Laser Marker

CENCORP LM700

Condition: used, Laser ACSYS Lasertechnik GmbH PIRANHA II Multi FL20s Dodpfju E U Tnsx Akcscg

Condition: used, Year of construction: 2015, Technical details: turning diameter: 65 mm turning length: 120 mm control: Index C200-4D SL z-axis main spindle travel: 390 mm z-axis subspindle travel: 390 mm x-axis subspindle travel: 600 mm Travel Y1: ± 80 mm Travel y2: ± 80 mm x-axis rapids: 45 m/min y-axis rapids: 15 m/min z-axis rapid travel: 45 m/min Spindle 1 RPM: 5000 1/min Spindle 1 Power: 35,5/27,5 kW Spindle 1 Torque: 170 /125 Nm Spindle 2 RPM: 5000 1/min Spindle 2 power: 35,5/27,5 kW Spindle 2 torque: 170/125 Nm c-axis: 0,00014 ° bar material dia.: 65 mm spindle nose: AD 140 spindle bore: 85 mm Milling spindle 1 RPM: 18000 1/min Milling spindle 1 power: 11 kW Milling Spindle1 torque: 19 Nm Milling spindle 2 RPM: 18000 1/min Milling Spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axes swivel angle: 230 ° B-axes torque: 440 Nm B-axes angle resolution: 0,001 ° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 tool magazine static tools : 6 x VDI 25 internal coolant system feed: Knoll 80 bar / Ecofluid weight of the machine ca.: 16,3 t dimensions of the machine ca.: 3,73x2,92x2,58 m Accerories Chip conveyor Spindle 1 Chuck SMW HFKN 165-46 mm Spindle 2 Chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck subspindle Hainbuch Spanntop Barfeeder Interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main- and sub-spindle Conveyor for partsdisposal Air Filter Büchel High performance heavy duty turning and milling center with 2 multi axis milling heads and two spindles. Both milling heads are full 5-axis. The z-axes are installed in the spindle heads Dodpsyxpadofx Akcocg The x2 axis is installed in the spindle head of the subspindle Milling1 head has x/y/b -axes Milling head 2 has y/b-axes Both milling heads have B-(Swivel-)axis 230° The machine is equipped with an IRCO short barfeeder and parts gripper for finished parts. Max. dim for finished parts: Ø 65 mm, length 120 mm, weight 5 kg. Rest piece length 200 mm All linear- axes are equipped with linear scales. Coolant through main and subspindle. Tool breakage control from drill Ø 1mm All existing tool from machine are part of delivery Machine is in excellenten Condition! *

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of cooling: air, laser wavelength: 1,064 nm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Dcodewlc Stjpfx Akcjg Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: used, Year of construction: 2016, Laser type: PowerLine F100 Technical data: Travel distances of linear axes X/Y/Z axis: 800 / 300 / 300 mm Max. workpiece weight: 30 kg Heating, Ventilation, Air Conditioning: Operating temperature: 25°C +/- 10°C Storage temperature: 5°C to +40°C Ambient conditions: non-condensing, non-corrosive, frost-free Dcjdpoxqp Rdsfx Akcjg Air electrical section: 160 m³/h Pneumatic supply: Medium: filtered, oil-free compressed air Max. permissible operating pressure: 6 bar Temperature range: -10° to +60°C Laser safety class: Laser Class 1 according to EN (IEC) 60825-1:2007 Marking field size of the laser: 120 x 120 mm Operating and storage conditions: Floor load capacity: min. 500 kg/m² Clearance above: 2 m for ventilation Transport height: min. 2 m Room height: min. 2.50 m Electricity: Input fuse (protection): 3 x 16 A Nominal voltage: 400 V (+/-10%); 3P; N; PE Nominal frequency: 50/60 Hz; neutral conductor loaded Power consumption: 4 kVA (at 50 Hz) Size and weight: Width1): 1.50 m plus swivel arm max. 0.8 m (width without monitor) Length1): 1.80 m plus swivel arm 0.5 m (length without monitor) Height standing workstation: 1.20 m Working height: 0.96 m (standing workstation) Required space and volume 2): Width: 3.00 m Length: 2.50 m Height: 2.20 m (standing workstation) Area: 7.50 m² Weight, approx.: 1500 kg 1) Width, length, and area of the laser processing machine may vary depending on the adjustment of the optional swivel arm. 2) The necessary space and volume do not include potential aisle space! The operator must define the safety distances around the machine in accordance with national occupational health and safety regulations. Operating and storage conditions: - No direct sunlight - Do not place near radiators - Avoid strong temperature fluctuations - Do not install in areas with high dust levels - Do not install in areas with high levels of oil, solvent, or cleaning agent vapors

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC Machining Center Kunzmann WF 600 CNC Control: Heidenhain iTNC 530 Year of manufacture: 2014 Operating hours: approx. 55 h Internal machine no.: 52 Machine from a training workshop / as new condition Travel paths: X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Tool holder: SK 40 DIN69871 Spindle speed: 1 - 5,000 rpm Accessories - Touch probe - Machine vice - Tools Dcsdpfxoy A H Rue Akcog

Year of construction: 2011, condition: ready for operation (used), A CNC laser marking and engraving system for component marking is available. Laser class: 1, laser type: diode-pumped Yb laser, laser power: 20W, axis travel X/Y/Z: 390mm/560mm/275mm, max. workpiece dimensions X/Y/Z: 730mm/365mm/445mm, max. workpiece weight: 50kg, control system: AC-Laser. Documentation available. An on-site inspection is possible. Dsdjyuyvtepfx Akcscg

Condition: good (used), Year of construction: 2015, operating hours: 26,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, Equipment: chip conveyor, Posmill C 800 Kompakt Year of manufacture: 2015 Very well maintained condition! The machine was used exclusively for dry machining of plastics! + 4th / 5th axis Lehmann Edition 2 / 500 Kombiflex 4th axis swivels 360° 5th axis tilts 90° + Coolant tank and internal coolant supply (unused) Dodpfsy Ni U Nsx Akcecg TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 520 mm Travel Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24 positions Table size: 950 x 520 mm Control: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating hours Machine power-on hours: approx. 26,000 hrs Spindle: approx. 16,000 hrs Note: The clamp on the Lehmann rotary table is not included in the offer.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 16010799, grinding length: 600 mm, grinding width: 350 mm, table load: 400 kg, grinding spindle speed: 3,000 rpm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Submission of a bid obligates timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Max. grinding area: 600 x 350 mm Magnet dimensions: 600 x 350 mm Max. longitudinal table travel: 660 mm Max. cross travel: 360 mm Max. distance table to spindle centre: 525 mm Max. table load: 400 kg Table speed: 2 to 28 m/min Rapid traverse cross: 1 m/min Automatic cross feed: 3 to 40 mm Cross handwheel per revolution: 1.2 mm Cross handwheel increment: 0.01 mm Vertical rapid feed: 180 mm/min Grinding wheel dimensions: 300 x 25 x 76.5 mm Spindle speed: 100 to 3,000 rpm MACHINE DETAILS Electrical Data Operating voltage: 400 V Frequency: 50 Hz Dedjxni Abspfx Akcjcg Connected load: 8 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,300 x 2,500 mm Weight: 2,500 kg EQUIPMENT Includes three-axis digital readout