Condition: used, Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Dkolorc E E Aoing Sxsl Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish.

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, piston pump -Case material: stainless steel -Drive: 11 kW -Speed: 1750 rpm -Pump Vickers PVB10 RSV31 CG20 -Liter output: approx. 36 L/min Dkolieb A Hcneng Sxol -Pressure: 210 bar -Hydraulic valve -Filter -Hydraulic tank dimensions: 500/450/H370 mm -Dimensions: 520/330/H600 mm -Weight: 320 kg

Condition: used, Used stainless steel cutter/mill by Urschel Laboratories (USA) Comitrol Processor model 1700. Machine is designed for size reduction of free-flowing, dry and semi-dry, products and is equipped with microcut head. Urschel Comitrol Processor 1700 is able to work on three types of heads - slicing head, cutting head or microcut head. Machine is driven by 22,3 kW, 2955 rpm, 380 V, 50 Hz electric motor. Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm length x 900 mm wide x 1800 mm high, weight approx 500 kg. Dksling Sjrdgxbsxol

Condition: used, Used Brogtec (CH) model MH-8 stainless steel homogenizing mixer. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Dkelinsrdgyvog Sxjl Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotations from 2755 up to 5379 rpm. Mixer is equipped with local vaccum pump and heating device by GMK type teco 60. Machine has local control panel.

Condition: used, Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Dksling Sordgzzjxsl Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in pharmaceutical industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

Condition: used, Second hand stainless steel contact parts twin shaft planetary dissolver by Molteni type TM5 RP.SV. Mixer has stainless steel jacketed mixing pan with internal diameter 207 mm x depth 213 mm. Total volume of pan is 7 l, working volume about 5 l. Dkjliordg Icsng Sxjl Mixing pan has side wall bottom discharge outlet. Mixer has two agitators with toothed discs and one wall scrapper. Toothed discs have diameter 100 mm and are driven by vari speed gearbox and two speed el. motor 1.75/1.4 kW, 2800/1400 rpm, 380 V, 50 hz, in EEx-d II B T4. Working rotation of disc agitators manually adjustable in range from 300 up to 4800 rpm. Wall scrapper is driven by el motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz (design EEx-d II B T5) through reducer with ratio i= 44.77, what gives output rotation at 32 rpm. Agitators are risen by hydraulical device driven by el. motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz, EEx-d II B T5 design. Machine is equipped with local control panel and pneumatic vacuum pump by Piab. Machine is mounted on steel mobile cabinet. Additional equipment included with mixer: pneumatically operated press for emptying mixing pan, stand for emptying/cleaning mixing pan.

Condition: used, Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Dolinovtqz Hjg Sxokl Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included.

Condition: used, Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 kW, 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Dkeling Sjrdg A Uoxol Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, raised and lowered by two hydraulical actuators. Together with mixer there are: - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices.

Condition: used, Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is driven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Dolingevtq Akj Sxokl Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.

Condition: used, Used, universal mixer/cutter by Stephan (DE) model UMC5. Mixing chamber designed in stainless steel has total volume 6 l. Working volume in range from 0,5 up to 3 l. Mixing chamber is rated for work on pressure -1 bar, at temperature +95 C. It has stainless steel heating jacket with volume 0,7 l, rated for work on atmospheric pressure and temperature up to +95 C. Top cover designed in polyphenylsulfon (PPSU), has installed manually operated scrapper agitator. Main agitator is equipped with cutting knife, designed in non-corrossive steel and is bottom driven by el. motor with power 0,78 KW, 230 V, 50 hz. Working rotation of agitator adjustable in range from 300 up to 3000 rpm. Mixer has local control panel and is equipped with water ring vacuum pump by Stephan type VYI2-GRD.006, water flow - 1.4 l/min. Pump is driven by el motor 0.12 kW. Dkslinovtq A Rog Sxol There is also electric heating device by Thermo Haake model P5 type 003-5009. All items mounted on mobile stainless steel table. Mixer last time had been used in food industry.

Condition: used, Used mobile vertical stainless steel AISI 316L aseptic reactor with a total capacity of 240 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Djlerc E H Ioing Sxskl Reactor has a working volume of 160 l and is designed to operate at pressures ranging from -1 to 3 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 16 l and is designed to operate at pressures ranging from 0 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 680 mm, length of straight wall line 530 mm. Reactor has open hinged dished top, bolted with clamps. The top equipped with an inspection manway with an internal diameter of 250 mm and 7 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA. At the bottom, a NovAseptic magnetic stirrer type GMP 500 is installed, driven by gears (ratio i=7) and an electric motor. with a power of 0.25 kW, 2740 rpm, 50 Hz. The agitator operates in the speed range from 80 to 410 rpm and is suitable for mixing liquid products with a viscosity of up to 800 cP. The reactor is mounted on 4 legs equipped with wheels. The device is equipped with an ele. cabinet with a product temperature display and a stirrer speed display with a potentiometer for its adjustment. The equipment includes full technical documentation of the manufacturer and UDT in polish.

Condition: used, Year of construction: 2007, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, Delinjrdg Dksg Sxskl - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Dkelingordg Nds Sxjl Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped with stainless steel electric control panel. Technical documentation included.

Condition: used, Used carbon steel grinding mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Delingevtqmce Sxskl Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.

Condition: used, Used universal mixer/cutter by Robot Coupe (FR) model R60. Machine has stainless steel mixing bowl with internal dimensions: diameter 45 cm x length of straight side 38 cm. Dksling Sordgv Doxjl Total volume 60 l. Working output - maximal batch for emulsifing 36 kg, maximal batch for chopping - up to 25 kg, maximal batch on dough (60% hydrated) - up to 30 kg. Machine has bottom driven shaft with three cutting curve knives. Shaft is driven by 11/7.6 kW, 2875/1445 rpm, 400 V, 50 hz el. motor. Working rotation speeds - 1500 rpm and 3000 rpm. Working time cycle adjustable from 1 to 4 minutes. Top is covered with polycarbonate lid, closed on clamp. Missing lid wiper. Manual tilt discharge. Machine is mounted on stainless steel supporting frame. Last time used in food industry

Condition: used, Year of construction: 2013, Used line for production compacted cosmetic powders by Co.Pack (IT). Dkelerdg Hqsing Sxjl Line is working on pans with diameter 58.5 mm - output up to 1500 pcs/hour, and pans with diameter 36.5 mm - output up to 3200 pcs/hour. Line consist of: - automatic, vibrating feeder of pans. - pressing machine Co.Pack , Rotopack 100 PS/4 - automatic powder feeder, hydraulic press and automatic discharge. - station for cleaning bottoms and edges of pans - packaging station - where pans are packed into plastic trays. Line is new 2013.

Condition: used, Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Deling Sovtqlfexokl Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifting/tilt device for work on rectangular containers with volume 200 l and width 655 mm. Lifting device is operated hydraulically. Machine has technical documentation. Last time used in food industry.

Condition: used, Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Delingordgy Io Sxskl Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

Condition: as good as new (ex-display), 4 available. Unused ZVU Strojirny approximately 89,520 litre total capacity & 73,500 litre working capacity 316L stainless steel vertical reactor. Unit measures approximately 4,100mm internal diameter x 5,750mm straight side (tan to tan). Unit has welded dished top and bottom heads. Internal rated 6 bar/full vacuum design pressure at 170 deg.c. Has external half-pipe coil jacket on bottom half of straight side and bottom dished head rated 10 bar/full vacuum design pressure at 170 deg.c. Unit has top entry 316L stainless steel 4-blade agitator driven by ABB 350kw, 1500rpm, 3/50 motor through SPX Flow type 7000N350V gearbox with reduction ratio of 7.94/1 giving approximately 189rpm output. Reactor body is mounted on (4) 304 stainless steel side supports. Unit built in 2021 and currently stored nitrogen purge. Dkolingsvtqcdo Sxjl

Condition: new, Unused compaction and granulation equipment. The equipment was built in 2016 but never used and is still stored in original packaging. Major equipment for (2) lines includes: Dkoling Sevtp R Texjl - (2) Compactors (Ludman model 4440) with approximate capacity of 150 tons/hour each. - (2) Granulators (Ludman model 1672-1) with approximate capacity of 37.9 ton/hour each. - Feed system (vibration feeder and twin screw). - VFD motors and hydraulic units.

Condition: used, Used Viessmann type Vitoplex 200 hot water boiler. Heating capacity rated 900kw at 6 bar pressure with maximum 100 deg.c. Includes Oilon model GP-90 M biogas burner. Djling Ssvtn Haexekl Includes various heat exchanger, pumps, values & instrumentation all housed in Energytech container. Has double membrane type Tecon Biogas 215 gas holder. Approximate capacity 660cumt with an operating pressure at 33mbar.

Condition: used, Used Praj Industries approximately 10m litre/year (approximately 1,211 litre/hour) ethanol recovery system. Dkelingsvtn Uqo Sxjl Includes, pre-heaters, degassifying column, Ethanol distillation column with 20 sieve plates in stripping section and 20 bubble plates in rectifying section, forced circulation reboiler, 2 x main condensers, distillate condensate collection tank, 2 x pre-distillate condensers, pre-distillate collection tank, vacuum pump, scrubber and various pumps, valves, instrumentation and pipework.

Condition: new, Year of construction: 2018, Unused and installed De Lema type DLST/L dry heat steriliser / depyrogenation unit with Hosokawa Micron dispensing isolator. De Lema unit designed at 250 deg.c. for the depyrogenation of dry aluminium canisters with cycle time of approximately 7 hours. Tray capacity between 15 & 35 canisters per tray depending on size. The Hosokawa unit designed for filling canisters with powder including closure and bagging of canisters. Dispensing time is approximately 1.33kgs/min depending on product, number of operators, distribution of canister size and filling volume. Total makespan between 22.9 minutes to 29 minutes depending on product and canister size. The system was designed to handle the following size canisters: - 2.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 144mm - 6.25 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 309mm - 12.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 383mm - 32 litre with neck diameter 116mm, body diameter 300mm, height (w/o closure) 539mm Delingsuafg Se Sxjkl System installed and commissioned but has never been operated on any products. Further technical specifications, additional information and site inspections are available upon request.

Condition: used, 5 available. Little used Nakkila Works Oy approximately 601,000 litre stainless steel (1.4162 & 1.4307) vertical mixing vessels. Last used as fermentation vessels. Unit measures approximately 6,800mm diameter x 16,550mm straight side. Unit has welded dished top and welded cone bottom heads. Manufactured in hygienic design. Dolisvtn Tgjng Sxokl Internal rated atmospheric working pressure at 35 deg.c. External is insulated and clad. Includes side entry stainless steel agitator with drive/motor. Vessel is mounted on stainless steel skirt.

Condition: used, Used Paques type Biopaq IC Anaerobic Digestor. S ystem includes main BIOPAQ reactor designed for Internal Circulation, Closed. Approximate capacity 248cumt, approximate height of 23,000mm. System was used for COD components metabolization to biogas (methane & co2) with an approximate efficiency of 90%. System includes recirculation degassing tank, gas flare and associated pumps, valves & instrumentation. Dsling Sovtn Eioxokl