Used Automated Handling Systems for sale (52,580)

Condition: repair required (used), Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E Bedpeda Ny Iefx Adrewp -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Condition: used, Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls Bedpfx Aeda Ny Hodrjwp -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm -Weight: 5 kg

Year of construction: 2021, condition: used, Karl Roll RUK0200-130-150-04 Automated part washing system (2021) The automatic cleaning system is used exclusively for cleaning and degreasing metal parts using aqueous media. Including a VE-Water supply 3x400V/50Hz-415kW/647A total connected power 2000x1300x1600mm batch size/workpiece carrier size (L x W x H) 8.0 batches/hour max. throughput with a batch weight of 300kg (including workpiece carrier) depending on the program 450 kg (carrier + goods) max. batch weight/The weight must be evenly distributed in the basket Cleaning station volume 7550 liters approx. Station 1 6900 liters approx. Station 2 6900 liters approx. Station 3 7500 liters approx. VE water tank Bodpfx Adey Uxvtorowp Heating - electric 96 kW Station 1 72 kW Station 2 72 kW Station 3 24 kW VE water tank 72 kW Hot air station 75 °C max. temperature cleaning baths 65°C max. temperature VE water tanks Process Station 1: Cleaning 1 in aqueous solution, hot Filter circuit with pressure monitoring Pressure recirculation device Fluid draining Oil separator Short stroke via trolley Re-dosing of 2 different media, Refilling directly or via pump cascade from station 2. Station 2: Rinse 1 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley Refilling directly or via pump cascade from station 3. Station 3: Rinse 2 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley DI water recirculation system, Refill directly. Station 4 on unloading track: Hot air drying Fans Heating coil with temperature monitoring Air supply via filter Adjustable Bypass exhaust air Condition: Very Good

Year of construction: 2020, condition: used, Manufacturer: Rocla Oy (Logisnext Group, Finland) Type: Automated Guided Vehicle (AGV) – counterbalanced model with bale clamp (AWTsc) Industrial Applications: Automated handling of bales, rolls, pallets or cylindrical loads in paper mills, packaging plants, logistics hubs, and automated warehouses. Designed for 24/7 operation in narrow aisle and high-density racking systems. Bodpfx Aow Ec Eajdrewp Main Technical Specifications: - Model: AGV AWTsc – 40TF8300E - Year: 2020 - Nominal capacity: - 3200 kg at 760 mm load center - 6400 mm lift height - Battery type: 420 Ah - Unladen weight: 4520 kg - Power supply: 24 V DC - Rated power consumption: 6.8 kW - Drive control: fully automated - Turning radius: compact for narrow aisles - Safety equipment: - 360° laser scanners - Obstacle detection sensors - Intelligent automatic braking - Control interface: centralized software-managed fleet system - Autonomy: ~8–16 hours (depending on battery configuration) Machine Usage The Rocla AWTsc is a heavy-duty AGV designed to handle bales or rolls without pallets using its integrated clamp. Its counterbalanced design enables rack access without side supports. It is ideal for environments requiring precise, repetitive handling of cylindrical loads and provides fully automated operation with zero human intervention. Features / Differentiators - Bale clamp attachment for direct roll/bale handling - Full autonomy with intelligent fleet control - High load and lift capacity (up to 3200 kg at 6.4 m) - Advanced safety package included as standard - Suitable for high-density and narrow aisle operations - Integrates easily with warehouse management systems (WMS)

Condition: used, Year of construction: 2026, distributed throughout the property, predominantly ceiling-mounted, with various roller conveyors, conveyor belts, inclined conveyors, switches, receiving and delivery stations, various drive motors, support elements, and control cabinets, predominantly in stainless steel, extensive stock of stainless steel roller conveyors. Bjdpfxezhazne Adrjwp

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 230 V, pneumatic connection: 10 bar, Description: For sale is an ASS automated industrial sewing workstation for Automatic Side Seam and Inseam Seamer, supplied as a complete production unit with long table, pneumatic automation, and integrated control system. The workstation has been used in a professional garment manufacturing environment and was operational prior to factory shutdown. It is designed for repetitive, high-precision sewing operations and significantly improves productivity and consistency compared to manual sewing setups. Includes: • ASS automated sewing workstation • Extra-long industrial sewing table • Integrated ASS control cabinet Bwjdpfx Adjy Ah Ubjrjp • Pneumatic system with hoses and actuators • Thread stands and guides • Industrial sewing head (installed) Condition: Used industrial condition. Operational prior to factory shutdown. Serviced on 27.2.2026. Sold as-is, where-is, without warranty. Inspection possible prior to dismantling. Typical applications: • Waistband sewing • Long straight seams • Hemming operations • Garment assembly lines Sales terms: This equipment is sold due to factory closure and is being liquidated directly from production use. The buyer is responsible for verifying the condition and ensuring suitability for their own materials and production processes. No claims will be accepted after the sale. Removal & transport: Buyer responsible for dismantling and transport. Video from working situation was taken on 5.3.2026. Ask for video.

Condition: excellent (used), Here, we offer you a TOX full-punch riveting system. TOX full-punch riveting system, type TZ-VSN. The full-punch rivet first severs all joining partners and then punches the rivet button out of the joining point. Bwsdpfx Adozdn S Tjrjp With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, expands its range of products and services with a forward-looking process. Full-punch riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight constructions and the joining of hybrid parts and assemblies. The rivet feeders, clamp and tool holders are also designed to be universal, so that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand clamps and TOX robot clamps. Type TZ-VSN Press force 55 kN Total stroke 140 mm Rivet type: diameter 5x4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone. Written orders can be placed by email or fax.

Condition: new, functionality: fully functional, In general Minimum diameter of the workpieces: 25 mm Maximum diameter of the workpieces :270 mm Minimum width of the side for hexagonal workpieces: 25 mm Maximum width of the side for hexagonal workpieces: 200 mm Maximum stacking height :2 x 350 mm Maximum stacking weight: 2 x 450 kg Width of the automation: 1,902 mm Depth of the automation :740 mm Height of the automation: 2,202 mm Total weight of the automation: 1,000 kg Electrical connection :380 VAC Pneumatic consumption :< 100 L / min Roboter Payload :25 kg / 19 kg net Bwsdpoh Dw Dijfx Adrep Payload :35 kg / 28 kg net Safety Standard Protection with laser scanner Protection with integrated wall Option Protection with light barrier Protection with separate grid wall Protection with separate transparent wall Protection with sliding doors

Condition: excellent (used), functionality: fully functional, operating hours: 100 h, KNAPP’s OSR Shuttle™ Evo automated shuttle system, designed for high-performance storage, order picking, and logistics flow management. This modular system enables flexible, scalable, and energy-efficient operation of modern warehouses. Key technical features: Type: AS/RS (Automated Storage and Retrieval System) Capacity: up to 50 kg per bin Installation height: up to 30 m Throughput: up to 1,000 dual cycles/hour Operation: 1D or 2D, depending on the configuration Components included (depending on configuration): OSR Shuttle™ shuttles Bwsdpjxtawtefx Adrsp High-density racking High-speed vertical lifts Order picking stations Connection accessories (conveyors, power supply, cabling, etc.) Environment: suitable for refrigerated zones (up to –28 °C) Applications: e-commerce, distribution, industry, pharmaceuticals, electronics, etc. Compatible with “goods-to-person” workstations and automated conveyor systems Quantity: 20 Price: €5,400.00 (excluding VAT) per shuttle

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2015020890, For sale is a magnetic filter system with integrated cleaning system. Filter systems of this type are usually made individually to order from customers. In this system, there is an exhibition purpose, which only served to show, and was hardly in use. product benefits Installation possible into existing production lines Separation of any ferrous metal contaminants Very corrosion resistant High wear resistance Compact design Low maintenance Technical details - 400 x 400 x 390 mm Bwodpecwghbofx Adrep - Inlet 260x260mm - Inlet 260x260mm - 8 pcs magnetic filter rods

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 3,900 mm, load capacity per storage section: 400 kg, Manufacturer: HÄNEL Model: Lean Lift Shelf dimensions: 3260/825mm Number of shelves: 25 Load capacity per shelf: 400 kg Rack height: 3.90m Year of manufacture: 2016 Operating hours (number of cycles): 22100 Maximum storage capacity: 40,000 kg Bedjy Dgkkepfx Adrjwp Control system: MP 12N-S Hänel The rack is in excellent condition with minimal signs of wear. This machine is highly recommended. We can arrange transportation and installation after purchase.

Condition: ready for operation (used), Year of construction: 1998, Fully automatic panel storage system offered. Suction traverse range: 1200x2655mm to 2100x4200mm, number of stacking positions: 36 pieces, stacking height surface storage system: 1600mm, stacking height storage position: approx. 400-600mm, control system: PLC. Equipped with integrated separate storage terminal, feed via robust roller conveyor, flexibly adjustable suction traverse. Overall dimensions X/Y/Z: approx. 33500mm/10100mm/3743mm. Inspection possible by appointment. Bwodpsy U Nqujfx Adrep

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is engineered for automated crack detection on ring-shaped components, such as bearing races and gears, utilizing the eddyvisor C. In addition to crack testing, customers can inspect for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot manipulates and guides the sensor precisely along the contours of the test part. Bjdpfxoyx E D Ee Adrswp Testing is conducted using up to two probes. All relevant scanning parameters and communication protocols for controlling the eddyvisor C are integrated into the robot scanning program. At the heart of the system is the eddyvisor C, a two-channel eddy current instrument, ensuring highly reliable detection of cracks and grinding burns. Process automation is achieved by an integrated Stäubli TX2-60 robot. The entire system is managed and operated via a control cabinet equipped with an integrated control and operating panel. A vertical spindle with chuck reliably clamps each test component during the inspection process. Non-conforming (NOK) parts identified during testing are automatically discharged to one of two designated NOK storage conveyors. Separate storage locations for reference and master parts facilitate calibration and ongoing quality assurance during operation. The system also incorporates the ibg Optical Reflection Sensor (iORS), enabling precise, non-contact inspection of rings.

Year of construction: 2009, condition: ready for operation (used), number of axes: 2, Main Drive Number of axis 2 This SCHÜCO ISOMAT 5 was manufactured in 2009. It features a robust machine construction, 10 lateral guide rollers, and a quick release mechanism on all guide rollers. Capable of processing profiles with depths up to 250 mm and heights up to 400 mm, it includes an ergonomically designed control panel and a safety cage for optimal operator safety. Reach out for more information. Bwedpjx D H D Uofx Adrop Application Types Other Automation Equipment

Condition: used, 2-axis pick-and-place unit, loader, servo robot, workpiece gripper, component insertion unit, pick-and-place robot Pick-up device, handling device for presses, lathes, etc. GETECHA, Type GL-20S Serial No. 13836, Year of manufacture 10/2003 Travel range, Z-axis: 1900 mm Travel range, Y-axis: 250 mm Travel speed, Z-axis: max. 1100 mm/sec. Travel speed, Y-axis: max. 227 mm/sec. Continuously variable travel speed in the Y and Z axes via servo motors SMB - Precise axis movement via linear guides - Control system: epis - Control panel located nearby - Interfaces for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic mode Bodoharwyepfx Adrjwp - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours: 25998 hrs. The unit was used as a loader/pick-up device on a press. Space requirement L x W x H: 2900 x 1800 x 2000 mm Weight: approx. 800 kg Good condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing operations Type: Handy-flex 200 Horizontal movement: 300 mm Vertical movement: 370 mm Load capacity: 10 to 14 kg Outreach: 250 to 550 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: Ø 26 mm oval with screw clamp - Movable in three axes (horizontal, vertical, rotational) - 1 unit balancer for vertical movement TECHNA, Type 9340, adjustment range 10 to 14 kg - Adjustable locking pawl for vertical movement, manual release via Bowden cable - For weightless suspension of small devices - Load capacity adjustable - Constant tensile force Bwodpfjfx Hxzex Adrep Space requirement L x W x H: 880 x 500 x 1120 mm Weight: 23 kg Good condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing applications Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm screw clamp Bwedpfxsfgpfms Adrop - Movable in three axes (horizontal, vertical, rotational) - Rotary encoder KÜBLER for rotational movement, type 8.5873.5320.B311.S003 - Linear position sensor BALLUFF for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 balancer units for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - for virtually weightless suspension of small devices - Load capacity adjustable in stages - Constant tensile force Space requirement L x W x H: 770 x 310 x 1200 mm Weight: 19 kg Good condition

Year of construction: 2013, condition: excellent (used), For sale is an automation robot of the brand Yaskawa and the type MH50 together with power cabinet and DX100 control system. The system was built by Krauss Maffei and used on a Netstal injection molding machine to sort parts. Operating manuals for DX100 control and operating and maintenance manuals for MH50 Digital available Technical data MH50: Position Model YASKAWA-MH50 Operating hours: approx. 14.000 Year of construction: 2013 Body: Standing Number of axles: 6 Load capacity: 50 kg repeatability: ±0,07 mm Working range S-axis (rotation): ±180° L-axis (lower arm): +135°, -90° U-axis (upper arm): +251°, -170° R-axis (hand roll): ±360° B-axis (wrist rotation/bend): +125° T-axis (hand rotation): ±360° Maximum speed S-axis: 3.14 rad/s, 180 °/s L axis: 3.11 rad/s, 178 °/s U axis: 3.11 rad/s, 178 °/s R axis: 4.36 rad/s, 250 °/s B axis: 4.36 rad/s, 250 °/s T axis: 6.28 rad/s, 360 °/s Permissible torque R-axis: 216 Nm Bwsdpfx Aon E Nhpodrop B axis: 216 Nm T axis: 147 Nm Permissible moment of inertia (GD2/4) R axis: 28 kgm2 B axis: 28 kgm2 T-axis: 11 kgm2 Weight approx. 550 kg Dimensions: See pictures On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: excellent (used), Year of construction: 2010, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 53 shelves, this results in a total storage area of ​​187.09 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 26,500 kg for all 53 shelves. Manufacturer: Modula Year of manufacture: 2010 Model: Modula Lift ML 50D Height: 6900 mm Carrier width: 4100 mm Carrier depth: 857 mm Bsdpfx Adox Rpm Uerjwp Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 70000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 53 Can be shortened to 4900 mm Dismantling costs of over €6000 already included Item location: 37308 Geisleden Product video 1 Product video 2 Datasheet: see Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de More articles New and used items are available in our shop! International shipping costs available upon request!

Year of construction: 2007, condition: ready for operation (used), Including documentation. Bodpfoifk Epjx Adrowp

Year of construction: 2006, condition: ready for operation (used), Three automatic small parts storage systems (AKL) Siemens Dematic SR-M100 are available. Storage locations: 19450, payload: 2x50kg per compartment, max. loading unit dimensions X/Y/Z: 600mm/400mm/320mm, travel speed: 200m/min, lifting speed: 120m/min, retrieval speed: 100m/min. On-site inspection is possible. Available from approx. Q4 2024. Bjdpfxjtvgqns Adrswp

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Bodjydd Acspfx Adrswp

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Bwedswb E Sbopfx Adrop

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Bjdpsxf Ur Aofx Adrewp Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Automation system of the Wittmann brand was newly installed in 2016 and used on a Netstal Synergy 2000. All documents, operating instructions, maintenance plans, measurement diagrams etc. included as well as control modules, power supply units and control panels. The Wittmann Picker can be used as a stand alone. TECHNICAL DETAILS travel X / Y / Z: 900 / 1800 / 3000 mm payload: 15 kg Scope of delivery: robot, console, support V/2614-3104, adapter, conveyor system standard MB belt, SE protective enclosure incl. safety door with SIPA Bwedpfx Aspm Htgedrep MACHINE DETAILS dimensions plant (LxWxH): 6560 x 4423 x 4154 mm Robot weight: 560 kg Mains connection: 3PH/N/PE mains voltage: 400 V tolerated voltage fluctuations: up to 10% connected load: 11 kVA frequency: 50-60 Hz tolerated frequency fluctuations: up to 2% supply line fuse: 16 A air pressure: max 6 bar maintenance of system functions: up to min 5 bar