Used Defective Winding Machine for sale (66,586)

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm Itodpfx Aji Huvhebnek -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Itedpfxjvripys Abnok

Condition: used, machine/vehicle number: 85252. und 85122, Coil winding machine Aumann WG 85253 Itjdeylztujpfx Abnek Winding diameter 160 mm, laying width 550 mm Wire guide DF 50 No. 85099 defective Coil winding machine Aumann PW 85122 Winding diameter 100 mm, laying width 200 mm Wire guide DF 70 No. 85115

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 81882 F, Winding machine Stollberg type WAD No. 81882 F Disc 440 mm ø Iedjylwvfjpfx Abnjtk Revolution counter 220 Volt

Condition: ready for operation (used), A Sahm precision cross winder 260E is offered. Traverse width stroke: 300mm, winding speed max.: 500m/min, bobbin diameter: up to 320mm, bobbin volume max.: approx. 22.4dm³, titer range: tapes: approx. 150dtex - 3500dtex, monofilaments diameter: 0.15mm - 0.60mm. Inspection by appointment possible. Itedsyk Hcfjpfx Abnsk

Year of construction: 2017, condition: ready for operation (used), Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement. Itsdpfezta Eqjx Abnsk

Condition: ready for operation (used), A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January. Itjdpfxexwyvwo Abnok

Year of construction: 1985, condition: ready for operation (used), 2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985 and 1998. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible. The machines are not located in Europe. Iodpfx Abeyk Hclsnstk

Condition: like new (used), Year of construction: 2023, functionality: unexamined, machine/vehicle number: 230102, Ladies and Gentlemen, on behalf of our customer, we are selling the model ES-500X ELCOMA wrapping machine described and photographed here. We will be happy to provide you with the exact specifications for this winding machine by e-mail. Also available via WhatsApp. This is an advertisement for information purposes only. Ijdpfxorvz H Ie Abnotk The purchase contract can only be concluded at the specified location of the purchased item.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4755, input voltage: 380 V, Winding machine suitable for the production of low-voltage transformers, coils, electromagnets, and various types of linear windings. Isdpjy Enk Iofx Abnetk

Year of construction: 1996, condition: ready for operation (used), A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible. Iedpfx Abjyttxfsnjtk

Condition: excellent (used), Year of construction: 2016, For sale: three professional wrapping robots for flexible and efficient pallet wrapping. Available from stock: a Cyklop CSM Robot PRS from 2016, a Cyklop GL robot from 2013, and a Robopac S6 from 2017. All machines are suitable for various pallet sizes and ideal for companies that require flexibility and reliability in their logistics process. Cyklop CSM Robot PRS This mobile wrapping robot from 2016 is equipped with a new battery from 10-2024 and operates completely independently around the pallet. Key features: - Mobile wrapping robot suitable for all pallet sizes - Powered pre-stretch system for efficient film saving - Automatic height detection - Adjustable wrapping programs - Ready for immediate use thanks to the new battery - €3950 Cyklop GL robot A compact and reliable wrapping robot that is very suitable for variable pallet dimensions and irregular loads. Key features: - Flexible application for various pallet types - Simple operation - Suitable for intensive daily use - Suitable for nets - New batteries - €3450 Robopac S6 A modern and powerful wrapping robot with extensive setting options. Key features: - Advanced wrapping programs - Suitable for high wrapping heights and variable loads - Reliable and stable operation - Equipped with a film cutter, which cuts the film at the end of the wrapping cycle - €3950 Condition of the machines All three machines are in good condition, fully functional, and ready for immediate use. Videos of the machines can be sent via WhatsApp. We also supply wrapping film. For more information, please feel free to contact us. Trade-in of a (defective) pallet wrapper is possible. See also my other advertisements. Iodpezbyc Tefx Abnotk Film wrapper, pallet wrapper, wrap machine, wrapping machine, pallet wrapping machine, wrapper, robot wrapper, wrapping robot, robot wrapper, wrapper, film, wrapper.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Ijdpexpq T Rjfx Abnetk Adjustable external electronic rewind Variable speed drive up to 450 meters per minute. • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Guarding to suit current C.E. requirements

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Iedpsu H R Iqsfx Abnotk Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: ready for operation (used), Year of construction: 2002, A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Iedpfsxa Eizjx Abnetk

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 847, Bobifil winding machine 4-ply flyer with reversing beam Isdpfjylm Uqsx Abnjtk 2 units available

Year of construction: 1993, condition: ready for operation (used), Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools. Itjdpfxsn I T Tgo Abnsk

Condition: like new (used), Year of construction: 2023, functionality: unexamined, machine/vehicle number: 230101, Ladies and Gentlemen, on behalf of our customer, we are selling the model ES-950SF ELCOMA wrapping machine described and photographed here. We will be pleased to provide you with the exact specifications for this winding machine by e-mail. Also available via WhatsApp. This is an advertisement for information purposes only. The purchase contract can only be concluded at the specified location of the purchased item. Itjdpfsrvz R Djx Abnek

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 9792. Meteor 12 Nr. 1565, Winding machine with 2 spindles Ijdpfxsylnzle Abnotk Wire up to 0.2 mm Siemens Meteor 12 Type WBMT 001 No. 1565 Winding diameter 60 mm, laying width 80 mm

Condition: used, Year of construction: 2022, functionality: fully functional, power: 2.2 kW (2.99 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 190 mm, overall weight: 2,000 kg, Description CNC milling machine (wood router), Schreinerei Bessler Holzfräse Speed 3021, with control console including monitor and keyboard. Ijdpfx Aszvnazobnotk Specifications: Designation: CNC milling machine Type: Speed 3021 Serial number: 2022398 Operating voltage: 400 V Motor power: 2.2 kW Year of manufacture: 2022 Total weight: 2,000 kg X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 190 mm Tool holder: ER20 Spindle speed: 1,000 to 24,000 rpm Working dimensions: 3,000 x 2,100 mm Overall (transport) dimensions: approx. 415 x 296 x 175 cm Machine weight: 2,000 kg Configuration: Gantry construction with work table Control console on mobile unit Extraction hose included Condition: Used Dismantled

Condition: used, Year of construction: 2000, VILIS Wickler - Pallet wrapping machine, used 🧰 Product features • Model: VILIS • Condition: good condition, used Iodpfx Aszqfulobnotk • Color: black, orange • Year of manufacture: 2000 • Dimensions: 4150 x 1500 x 2500 mm • Turntable: 75 mm high • Weight: approx. 250 kg • Power: 1300 watts • Voltage: 400 V • Load capacity: max. 1200 kg 💰 Price € 1790,- net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by arrangement We always have over 5000 meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex works.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 meters of racking immediately available • 20,000 m² of storage and steel mezzanine platforms immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump sum purchase: Purchase of goods, equipment & complete inventory including complete clearance. 2. Commission auction: Carrying out auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Year of construction: 2024, condition: excellent (used), functionality: fully functional, For sale: A total of 5 winding machines (Model XDW-612, year of manufacture 2024). These machines are specially designed for yarn rewinding purposes. Details: - Model: XDW-612 - Year of manufacture: 2024 - Each machine has 12 winding positions - Highly suitable for yarn and textile processing - Spare and wear parts available and included in the offer The machines can be purchased individually or as a complete package. Ideal for small to medium-sized production facilities or workshops that require yarn in various formats. Itjdpfx Abexqm Hcjnok Location: Münster Price: €2,100.00 – negotiable per machine If interested or if you have any questions, feel free to contact us. Viewing by appointment possible.

Year of construction: 1995, condition: ready for operation (used), A winding machine SAHM for the textile industry is available. Heads: 182, core: 90mm, stroke: 400mm. Conversion to 200/250 is possible. On-site inspection is possible. Iedpfx Aswtg Etebnjtk

Condition: used, machine/vehicle number: Nr. 84064. Nr. 86016 Nr. 82013, 3 winding machines, 4-fold flyer Itodjylzurspfx Abnok Winding diameter: 40 mm, laying width: 150 mm Max. wire diameter: 1.0 mm HKW 2/7 no. 82013, 4-fold reversing bar Tool EI 84/20/5

Condition: ready for operation (used), machine/vehicle number: 90002, Kandula coil winding machine FDW 500/2 Max. spool: 200 x 300 mm Max. wire: 1.5 mm Itjdpfx Aeyll Agebnsk