Used Model Construction for sale (34,644)

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: RM2019003, Rolling mill for flattening wire. Manufacturer: Nantong Geron Intelligent Equipment R&D Co., Ltd. Brand: GEHI Model: GZYH19004 Rolling Mill Year of manufacture: 08/2019 Serial number: RM2019003 TECHNICAL SPECIFICATIONS Supply voltage: 380 V Frequency: 50 Hz Bwsdpfx Akez Infrenew Installed power: 200 kW Working speed: 0 – 150 m/min Feed material (wire): Ø ≤ 13 mm Machine dimensions: 18,000 × 3,000 × 2,000 mm Approximate weight: 10,000 kg DESCRIPTION GEHI GZYH19004 industrial rolling mill, designed for processing wire and round materials with a diameter of up to 13 mm. High-capacity industrial machine, equipped with an installed power of 200 kW and a working speed of up to 150 m/min, suitable for industrial applications and high-volume production lines. Heavy-duty construction, with a total length of approximately 18 meters, designed for continuous industrial operation and high-speed processing. MAIN DATA Model: GZYH19004 Year: 2019 Power: 200 kW Speed: up to 150 m/min Material diameter: up to Ø13 mm Weight: approx. 10 tons Dimensions: 18 × 3 × 2 m

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, maximum load weight: 1,200 kg, input voltage: 400 V, input frequency: 50 Hz, GEDA 1200 Z construction hoist – 1,200 kg lifting capacity For sale is a GEDA 1200 Z rack-and-pinion construction hoist for material transport on construction sites. Technical data: - Manufacturer: GEDA Bsdpfx Ae Ahx T Uoknjww - Model: 1200 Z - Year of manufacture: approx. 1997–2000; exact year of manufacture currently unknown - Maximum lifting capacity: 1,200 kg - Connection voltage: 400 V - Mains frequency: 50 Hz - Connection rating: 32 A - Platform dimensions according to drawing: approx. 1.43 × 3.37 m (width × length) Price and scope of delivery: The stated price applies exclusively to the hoist. If required, masts, platform doors and other accessories can be purchased at an additional cost.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, maximum load weight: 2,000 kg, input voltage: 400 V, input frequency: 50 Hz, GEDA 2000 Z construction hoist – 2,000 kg load capacity For sale is a GEDA 2000 Z rack-and-pinion construction hoist for material transport on construction sites. Technical data according to the available documentation: - Manufacturer: GEDA - Model: 2000 Z - Year of manufacture: approx. 1997–2000; exact year of manufacture currently unknown - Maximum load capacity: 2,000 kg - Connection voltage: 400 V - Mains frequency: 50 Hz Bwjdpfe Ahyy Sjx Aknjw - Platform dimensions according to drawing: approx. 1.43 × 3.60 m (width × length) Price and scope of delivery: The stated price applies exclusively to the hoist. If required, masts, platform doors, and other accessories can be purchased for an additional charge.

Year of construction: 2015, condition: used, 30" Russell Finex Vibratory Sieve | Model: 30530 Stainless Steel Complete with Vibrasonic 2000 Controller & 2 stainless steel wagons of spare screens Manufacturer: Russell Finex Equipment Type: Vibratory Sieve / Screening Machine Model: 30530 Screen Diameter: 30" (762 mm) Number of Decks: 3 Construction: Stainless Steel (S/S) Bwodpfe Ahrcwox Aknew Condition: Used

Condition: good (used), GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd GIC Gainsborough Engineering VFB2000 vertical form-fill-seal (VFFS) bagging machine, designed for automated weighing/bagging and packing of food products and other free-flowing products. Specification: Manufacturer: Gainsborough Engineering Ltd Brand: GIC Model: VFB2000 Type: Vertical Form-Fill-Seal (VFFS) bagging machine Sealing bars: 290 mm horizontal × 320 mm vertical Film reel width: 620 mm Current film width: 280 mm Forming tube: 80 mm diameter Suitable for integration with weighing/feed systems Bwsdpfszzzfusx Aknsw Stainless steel/food-processing construction Designed for continuous automatic bag forming, filling and sealing

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Bwsdpfx Ao Ah Dc Djknew Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: used, Klaas HV 26/6 KA Inclined Lift For sale is a fully hydraulic inclined lift (furniture lift/construction lift) from the reputable manufacturer Klaas. This unit is ideal for moving, roofing work, or general construction projects. The road approval is current, and the TÜV (German technical inspection) is valid until 12/2027. The UVV inspection (accident prevention regulations), which is important for commercial use, is also current and valid until 2027. Technical specifications: • Manufacturer: Klaas • Model/Type: HV 26/6 KA • TÜV valid until: 12/2027 • UVV inspection valid until: 2027 • Year of manufacture: 1994 • Max. lifting height: 26 meters • Chassis number: 9408071 • Permissible total weight: 1500 kg • Permissible axle load: 1500 kg • Maximum load capacity: 200 kg Technical specifications of the installed Klaas winches (year of manufacture 1994): • Winch 1 (Type L 1 – main winch): • Manufacturing No.: 1414 • Pulling force (lower/upper cable layer): 5500 N • Wire rope: Ø 9 mm | Strength: 1570 N/mm² | Calculated total breaking strength: 52 kN • Winch 2 (Type K 1): • Manufacturing No.: 834 • Pulling force (lower/upper cable layer): 3500 N • Wire rope: Ø 7 mm | Strength: 1570 N/mm² | Calculated total breaking strength: 27 kN • Winch 3 (Type S 1): • Manufacturing No.: 1504 • Drive unit: 2m • Pulling force (lower/upper cable layer): 3200 N • Wire rope: Ø 6 mm | Strength: 1570 N/mm² | Calculated total breaking strength: 19 kN Bodpfj Agfd Hex Aknsww "Everything from one source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 4033, overall weight: 800 kg, type of input current: AC, input voltage: 220 V, total width: 1,000 mm, total length: 10,000 mm, total height: 1,200 mm, Pitney Bowes Vantage Sorting System designed for high-volume mail processing, document handling and sorting operations. The system is engineered to scan, image and sort large volumes of mail using automated OCR, configurable sorting bins and piece-level tracking. This is a comprehensive industrial sorting system comprising eight sorting sections, multiple sorting bins, operator control panels and monitoring equipment. Information displayed on-site indicates a processing capacity of approximately 45,000 mail pieces per hour and approximately 30 million pieces annually. Depending on the configuration, the available specifications indicate maximum processing speeds of up to 46,300 No. 10 envelopes per hour or up to 50,000 postcards per hour. Manufacturer: Pitney Bowes / BlueCrest Model: STV1 Year: 2012 Product line: Vantage Sorting System Equipment type: Automated letter and mail sorting system Construction: Metal structure Bsdpozxbgaofx Akneww New one around 1,5 m. Euros Requests for proposals.

Condition: good (used), Year of construction: 2013, Drying and stoving oven TRO Model I, 60x90 Bwsdpsr Izh Usfx Aknow for fixing and drying textile inks, flock adhesives and baking sheet metal and aluminum signs, suitable for inserting drying racks with 50 grids, loading area 60 x 90 cm, good heat insulation, easy loading, temperature control via actual and setpoint thermostat, with overheating protection, usable space dimensions: approx. 108 cm wide x 78 cm deep x 166 cm high, external dimensions approx. 192 cm wide x 128 cm deep x 230 cm high, approved for paints and solvents up to hazard class A II, fixing and drying temperature: up to max. 180°C, not suitable for drying food, connection: 400V, 50Hz, 21kW, weight: approx. 685 kg. Used, year of construction 2013, good condition.

Condition: good (used), Year of construction: 1998, Model ... Vipros 20-50-50 Frame Construction ... Bridge Type Press Capacity ... 20 Tonnes (196kN) Press Type ... Servo Controlled Hydraulic Ram Axis Traverse Distance ... 1270 mm x 1270 mm Workable Max. Sheet Size . 1270 mm x 2540 mm (with auto repositioning) Maximum Material Thickness ... 6.35 mm Mild Steel Max. Material Weight ... 105 Kg Max. Material Weight (Max Speed) ... 62 Kg Bedpfx Aj Afdz Roknjww Max. Hole Dia. ... 88.9 mm Number Of Stations ... 31 Stations: 19 x 12.7 mm 6 x 31.7 mm 1 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 1 x 50.8 mm Axis Speed ... 82 m/min Hits Per Minute (2mm Pitch) ... 1000 H.P.M./2.5mm Stroke (25.4mm Pitch) ... 340 H.P.M./8mm Stroke Turret Speed Bi-Directional ... 35 R.P.M. Punching Accuracy ... ± 0.07 mm Punching Accuracy (High Accuracy Mode) ... ± 0.05 mm Repeatability ... ± 0.015 mm Ram Stroke Length (Maximum) ... 40 mm Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 22 kVA 400V +/- 10% 50 Hz Air Pressure Required ... 5.0 kgf/cm² Air Flow ... 250 1/min Machine Length ... 5030 mm Machine Width ... 2630 mm Machine Height ... 2160 mm Machine Weight ... 9200 kg NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 Axis Simultaneous + PHNC Tape Code ... EIA or ISO (Automatic Recognition) Programming Mode ... Absolute/incremental Min. Input ... 0.01 mm (0.01°) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 Digit T Function ... T - 3 Digit M Function ... M - 3 Digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb No. Of Programs ... 200 Machine Operation ... Memory Interface ... RS 232 C

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, load capacity: 280 kg, arm reach: 2,080 mm, controller manufacturer: KUKA, controller model: KRC4, The KUKA KR 280 R3080 Ultra is a high-performance 6-axis industrial robot from the QUANTEC series, offering a 280 kg payload capacity and a reach of 3080 mm. Designed for versatility, it excels in applications such as welding, material handling, palletizing, and machining. Its lightweight yet rigid construction ensures high precision, energy efficiency, and long-term reliability, even in demanding industrial environments. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR 280 R3080 Condition: Used Bwodew Na N Njpfx Aknew Year: 2018 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Bsdpeywgaxofx Akneww Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: used, Model DC850 SS Winkworth Double Cone Mixer Machine No. 5016 For gentle (low shear) blending of dry powders and granules. Stainless steel construction with polished internals. Conical shape ensures complete discharge of mixer. Total Volume - 1385 litre Max Working Volume - 850 litre Driven through gear and pinion by 7.5 kW motor with David Brown Radicon gearbox. Control Panel Approximate overall dimensions of mixer on support frame - 2300 mm long x 1750 mm wide x 2400 mm high. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list. Bwedpfx Akszvgm Tjnow

Condition: new, Year of construction: 2024, machine/vehicle number: 05004100140, Drying and Burn-in Furnace TRO, Model III For drying racks with max. 50rods, useable size 100x140cm, outer dimensions: approx. 2520mm wide x 1870mm deep x 2300mm high, useable space: approx. 1700x 1350x 1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539 (max. permitted solvent quantity: 110g per charge). Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: 1,000kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Bwodjh Tytbspfx Aknsw Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Layout: Crusher Bwodpfxjpl Ef Ne Aknsw Attachment suited for: Construction machines Selling price: € 1.950, US$ 2.053 Galen hydraulic breakers are user-friendly and tailored for all excavator sizes and models. Prioritizing breaking capability, Galen Breakers' high efficiency ensures rapid, safe, and productive operations. They are fuel-efficient due to their low flow/pressure design. Available in both small and medium variants, we offer 8 models weighing from 125-2750 kg, compatible with excavators from 1.5-30 tonnes. For detailed information and price inquiry please contact us

Condition: used, Used Zeppelin / Henschel Model FM1000 stainless steel high intensity mixer. Approximate capacity: 1,000 litre (product dependent). Stainless steel mixing chamber rated atmospheric pressure at 200°C. External mild steel heating / cooling jacket rated 5 bar pressure at 95°C. Unit includes 3-tier mixing attachment bottom driven by 250 kW, 1490 rpm, 280/660 V, 50/60 Hz motor. Has a top-clamped lid. Includes pneumatically operated discharge valve. Specifications: Bedpfx Ajzun Hfoknjww Bowl Volume (Capacity): 1,000 L Material of Construction: Stainless Steel Jacket [Y/N]: Yes Jacket pressure: 5 bar Motor Power: 250 kW

Condition: used, Used Brogli model MH-5 stainless steel vacuum process vessel. - Manufacturer: Brogli - Model: MH-5 Vessel: - Total capacity of vessel: 6,8 litre - Working capacity of vessel: 5 litre - Vessel rated: -1/0,5 bar - Jacket rated: 1 bar Mixing system "Multi-homo": - (1) anchor agitator with scrappers - (1) ribbon agitator - (1) homogenizer system Bodszbuibspfx Aknjww Includes: - control panel - heating unit - lowering/raising the vessel using a hand-operated wheel Specifications: Vacuum (Y/N): Y Capacity: 5 Material Of Construction: AISI 304 Jacket (Y/N): Y

Condition: new, functionality: fully functional, This advertisement is for informational purposes only and does not constitute a legally binding offer. Diesel Generators KINGWAY We offer new, high-quality KINGWAY diesel generators (Baudouin engine / Leroy-Somer generator) – ideal for construction, agriculture, industrial applications, and backup power supply. CE-compliant, robust, and reliable. ✅ Generator ATM 20 Price: €7,375 net €8,776.25 gross • Maximum Output ESP: 22.0 kVA / 18.0 kW • Rated Output PRP: 20.0 kVA / 16.0 kW • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 160 l • Consumption: 2.8 / 3.8 / 5.2 l/h (50/75/100%) • Weight (without fuel): 905 kg • Dimensions (L×W×H): 192 × 1000 × 1420 mm ✅ Generator ATM 60 Price: €11,165 net €13,286.35 gross • Maximum Output ESP: 66.0 kVA / 53.0 kW • Rated Output PRP: 60.0 kVA / 48.0 kW • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 260 l • Consumption: 7.6 / 11.2 / 15.1 l/h (50/75/100%) • Weight (without fuel): 1270 kg • Dimensions (L×W×H): 2400 × 1120 × 1650 mm ✅ Generator ATM 100 Price: €13,540 net €16,112.60 gross • Maximum Output ESP: 107.0 kVA / 86.0 kW • Rated Output PRP: 98.0 kVA / 78.0 kW • Rated Current: 141.0 A • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 255 l • Consumption: 7.7 / 11.1 / 15.0 l/h (50/75/100%) • Weight (without fuel): 1370 kg • Dimensions (L×W×H): 2400 × 1170 × 1670 mm ✅ Generator ATM 150 Price: €16,375 net €19,486.25 gross • Maximum Output ESP: 165.0 kVA / 132.0 kW • Rated Output PRP: 150.0 kVA / 120.0 kW • Rated Current: 217 A • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 890 l • Consumption: 15.9 / 23.0 / 30.2 l/h (50/75/100%) • Weight (without fuel): 2100 kg • Dimensions (L×W×H): 3310 × 1210 × 2210 mm ✅ Generator ATM 200 Price: Bwjdpfx Asyk Ebyjknsw €21,355 net €25,412.45 gross • Maximum Output ESP: 220.0 kVA / 176.0 kW • Rated Output PRP: 200.0 kVA / 160.0 kW • Rated Current: 289 A • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 980 l • Consumption: 22.2 / 32.1 / 43.1 l/h (50/75/100%) • Weight (without fuel): 3300 kg • Dimensions (L×W×H): 3990 × 1540 × 2510 mm Standard Equipment (varies by model): • ComAp IL-AMF25 controller • Brushless generator, digital AVR • Schneider main circuit breaker, engine pre-heater • Anti-vibration mounts, robust frame construction • CE-compliant For further information, technical details and additional options, please visit our website. Location: 84098 Hohenthann Delivery available Contact us by message

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Bjdpfxoq Nf Tve Aknjww Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: SIEMENS, Hydraulic stamping press manufactured in 2021. This ALTEK TARDIS Gen II Model 100 features a maximum working pressure of 160 bar and a furnace sill height of 1,200 mm. It includes 10 ALTEK 181S Type Rhino Cast Steel Dross Pans with a volume of 0.12 m³ each, along with fume dust filtration and Siemens control. If you are looking to get high-quality stamping capabilities, consider the ALTEK TARDIS Gen II Model 100 machine we have for sale. Contact us for further details. • Machine: Dross press • Max. working pressure: 160 bar • Furnace sill height: 1.200 m • Door width: 2.000 m Additional equipment Bwjdps Ah D Iyofx Aknsw • 10 pcs ALTEK 181S Type Rhino cast steel dross pans, volume 0.12 m³ (approx. 181 kg) • Fume dust filtration

Condition: refurbished (used), Lime Slaker Machine, GV-2, Continuous Lime Slaker, Quick Lime Slaker, Used Machine Manufacturer : Construction Machinery Enterprise - License Type : GV-2 Country of origin: Bulgaria Weight : 1,300 kg Capacity : For quick-slaking lime : 2 tonnes/hour For slow-slaking lime : 1.5 tonnes/hour Technical data : Drum speed : 10 rpm Electric motor : 8 kW, 68 rpm Bodpezpxkqofx Aknsww The machine structure and its components have been refurbished: Tank body and water jacket section, bearings, electric motor (new), machine frame. It has also received a new modern rotary joint on the water inlet side.

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Bwjdpfed I T Exsx Aknow Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Bwjdjvbdyfepfx Aknew Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: Bwjdpfjz N Sf Tjx Aknsw – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: used, Year of construction: 2013, Ashton Industrial model AIS-3350/XDIA D Refurb Edge Detection Unit/Arriser. Serial no: 8343 (2013) Location: These lots are located in Wellingborough, Northamptonshire, UK Bwodpfx Ae Afwwgsknew