Used CNC lathes up to 199mm turning diameter for sale (350)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Bedpfx Akszy N Nlonjdi Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, spindle motor power: 30,000 W, overall weight: 15,200 kg, controller manufacturer: FANUC, number of slots in tool magazine: 40, number of axes: 7, This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details. • Bed: Cast iron with linear roller guides on all axesLeft spindle (main) • Spindle nose: ASA A2-11 • Chuck: Hydraulic 3-jaw, Ø315 mm • Max available power from: 238 rpm • Max torque: 1,003 / 1,203 Nm • Built-in spindle motor; front bearing Ø160 mm Bedpfx Asz Eaz Tjknsdi • Spindle bore: 115 mm; draw tube ID: 103 mm • C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingRight spindle (sub) • Spindle nose: ASA A2-8 • Chuck: Hydraulic 3-jaw, Ø254 mm • Speed: 40–4,000 rpm • Motor power (low/high electronic range): 15/22 kW | 22/26 kW • Max available power from: 450 rpm • Max torque: 398 / 539 / 700 Nm • Built-in spindle motor; front bearing Ø130 mm • Spindle bore: 86 mm; draw tube ID: 77 mm • C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingAxis travels • B (upper turret rotation): 240° (±120°) • A (right spindle translation): 1,550 mm • C1/C2 (spindle rotation): ±360°Rapid traverse / feeds • X1 / Z1 / Y: 36 / 36 / 26 m/min • A axis: 30 m/min • B-axis rotation: 42 rpm • C1 / C2 axes: 400 rpm • X1/Z1 interpolation feed: up to 500 mm/revOrientable upper turret / milling spindle • B-axis driven orientable head with Roller Gear Cam (RGC) • Machining on either left or right spindle • B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A • Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30° • Spindle interface: Capto C6 (double-contact) • Speed: 60–12,000 rpm • Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW • Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm • Built-in motor; air sensor for tool clamping confirmation • Centralized cooling system; rigid tappingAutomatic tool changer • Type: Floor-mounted, double-arm; long-Z movable magazine • Drives: Servo-driven tool-change arm and tool-chain rotation • Taper: Capto C6 • Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s • Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied) • Max tool length: 400 mmMachining capacity • Max swing over bed: 1,000 mm • Max swing over carriage: 700 mm • Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined) • Max turning length between centres: 1,500 mm • Max distance between spindle noses: 1,540 mm • Y-axis through-hole capacity: Ø230 mm (±115 mm) • Max bar capacity: left Ø102 mm; right Ø76 mm • Max unsupported workpiece weight: left 400 kg; right 220 kgCoolant and standard equipment • High-pressure coolant through upper spindle: 12 bar • External coolant to upper spindle: 8 bar • Coolant tank capacity: 580 litres • Automatic lubrication system • Centralized hydraulic system with high-efficiency cooler • Electrical cabinet with heat exchanger • Work area lighting; 3-colour alarm/status lamp • Installation equipment; CE conformity declarationFANUC 31i-A CNC features • 10.4" colour LCD; extended keyboard • Manual Guide-i conversational programming • Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 052, turning length: 140 mm, turning diameter: 30 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 9,000 W, rotational speed (min.): 200 rpm, rotational speed (max.): 6,000 rpm, total height: 1,800 mm, total length: 1,800 mm, total width: 1,200 mm, type of input current: AC, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, Transco Drehautomaten GmbH Type (Typ): tc10 Serial Number (Nr.): 052 Year of Manufacture (Baujahr): 2023 Machine Category: CNC Automatic Lathe (Second Operation / Audrema® series) Maximum Part Length: 140 mm (120 mm shank + 20 mm head) Maximum Workpiece Diameter: 30 mm Bjdpsz Ih Hcofx Aknedi Production Rate: Up to 35 parts per minute Control System: Siemens CNC ControlMain Drive Power: Up to 9 kW Part Changing / Loading Times: Collet chucking (free drop): 1 s. Collet chucking (guided drop): 1.5 s. Three-jaw chucking: 2 s. Located in Israel l.

Condition: excellent (used), Year of construction: 2003, FOR SALE – LOT OF 8 MORI SEIKI CNC TURNING CENTERS Selling a single lot of 8 MORI SEIKI CNC turning centers, including: 8 MORI SEIKI CL-05 turning centers – year 2003. All machines are functional and complete, with their tools and tool holders. Chip conveyors included. Selling the entire lot only. Bjdpfxsz Tqp Eo Aknsdi Photos and further information available upon request. Price for the lot available upon request.

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 115 mm, total height: 2,600 mm, total width: 3,360 mm, overall weight: 3,500 kg, controller manufacturer: FANUC, controller model: FS30i, product length (max.): 1,620 mm, number of axes: 3, This 3-axis Murata MW100 Horizontal Twin-Spindle CNC Turning Center was manufactured in 2012. It features a maximum spindle speed of 4,500 rpm and a tool capacity of 2 × 8 positions. With a compact design and included chip conveyor, this machine is ideal for efficient turning applications. If you are looking to get high-quality turning capabilities, consider the Murata MW100 machine we have for sale. Contact us for further details. • Number of axes: 3+2 • Number of spindles: 2Tooling • Tool capacity: 2 × 8 positions • Tool holder: Not specifiedUtilities • Coolant pressure: 5 bar • Electrical consumption: 10 kWh • Compressed air consumption: 16.4 m³/hDocumentation • Electrical user manual: Yes • Mechanical user manual: NoNotes / Description • High-speed automatic CNC two-station/front turning machine • 3 units available Additional equipment • Chip conveyor: Included Bdsdpoz Hw Awsfx Aknei • Dimensions: 3,850 × 1,000 × 1,400 mm Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,200 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, For sale is a powerful and precise CNC lathe EMCO TURN 365 / E65, manufactured in 2007. The machine is equipped with a Siemens control system, powered tools on all 12 stations, a C-axis, a tailstock, and a matching EMCO COMPACT LOAD E65 short bar loader. The machine is in well-maintained condition and is ready for immediate use. Technical data: Manufacturer: EMCO MAIER Machine operating hours: 17,842 h Production operating hours: 3,369 h Model: EMCOTURN 365 / E65 Year of manufacture: 2007 Control system: SIEMENS Working area & travels: Travel X: 210 mm Travel Z: 610 mm C-axis: 360° (resolution 0.001°) Max. turning length (part length): 520 mm Max. turning diameter: ø 310 mm Diameter over bed: ø 600 mm Max. bar diameter: ø 65 mm Main spindle: Speed range: 60 – 4,200 min⁻¹ Drive power (100% / 60% ED): 15 / 18 kW Max. torque: 192 Nm Spindle connection: KK 6 (DIN 55026) Tool turret: Type: 12-position VDI 30 axial turret Powered tools: Yes, on all 12 stations (for milling & drilling) Accessories & equipment: Automation: Short bar loader EMCO COMPACT LOAD E65 Tailstock: Hydraulically operated (500 mm travel, MK4) Chip conveyor: Included Measuring arm: Tool setting measuring arm directly in the working area Part catcher, storage at chip conveyor Upon request, transport and loading can be arranged throughout Europe for an additional fee. Bedpoz Aknhjfx Aknedi Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying/selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring Bdedpfx Akoy Rnbdjnsi function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: excellent (used), Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 60022, turning length: 250 mm, turning diameter: 42 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 385 mm, travel distance Z-axis: 250 mm, spindle motor power: 7,500 W, total height: 1,900 mm, total length: 3,500 mm, total width: 1,900 mm, overall weight: 4,200 kg, i-42 Ultimate lathe • Number of controlled axes: 10 Bodpfx Akjzwmknjnjdi • Number of driven tools: 12 • Max. diameter: 42 mm • Max. length: 250 mm Includes a feeder – max. length 1 m.

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC Bjdpfx Asz Nx Rcjknsdi • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Bdodozt Iacjpfx Aknoi Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 25693, turning diameter: 150 mm, Specifications: Number of Axes: 3 Maximum Workpiece Diameter: 300 mm (approx.) Bdsdpezn Ay Tofx Aknoi Maximum Workpiece Length: 300 mm (approx.) Chuck Size: 6” (standard, options for larger sizes) Machine Dimensions: 2,400 mm x 2,200 mm x 2,500 mm (approx.) Machine Weight: 3,200 kg (approx.) Spindle Speed: Up to 6,000 RPM (standard) Spindle Power: 15 kW (continuous) Spindle Torque: 75 Nm Spindle Bore: 65 mm X-Axis Travel: 300 mm Y-Axis Travel: 250 mm Z-Axis Travel: 300 mm Rapid Traverse (X, Y, Z): 20 m/min (maximum) Feed Rate: 12 m/min (max feed rate in all axes) Number of Tool Stations: 6 to 12 tool stations Maximum Tool Diameter: 32 mm (in fully populated tool turret) Maximum Tool Length: 100 mm Positioning Accuracy (X, Y, Z): ±0.005 mm Repeatability (X, Y, Z): ±0.002 mm Spindle Runout: < 0.003 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 6,185 h, functionality: fully functional, Tsugami B0326E-II Long-Turn Lathe Manufacturer: Tsugami Bjdpfx Aszlp Sweknedi Model: B0326E-II Year of manufacture: 2018 Control: Fanuc 32i-B Technical data Max. bar diameter: 32 mm Max. machining length: 320 mm (with guide bush) Machining without guide bush: 70 mm Main spindle: 8,000 rpm Counter spindle: 8,000 rpm Tool spindles: 6,000 rpm Number of controlled axes: 6 Tool stations: 31 standard (optional up to over 40, depending on configuration) Driven tools Y-axis C-axis, main and counter spindle Rapid traverse up to 32 m/min Main spindle motor: 3.7 / 5.5 kW Counter spindle motor: 2.2 / 3.7 kW Connection power: 21.4 kVA Machine weight: approx. 3,500 kg Dimensions (L × W × H): 2,150 × 1,280 × 1,930 mm Equipment ✔ Fanuc 32i-B CNC control ✔ Counter spindle ✔ Y-axis ✔ C-axes ✔ Tool package ✔ Top Infinity bar feeder magazine ✔ Kraft & Bauer fire extinguishing system ✔ Coolant system ✔ Chip conveyor Very well-equipped Tsugami B0326E-II long-turn lathe from 2018 with Fanuc 32i-B control. The machine features a main and counter spindle, Y-axis, and driven tools, making it ideal for high-precision series production of complex turned parts up to Ø 32 mm. The scope of supply includes an extensive tool package, a chip conveyor, a Top Infinity bar feeder magazine, and a Kraft & Bauer fire extinguishing system. The machine is in good condition and is available for immediate delivery after consultation.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 34,000 h, travel distance X-axis: 570 mm, travel distance Z-axis: 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details. - Main Drive: 19 kW- Machine Control: NUM / Keller/Plus (IBM Monitor setup)- Maximum Torque Duty Cycle: 60% / 100%- Torque: 1800 / 1400 Nm- Max Rapid Traverse (Longitudinal/Cross): 10 / 5 m/min- Tool Turret: 8-position disc turret, Sauter VDI 30- Chuck: Forkardt three-jaw chuck installed, diameter 200 mm- Included Accessories: Steady rest- Operational Status: Out of service since mid-2023 due to operator retirement- Operating Hours: Approx. 34,000 hours (single-shift operation/power-on time) Bedpfszuyqcsx Aknedi Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2016, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2016 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):35 kW Torque (max.):120 Nm Barcapacity:65 mm Workpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motor spindle, integrated in tool carrier II Speed:7.000 rpm :Power (max.):12 kW Torque (max.):22,5 Nm Chuck:Hainbuch Spanntop Kombi Axfix Gr. 42 Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Toolcarrier II (X/Y/Z): Technology:Turret with 9 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Backworking attachment: Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron) Driven Tools:5 stations Tooldrive:12.000 U/min, 6,7 kW, 5,3 Nm Equipment/Accessory: Positionsensor:Direct Scales in X (up/down) Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbaletfilter and High-pressure, 80 bar Bdedpfx Aez A Nz Doknji Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Wasteheatmanagement:Interface for external chiller prepared Rawmaterialfeed:Barloader, FMB SL 80 V Finished part removal:Unloading device (NC-controlled) with coneyor belt Fireextinguishing unit:Kraft + Bauer Oilmistseparation:Electrostatic extraction LTA AC 3001 Further Accessory:Misc. used static and driven Toolholder

Condition: ready for operation (used), Year of construction: 2020, operating hours: 25,585 h, spindle speed (max.): 7,000 rpm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B, This SPINNER TTS 42 Lathe was manufactured in the year 2020 in Germany and has 25585 production hours. It is equipped with a Fanuc Series 31i-MODEL B control unit. The machine has a spindle speed of 7000 rpm. See tech specs file as PDF (German) attached for more details. Machine Benefits • main spindle was replaced 2023 • maintained internally • runs on emulsion • no fire extinguishing Qualitative Machine Benefits • Unimag interface for bar loading magazines • Parts conveyor belt • Spinner bar loading machine type servo. Make spinner, for spindles up to 42mm passage, for material d=4-42mm, length up to 3,200 mm • 10x external turning holder • 12x boring bar holders d=32 • 3x recessed boring bar holders • 6x straight agw • 3x axial agw • Material processed so far: aluminum, brass Technical Machine Benefits • Spindle 2 (counter spindle) in version up to 7,000 rpm - 42mm • Revolver 1 : 12-fold with cnc servo drive revolver 2 : 12-speed with cnc servo drive revolver 3 : 12-speed with cnc servo drive dmjgmx • Ejector unit integrated in counter spindle for ejecting parts into the parts catcher • Signal lamp on top of machine in three colors red/yellow/green as status display • Late conveyor as hinged belt conveyor exiting to the right, incl. Integrated coolant tank and return pump • Coolant system as additional tank incl. Submersible pump 80l/4bar, high-pressure pump up to 80bar / 19. 5l/min • Flushing gun in the work area • Holder for messtaster on the machine bed as preparation for the use of a • Messtaster for tool measurement switching in 3 axes. Bdjdpfx Aozx Ag Ioknei • Extraction d=200 to the working area for connection to extraction system

Condition: used, Year of construction: 2017, operating hours: 15,186 h, Equipment: documentation/manual, We are offering this used INDEX ABC 65 SL CNC lathe, manufactured in 2017. Machine type: ABC Year of manufacture: 2017 Operating hours (hydraulics): 15,186 Turret 1 with 7 stations, VDI 25, and W-gearing Synchronous spindle with chuck or collet possible! Turret 2 with 6 stations and dovetail mounting Powered tools on turret 2 Ejection blowing device Transmit function – Teleservice Bdodpfsz Ri Ibsx Aknsi Three rear boring spindles for fixed tools Magazine above the main spindle Conveyor belt Chip conveyor, hinged belt – workpiece removal device – workpiece feed unit INDEX LMI bar feeder magazines If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,245 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, total height: 2,060 mm, total width: 1,780 mm, overall weight: 3,600 kg, controller manufacturer: HAAS, controller model: NGC, product length (max.): 3,200 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2019. This HAAS ST-10 features a maximum turning diameter of 229 mm and a maximum turning length of 355 mm. It includes a spindle power of 11.2 kW and a maximum spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10 machine we have for sale. Contact us for further details. Main spindle Bdjdpfxez Izyij Aknei • Spindle nose: A2-5 • Max bar capacity: 44 mm • Max turning diameter: 229 mm • Max turning length: 355 mm • Max swing over bed: 413 mmTurret and axis travels • Number of tool positions: 12Tailstock • Type: Manual • Quill taper: MT3 • Tailstock travel: 508 mm • Quill travel: 95 mmElectrical supply • Voltage: 440 V (per machine nameplate) • Phases: 3Options included: • Measuring probe • 175 mm three-jaw chuck • Hainbuch SK52 collet chuck Technical Specification Counter Spindle No Driven Tools No Taper Size VDI 40

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, spindle motor power: 3,700 W, controller manufacturer: FANUC, controller model: Series 18-i-T, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Gildemeister GP 50 was manufactured in 2004. It features a twin-spindle configuration with independent electrospindles and a continuous C-axis on both spindles. The machine includes two independent Sauter turrets with a total of 24 tool positions, all suitable for driven tools. If you are looking to get high-quality turning capabilities, consider the Gildemeister GP 50 horizontal turning machine we have for sale. Contact us for further details. • Y-axis: No • B-axis: Yes (associated with sub-spindle) • C-axis: Continuous on both spindles • Spindles: • Main spindle: Independent electrospindle with continuous C-axis • Sub-spindle: Independent electrospindle with continuous C-axis • Twin-spindle configuration Bdodez D E Amjpfx Aknsi • Bar passage (main spindle): 50 mm • Turrets / driven tools: • 2 independent Sauter turrets • Tool stations: 12 + 12 (24 total), all positions suitable for driven tools • Driven tools: Yes (both turrets) • Main spindle turret: 12 driven tool positions • Sub-spindle turret: 12 driven tool positions • Machine configuration: • 5-axis configuration • No Y-axis • B-axis with sub-spindle • Independent main and sub-spindle • Twin independent turret configuration • 24 total tool stations • Driven tooling on both turrets Additional equipment • Bar feeder: Top Automazioni • Bar feeder passage: 70 mm • Automatic bar feeding system • Tooling / accessories included: • 12 tool holders for 20 × 20 mm or 25 × 25 mm square tools • 4 radial driven tool holders • 2 axial driven tool holders, 90° • 10 drill holders, 90° • Approx. 60 spindle collets in various diameters • Collet types: BA60 and BA52 • Collets for Top Automazioni bar feeder Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: used, GOODWAY GCL-2 LATHE FANUC O-T Series CNC Control Max. diameter, swing diameter: Ø 300 mm Maximum turning diameter, turning diameter: Ø 230 mm Standard turning diameter: Ø 220 mm Maximum turning length: 300 mm Turning length: 300 mm Maximum turning diameter: Ø 51 mm Maximum spindle bore diameter: Ø 66 mm Spindle mount: A2-6 Motor power (Continuous / 30 min.): 11/15 KW Maximum speed [rpm]: 4,500 rpm Maximum travel of the X-axis: 125 mm Maximum travel of the Z-axis: 320 mm Turret: 8 stations Machine dimensions: approx. 2480 x 1300 x 1635 [mm] Machine weight: approx. 3500 [kg]. Bdsdjztq Ehspfx Aknsi

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Bsdpfoz Rxg Hsx Aknodi Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm • Chuck diameter: 315 mm • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Bdjdozhwlqopfx Aknsi Additional equipment • Included tooling: 1 live tool + additional accessories (unspecified) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,041 h, spindle speed (max.): 2,800 rpm, controller manufacturer: SIEMENS, controller model: SIEMENS 828D, number of axes: 2, This Romi C 510 was manufactured in 2014. It has a hollow spindle with a Ø 65 mm spindle passage, a wedge bar manual chuck Ø 260 mm, and hardened guide surfaces. The tool holder is a Multifix steel holder head B K22. The machine operates at a standard spindle speed range of 56–2800 rpm and has automatic lubrication and cycle functions for efficient operation. If you are looking for a high-quality lathe, consider the Romi C 510 that we have for sale. Contact us for more information. Additional equipment • Console: Automatic cycle in the longitudinal direction with activation of console recess. Machine Benefits Technical Machine Benefits • Automatic features: tool clamping, hardening of guide surfaces, switching of milling spindle speed, frame cycles, and lubrication of guide surfaces. • Special versions: fully equipped, manual speed control, reduced speed range, manual tightening, numeric indicator for foreign production, and climate-controlled version without a control system. • Guide surfaces: hardened and plated counter surfaces. • Climbing milling: automatic device included. Bedex D I Iuspfx Aknjdi • Automatic tool clamping Extra Information Special Machine Versions: Raised milling headstock, automatic frame cycles, and compliance with foreign standards by agreement.Maschinenbeschreibung:CNC-Horizontal-Drehmaschine - ROMI C 510 V5.0 – SIEMENSStandardausführung:. Siemens-Steuerung 828D sl, mit 10,4” LCD-Farbmonitor. ASA A2-6" Spindelkopf, Drehmoment: max. 303 Nm bzw. ASA A2-8", max. Drehmoment 408Nm, mit 520mm Schwingdurchmesserüber Bett, 450 mm Schwingdurchmesser über Schlittenführung und 255mm Schwingdurchmesser über Planschlitten. Reitstock mit manueller Positionierung des Grundkörpers, mit manueller Betätigung der Pinole (stehende Zentrierspitze) MK-4. Eilgang längs/quer mit 10.000mm/min. Herausziehbarer Spänewanne. Elektroanlage lieferbar für folgende Spannungen/Frequenzen: 400VCA / 50-60Hz. Abgedichtete Arbeitsraumleuchte. ROMI RMMP manuelles Maschinenpaket, bestehend aus CNC gesteuertem Hauptschlitten mit zwei  elektronischen Handrädern für X- und Z-Achse, Joystick-Schaltern und der  bedienerfreundlichen Siemens Software "Manual Machine Plus". Adapterplatte Multifix K22 Type B mit Multifix Stahlhalterkopf B K22. Schleppeinrichtung für Reitstock. Automatische Schmierung mit Inline-Filter und Füllstandsensor. Kühlsystem, komplett mit Kühlmittelbehälter und Kühlmittelpumpe (10l/min,@7bar, 1,5kw/ 2cv). Kühlwasser Spritzpistole mit zusätzlicher Pumpe. Elektrischer Schaltschrank mit Kühlung über Zentrifugalgebläse und Überdruck. Spritzschutz, komplett, Schutztüre mit Sicherheitsfenster und Verriegelung durch elektrische Sicherheitsschalter. Schrauben und Muttern für Nivellierung. Schraubwerkzeugsatz für den Betrieb der Anlage. Vollständige Dokumentation für das ROMI-Produkt auf CD. Standardlackierung: Epoxidlack strukturiert Munsell-Blau 10B-3/4 und Epoxidlack strukturiert grau RAL 7035.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 215 mm, travel distance Z-axis: 1,250 mm, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 RatioLine was manufactured in 2000. It features a nominal power of 43 kW and a robust machine weight of 6550 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Index G300 RatioLine horizontal turning machine we have for sale. Contact us for further details. Bdedpfez Hb Nhsx Aknsi - Current Type / Frequency: 3 Ph / 50 Hz- Nominal Voltage: 400 V~- Control Voltage: 24 V-- Nominal Current: 78 A- Nominal Power: 43 kW- Cabinet Weight: 710 kg Technical Specification Counter Spindle No Driven Tools Yes

Condition: like new (used), Year of construction: 2019, functionality: fully functional, spindle bore: 30 mm, spindle speed (min.): 40 rpm, travel distance X-axis: 145 mm, travel distance Z-axis: 465 mm, rotational speed (max.): 4,000 rpm, center width: 650 mm, center height: 150 mm, load capacity: 1,200 kg, throat depth: 4,000 mm, For sale is a nearly new CNC lathe from OPTIMUM, model OPTIturn L28HS. The machine is in excellent condition. It comes from a vocational training institute (BFI) and was used exclusively for training purposes (setup and program transfer). Technical specifications: Control: Siemens Sinumerik 808D Advanced Bedsy D Hkqspfx Aknsdi Year of manufacture: 2019 First commissioning: 2021 Centre height: 150 mm Centre distance: 650 mm Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Speed range: 40–4,000 rpm Spindle mounting: ISO 702-1 No. 3, Form A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool changer: 8 stations Tool holder: VDI 20 X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MT2 Quill stroke: 80 mm Space requirements (L x W x H): 1,655 x 1,485 x 1,955 mm Note: Machine hours can be read on site if the necessary expertise is available. As the lathe was only used for training, a very low number of operating hours can be expected. Tools and tool holders are not included in the offer. Transport and loading can be organized throughout Europe at extra cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning diameter over cross slide: 120 mm, turning length: 120 mm, turning diameter: 60 mm, spindle bore: 34 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 100 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 170 mm, spindle motor power: 2,200 W, total height: 1,500 mm, total length: 1,200 mm, total width: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Z-axis: 15 m/min, overall weight: 1,058 kg, spindle nose: Ø 85 mm, For sale is an extremely compact 2-axis CNC lathe, the Poly Gim MINI-88, manufactured in 2022. Due to its very compact design, the MINI-88 is particularly suitable for the economical production of small and simple precision turned parts, for small series production, and for companies with limited space. The machine can also be integrated into existing production lines in a space-saving manner. TECHNICAL DATA Machine: Bdedowpgiwspfx Aknsi - 2-axis CNC lathe - Control system: Fanuc 0i-TF Plus - Year of manufacture: 2022 - Operating hours: 0 Machining range: - Max. machining diameter with chuck: 60 mm - Max. machining diameter with collet chuck: 26 mm - Turning diameter: 60 mm - Turning length: 120 mm - Bar capacity: 26 mm Main spindle: - Speed range: 100–5,000 rpm - Spindle motor: 2.2 kW at 100% duty cycle / 3 kW at 50% duty cycle Travel ranges: - X-axis: 150 mm - Z-axis: 170 mm Tool system: - Tool holder: 16 × 16 mm - Drill bar holder: Ø 20 mm - Smallest programmable unit: 0.001 mm - 8-station turret and linear system EQUIPMENT - Hydraulic 4-inch chuck - Hydraulic internal clamping device for chuck and collet chucks - Chip conveyor - Parts collector - Flat guide in the Z-axis - Central lubrication - Coolant pump - RS232 and PCMCIA interface - Bar graph display The machine can be inspected at our location in 78132 Hornberg by prior appointment. If you have any questions, require further technical information, or would like to arrange an inspection appointment, Arnd Sauter GmbH is always at your service. Subject to prior sale and errors.