross slide: 380 mm, turning diameter: 350 mm, spindle motor power: 12,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 50 mm, Super Precision Hard Turning Lathe Auto Matic loading and unloading and measurement options High precision accuracy 0.0001mm Hydrostatic technology Spindle runout 0.15μm X/Z axis positioning accuracy 1μm X/Z axis repeated positioning accuracy 0.2μm System resolution 0.01μm Pgsdpsvl S Dysfx Ah Heg Quality Guaranteed

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-300 is big efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: Hopper with Apron Feeder: 6 m3 Production Capacity: 220-340 Tons Per Hour Crusher Type: Cone Crusher Maximum Feeding Size: 225mm Vibrating Screen Size and Deck: 2200x5500mm 3-4 decks Pjdpfx Ajxrycaoh Hsgg Total Motor Power: 300 kW MCC-300 is a combination of: • Apron Feeder • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Model Year: 2007 Chuck Diameter: 8" Number of Axes: 2 Length: 500 Swing Over Bed: 300 mm Pedpfsx Npbiex Ah Hegg Spindle Speed (Rpm): 4000 Machinable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: excellent (used), The machine was built in 2007 and has only worked 5,000 hours. It was used exclusively to test casting molds, which explains the low operating hours. The machine can be inspected and tested under power in Germany – 64850 Schaafheim. For further information, please contact us. In addition to the machine, plastic granulates as well as various accessories and spare parts (see photos) are also available for purchase. ENGEL Victory 1050/220 Power, year of manufacture 2007. Location: The machine is located fully assembled in 64850 Schaafheim (Germany). Condition: The machine can be connected to power and demonstrated. Overall dimensions: Length: approx. 6,950 mm Width: approx. 1,800 mm Height: approx. 2,250 mm Weight: approx. 12,900 kg Pgedpjxldtiofx Ah Hjg Platen and tool specifications: Clamping plates: approx. 820 × 820 mm Tie bar spacing: approx. 570 × 570 mm Minimum mold height: 250 mm Maximum mold height: 700 mm Daylight: 950 mm Center bore: Ø 125 mm Main technical data Feature Description Manufacturer ENGEL AUSTRIA GmbH Machine type Victory 1050/220 Power Year of manufacture 2007 Machine no. 167023 Control system ENGEL CC control (touch panel, graphical user interface) Clamping force 2,200 kN (220 t) Screw diameter Suitable for HP 1 nozzle (Ø 50–120 mm) Injection pressure Up to 3,000 bar at 400 °C Injection volume (PS) Up to 1,600 cm³/s The machine can be inspected and tested at any time at our facility in Schaafheim by prior arrangement. Best regards

Condition: excellent (used), Four side planer KP5-220 made in Taiwan Pjdpfx Ahok Ttknj Hegg max planing width 230mm max planing height 130mm 2 sliding rollers in the tabletop number of spindles 5 motor of the fifth spindle is mounted on the floor feed on cardan shafts with smooth adjustment fully adjustable spindles machine works quietly without vibration, checked in very good condition, chrome tops

Year of construction: 1981, condition: used, plate thickness 4 mm blade length 250 mm angle adjustable from - to fest 90 Grad table surface area 900 x 800 mm Pjdpfep U Utfox Ah Hjgg total power requirement kW weight of the machine ca. 0,65 t dimensions 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: good (used), Year of construction: 2020, Used bandsaw from Karmetal Type: KMT Craft 220X250 DM Capacity: 220 x 250 mm Double mitre Self-descending Year of manufacture: 2020 Frequency inverter for the bandspeed Pgedpfjyfmh Djx Ah Hjg

Condition: ready for operation (used), Year of construction: 2011, stroke length: 350 mm, overall weight: 18,000 kg, pressing force: 224 t, This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information. Machine Benefits Qualitative Machine Benefits Psdox D Ey Ujpfx Ah Hjgg • Stability and robustness ensured by the heavy machine weight. • Reliable construction for long-term performance. Technical Machine Benefits • Power supply: number of phases: 3 • Versatile stroke to accommodate various bending requirements. Technical Specification Bending Length 6000 mm

Condition: good (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm Pjdeyffm Eopfx Ah Hogg -Weight: 1.8 kg

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. Pgodpewmn Szefx Ah Hsg In good condition with cooling and filter unit. Machine documentation available. See data sheet for specifications.

Condition: good (used), Year of construction: 2015, lifting height: 20,400 mm, fuel type: diesel, Empty weight: 3.460 kg Lifting capacity: 200 kg Working height: 2.240 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 7,25x2,1x3,01 Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220.2 Year of build: 2015 Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,00 m Total dimensions LxWxH: 7,25 x 2,10 x 3,01 m Platform dimensions LxW: 1,38 x 0,68 m Max. basket load: 200 kg Swivel range: 225° Ground pressure: 27 kN (vorne) / 16 kN (hinten) Ground clearance: 0,25 m Support width vertical: 2,10 m (vorne) / 2,10 m (hinten) Support width one side: 2,78 m (vorne) / 2,75 m (hinten) Support width both sides: 3,48 m (vorne) / 3,33 m (hinten) Support length: 3,95 m breit/ 2,98 m schmal Own weight: 3.460 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, maximum tilt angle 5°, loading area with side boards, automatic return to base position, lift automatic. Information: Tüv and UVV new Location: 41468 Neuss Pgodpfx Ahoxbq E De Hog immediately available

Condition: used, Year of construction: 2015, operating hours: 2,500 h, 2015 | Ruthmann TBR 220 S7 on Mercedes-Benz Atego 918 AF (22m) | Used Truck-Mounted Boom Lift | 2500 hours | 43042 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 102500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 56 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very well equipped all-wheel drive vehicle in good condition with a high-quality platform. With fire brigade equipment, all-wheel drive with 3 locks, Rockinger trailer coupling, reversing camera. New rear tires, energy guidance completely new in 2022. Pjdoydptgjpfx Ah Hogg 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39987 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2015, clamping force: 2,200 kN, Equipment: documentation/manual, Controll : CC300 Clamping force: 220 t Injection unit Screw diameter: 45 mm (S8 Screw Geometrie G1, LD20) 30% GF Shot volume: 318 cm3 Type: Horizontal Drive: Hydraulic Clamping unit Min mould height: 300 mm max opening : 758 mm Equipment: Euromap 67 Mould heating controll 8 zones 2x Pneumatic valve Psdjx H Awljpfx Ah Hogg 4x hydraulic valves 4x Core pullers Hours: ca 37000 Wittmann W818-4597 available Complete machine data on request.

Condition: excellent (used), Year of construction: 2011, Heidenhain i TNC HR 41530 control HR 410 portable electronic handwheel Table dimensions: 1000 x 450 mm Longitudinal travel: 750 mm Cross travel: 450 mm Vertical travel: 525 mm T-slots (width x number x pitch): 14 x 5 x 80 mm Rapid traverse (longitudinal and cross): 12,000 mm/min Rapid traverse (vertical): 12,000 mm/min Spindle motor power: 11 kW AC servomotor for longitudinal and cross axes: 7.5 Nm AC servomotor for vertical axis: 7.5 Nm Psdpfx Aoyc R Ngeh Hogg Spindle taper: ISO 40 Weight: 3,500 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Pedpjyc Ewxofx Ah Hegg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: new, Comau Smart 5 NJ 4 220-2.7 robot Axes: 6 Podpfetyvl Ujx Ah Hegg Year of production: 2018 Maximum load: 220 kg Working radius: 2738 mm Repeat accuracy: 0.15 mm

Condition: excellent (used), Year of construction: 2018, Quantity: 3 units Year of manufacture: 2018 Axes: 6 Max reach: 2700 mm Rated load: 220 kg Max load: 220 kg Positioning accuracy: ±0.06 mm Robot weight: 1,280 kg Control unit: C5G ACC3 E Pendant: TP5 Pgedpfx Ahjwxvy Dj Hog

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli OMK300 + UF 150/220 Podpfx Aeycv Emjh Hsgg Turning length: 300 mm Maximum square bar: 100x100 mm Minimum square bar: 20x20 mm Copy turning operation Drilling transfer UF 150/220

Condition: used, mileage: 16,250 km, power: 120 kW (163.15 HP), color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, power assisted steering, seat heater, - Passenger airbag - Electric window regulator - left - Electric window regulator - right - Driver airbag To ensure we can provide you with the best possible service, we kindly ask you to schedule an appointment. Mr. Kiel will be happy to assist you, Tel: B25 Electric parking brake BA3 Active Brake Assist BH1 HOLD function BS1 Brake calipers with Mercedes-Benz lettering C6L Multifunction steering wheel C74 Illuminated Mercedes-Benz entry sills CF8 Sports suspension CK8 Steering wheel heating CL1 Steering wheel adjustable for tilt and height CL3 Leather steering wheel CM2 Bumpers and attachments painted in body color CU4 Aerodynamics package D14 Anodized roof rails E07 Hill start assist E1D Digital radio (DAB) E1E Navigation E1T Touchpad E4S Smartphone integration package E7M MBUX multimedia system ED4 Fleece battery 12 V 92 Ah EL9 2-way speakers front and rear ES3 12V sockets for rear seat rows right and left ET4 Active Distance Assist DISTRONIC F1O Center console with storage compartment + cupholder, in front F2W Winter package F3Z Comfort locking F48 Heated windshield washer system F65 Exterior mirrors, automatically folding F66 Lockable glove compartment F69 Exterior mirror F71 Interior mirror auto-dimming FG9 Clip-on cupholders in rear armrests FH0 Piano lacquer trim elements, black FP3 Mirror package FS5 Illuminated mirrors in sun visors G43 9G-TRONIC H00 Warm air duct to passenger compartment H15 Heated seat for passenger H16 Heated seat for driver H20 All-round heat-insulating glass HH9 Semi-automatic climate control TEMPMATIC HZ0 Electric auxiliary heater HZ7 Semi-automatic climate control, TEMPMATIC for rear passengers IL5 Left-hand drive IL6 Metallic paint IN1 Wheelbase 3200 mm, short rear overhang J55 Seat belt warning for passenger seat JA7 Blind spot assist JA9 Traffic sign assist JB4 Active Lane Keeping Assist JB7 Parking package with reversing camera JH0 Widescreen cockpit JH3 Communication module (LTE) for digital services JP1 PRE-SAFE JW8 ATTENTION ASSIST JX2 Maintenance interval 40,000 km K51 Misfueling protection KB5 Main fuel tank 70 liters L LEFT-HAND DRIVE L45 MULTIBEAM LED with High Beam Assist PLUS LA2 Light assistant LB9 Exit lights LC4 Comfort roof control unit LC5 Surround lighting in exterior mirrors LC6 Lighting in rear grab handle with reading spot LC7 Footwell lighting in front LC8 Surround lighting tailgate LE1 Adaptive brake light LE4 Ambient cockpit lighting with 64 colors LE6 Night lighting, rear LG4 Tail, brake, and indicator lights in LED technology MG9 Generator management MJ8 ECO start/stop function MO5 EMISSION CLASS EURO 6e RDE5 M/N1 GR. II MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800 rpm MX0 BlueEFFICIENCY package P28 EASY PACK package, Pgedpfx Ajyfnthoh Hjg electric sliding door / tailgate P2Y STYLE Plus package Q50 Detachable tow hitch, ball-type QA4 Trailer load 2500 kg RY2 Tire pressure monitoring, front and rear axle, wireless SA1 Seat cushion depth adjustment, driver SA2 Seat cushion depth adjustment, passenger S... Metallic, alloy wheels, electronic immobilizer, ESP, navigation system, particulate filter, warranty, rain sensor, electronic...

Condition: good (used), Year of construction: 2002, Number of boring spindles 4 St. Pjdpfou N Iwnox Ah Hogg Working width 220 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 0,75 kW

Condition: used, mileage: 167,240 km, power: 120 kW (163.15 HP), first registration: 10/2014, fuel type: diesel, number of seats: 17, gearing type: automatic, emission class: euro6, color: blue, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1039 * MB Sprinter 516 * ORIGINAL EVOBUS - TRAVEL 65 * 120 kW / 160 HP – EURO 6 * Automatic transmission * LOW MILEAGE * TELMA retarder * Cruise control * Luggage compartment * Panoramic glazing * 15+1+1 passenger seats: LUX line seating * ALL SEATS EQUIPPED WITH 3-POINT SEAT BELTS * Adjustable seats (recline function) * Passenger compartment air conditioning * Separate driver’s climate control * Armrests * Tables with cup holders * Footrests * Luggage nets * Convector heating * Auxiliary heater * Parking heater * Reversing camera * One table installed * Overhead luggage racks * Reading lights * New windscreen * Large luggage compartment * Power outlet in the bus Psdpfoxc Sfzox Ah Hegg * Refrigerator * Repairs in January 2026: * New injectors for AdBlue * Propshaft renewed * etc. * All information without guarantee * Interim sale reserved * Please refer to our Terms and Conditions