THT assembling machine

Fuji S-FAB50

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Wemhöner VARIOPRESS Vacuum Membrane Press Basic 1000 S Gbodov Np H Hjpfx An Rol Technical Specifications: Heating platen size (mm): 2850 x 1550 Electric heating platen design: Aluminum, top heating platen Total pressing force (kN): 2400 Max. chamber pressure (bar): 6 Max. operating temperature: 180 degrees Celsius Max. batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film in roll form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system Godpfx Ansuiy Nyj Robl - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software Gsdpfxjw Rdvve An Rsbl • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. The device has no defects or quirks and is fully functional. Further information available on request!

Condition: good (used), Year of construction: 2014, DIP TECH GlassJet NOVO digital printer: Print resolution: 720 dpi Ink color: black, similar to etching, white and other spot colors Maximum glass size: 2200x1200 mm (width x height) Minimum glass size: 400 x 400 mm Glass thickness: 2-19mm Print speed: up to 30 m2/h (in the context of 8 print heads for one color) Number of required operators: one Overall dimensions: 2,500 x 4,700 x 2,000 mm (width x length x height) Gedpoiukuujfx An Robl Image format: All common image file formats including: PDF, PS, EPS, TIff, BMP, JPEG Ambient temperature 18-25 degrees Celsius Power supply: Single-phase 400VAC x 16A 50/60 Hz

Condition: excellent (used), Year of construction: 2018, Extremely fast and precise inspection for high-volume production Z resolution 0.5 µm Z range Up to 30 mm (1.2") Angled view cameras Number of megapixel cameras 8 Orthogonal camera Resolution 10 µm Field of view 50mm x 50mm (2" x 2") Inspection speed Up to 65 cm2/s Software User interface Viscom vVision/EasyPro SPC Viscom SPC (statistical process control), open interface (optional) Verification station Viscom vVerify/HARAN Remote diagnosis Viscom SRC (software remote control) (optional) Programming station Viscom PST34 (optional) System computer Operating system Windows® Processor Intel® Core™ i7 PCB handling PCB dimensions 508 mm x 508 mm (20" x 20") Transport height 850 - 950 mm ± 20 mm (33.5" - 37.4" ± 0.8") Width adjustment Automatic Transport type Single track transport Gbjdowkfuujpfx An Rol PCB clamping Pneumatic Upper transport clearance 50 mm (2") Lower transport clearance 45 mm (1.8"), up to 85 mm (3.3") optional; 40mm (1.6") with PCB support Other system data Positioning/handling unit Synchronous linear motors Interfaces SMEMA Power requirements 400 V (other voltages on request), 3P/N/PE, 8 A, 4 - 6 bar working pressure System dimensions 994 mm x 1565 mm x 1349 mm (39.1" x 61.6" x 53.1") (W x H x D) Weight 720 kg (1587 lbs

Year of construction: 2014, condition: good (used), Machine in operational condition with following specification: Dual-stage 2 x HM Head 2 x ScanCamera 2 x MultiCamera 2 x Nozzle Station 4 x FES32 Godjvfpmljpfx An Rsbl Traceability package Ask for additional information!

Condition: used, Year of construction: 2001, table length 600 mm table width 380 mm control FANUC 16i-M longitudinal travel 500 mm cross travel 300 mm largest grinding diameter 230 mm Jig grinding machine | HAUSER - S35-400 Gjdpfowmwwyjx An Rebl The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Gbodpfxerhkp Eo An Rsl Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Gsdsn Htktspfx An Robl

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Distance between tips : 400 [mm] - Effective diameter : 180 [mm] LINEAR AXES Godpfxovxw A Us An Robl - X1 and X2 x Z travel : 220 [mm] - Z travel : 850 [mm] - X x Z resolution : 0.0001 [mm] TURRET : - Number of fixed positions : 12 - Tool holders : VDI30 WHEEL CARRIER - Right-hand external grinding : * Grinding wheel dimensions (Ø x width x bore) : 400 x 50 x 127 [mm] * Drive power : 6.8 [kW] WORKPIECE CARRIER - Max. speed : 7500 [rpm] - Speeds (synchronous operation) : 1 - 5000 [rpm] - Taper type : CM4 - Drive power : 10.5 [kW] - C axis : 0.001 [°] SYNCHRONIZED COUNTER SPINDLE - Max. speed : 7500 [rpm] - Rotational speeds (synchronous operation) : 1 - 5000 [rpm] - C axis : 0.001 [°] - Inner cone : MK4 - Micrometric adjustment : +/- 40 [microns] - Drive power : 10.5 [kW] POWER SUPPLY - Power rating : 45 [KVA] DIMENSIONS - Floor dimensions : 2800 x 3960 [mm] - Machine weight : 7600 [kg] MACHINE HOURS - Powered hours : 57000 [h] EQUIPMENT - NC FANUC 310i-modelA - Software Studer WIN - RS232 / USB interface - Remote electronic handwheel - Turret with Renishaw LP2 length self-calibration device - Marposs feelers for diameters (multirange) + Z4 axes for positioning - Semi-automatic wheel balancing MPM.3 BMT100 M.24 - 480 L coolant tank * with paper filter * with magnetic filter - Chip conveyor - Fog extraction - Cooling unit for grinding wheel motor cooling - Electronic contact detection Dittel AE6000 - Fixed dressing device on workhead - Electrical cabinet air conditioning - Balancing shaft - Interface for automatic loading system